@@ -23,7 +23,7 @@
#include "vp.h"
#include "powerdomain.h"
#include "clockdomain.h"
-#include "prm2xxx.h"
+#include "prm2xxx_3xxx_private.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
@@ -18,7 +18,7 @@
#include "common.h"
#include "powerdomain.h"
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx_3xxx_private.h"
#include "prm-regbits-24xx.h"
#include "clockdomain.h"
@@ -52,53 +52,6 @@
#include <linux/io.h>
#include "powerdomain.h"
-/* Power/reset management domain register get/set */
-static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
- return __raw_readl(prm_base + module + idx);
-}
-
-static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- __raw_writel(val, prm_base + module + idx);
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
- s16 idx)
-{
- u32 v;
-
- v = omap2_prm_read_mod_reg(module, idx);
- v &= ~mask;
- v |= bits;
- omap2_prm_write_mod_reg(v, module, idx);
-
- return v;
-}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- u32 v;
-
- v = omap2_prm_read_mod_reg(domain, idx);
- v &= mask;
- v >>= __ffs(mask);
-
- return v;
-}
-
-static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
/* These omap2_ PRM functions apply to both OMAP2 and 3 */
extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
new file mode 100644
@@ -0,0 +1,77 @@
+/*
+ * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_PRIVATE_H
+#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_PRIVATE_H
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm2xxx_3xxx.h"
+
+#ifndef __ASSEMBLER__
+
+#include <linux/io.h>
+#include "powerdomain.h"
+
+/* Power/reset management domain register get/set */
+static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+ return __raw_readl(prm_base + module + idx);
+}
+
+static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __raw_writel(val, prm_base + module + idx);
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+ s16 idx)
+{
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ omap2_prm_write_mod_reg(v, module, idx);
+
+ return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
+
+#endif /* __ASSEMBLER */
+
+#endif
@@ -23,7 +23,7 @@
#include "vp.h"
#include "powerdomain.h"
#include "prm3xxx.h"
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx_3xxx_private.h"
#include "cm2xxx_3xxx_private.h"
#include "prm-regbits-34xx.h"
#include "cm3xxx.h"
Internal version contains the direct register access macros and should only be used by PRCM drivers. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/mach-omap2/prm2xxx.c | 2 +- arch/arm/mach-omap2/prm2xxx_3xxx.c | 2 +- arch/arm/mach-omap2/prm2xxx_3xxx.h | 47 ----------------- arch/arm/mach-omap2/prm2xxx_3xxx_private.h | 77 ++++++++++++++++++++++++++++ arch/arm/mach-omap2/prm3xxx.c | 2 +- 5 files changed, 80 insertions(+), 50 deletions(-) create mode 100644 arch/arm/mach-omap2/prm2xxx_3xxx_private.h