diff mbox series

[net-next,v3,2/3] net: phy: dp83869: support Wake on LAN

Message ID 20200903114259.14013-3-dmurphy@ti.com
State Superseded
Headers show
Series None | expand

Commit Message

Dan Murphy Sept. 3, 2020, 11:42 a.m. UTC
This adds WoL support on TI DP83869 for magic, magic secure, unicast and
broadcast.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/net/phy/dp83869.c | 128 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 128 insertions(+)

Comments

Andrew Lunn Sept. 10, 2020, 6:02 p.m. UTC | #1
> > >   static int dp83869_config_port_mirroring(struct phy_device *phydev)
> > >   {
> > >   	struct dp83869_private *dp83869 = phydev->priv;
> > Overall this code looks quite similar to dp83867, is there no way to
> > factor this out?
> 
> Factor what out?  Yes the DP83867 and DP83869 are very similar in registers
> and bitmaps.  They just differ in their feature sets.
> 
> The WoL code was copied and pasted to the 869 and I would like to keep the
> two files as similar as I can as it will be easier to fix and find bugs.

It will be even easier if they shared the same code. You could create
a library of functions, like bcm-phy-lib.c.

  Andrew
Dan Murphy Sept. 10, 2020, 6:21 p.m. UTC | #2
Andrew

On 9/10/20 1:02 PM, Andrew Lunn wrote:
>>>>    static int dp83869_config_port_mirroring(struct phy_device *phydev)
>>>>    {
>>>>    	struct dp83869_private *dp83869 = phydev->priv;
>>> Overall this code looks quite similar to dp83867, is there no way to
>>> factor this out?
>> Factor what out?  Yes the DP83867 and DP83869 are very similar in registers
>> and bitmaps.  They just differ in their feature sets.
>>
>> The WoL code was copied and pasted to the 869 and I would like to keep the
>> two files as similar as I can as it will be easier to fix and find bugs.
> It will be even easier if they shared the same code. You could create
> a library of functions, like bcm-phy-lib.c.

If I do that I would want to add in the DP83822 and the DP83811 as well 
even though the SOP and Data registers are different the code is the same.

I can just pass in the register numbers in.

That will have to be something I refactor later as it will rip up at 
least 4 TI drivers if not more.

Dan
diff mbox series

Patch

diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
index 48a68474f89c..5045df9515a5 100644
--- a/drivers/net/phy/dp83869.c
+++ b/drivers/net/phy/dp83869.c
@@ -4,6 +4,7 @@ 
  */
 
 #include <linux/ethtool.h>
+#include <linux/etherdevice.h>
 #include <linux/kernel.h>
 #include <linux/mii.h>
 #include <linux/module.h>
@@ -27,6 +28,13 @@ 
 #define DP83869_RGMIICTL	0x0032
 #define DP83869_STRAP_STS1	0x006e
 #define DP83869_RGMIIDCTL	0x0086
+#define DP83869_RXFCFG		0x0134
+#define DP83869_RXFPMD1		0x0136
+#define DP83869_RXFPMD2		0x0137
+#define DP83869_RXFPMD3		0x0138
+#define DP83869_RXFSOP1		0x0139
+#define DP83869_RXFSOP2		0x013A
+#define DP83869_RXFSOP3		0x013B
 #define DP83869_IO_MUX_CFG	0x0170
 #define DP83869_OP_MODE		0x01df
 #define DP83869_FX_CTRL		0x0c00
@@ -105,6 +113,14 @@ 
 #define DP83869_OP_MODE_MII			BIT(5)
 #define DP83869_SGMII_RGMII_BRIDGE		BIT(6)
 
+/* RXFCFG bits*/
+#define DP83869_WOL_MAGIC_EN		BIT(0)
+#define DP83869_WOL_PATTERN_EN		BIT(1)
+#define DP83869_WOL_BCAST_EN		BIT(2)
+#define DP83869_WOL_UCAST_EN		BIT(4)
+#define DP83869_WOL_SEC_EN		BIT(5)
+#define DP83869_WOL_ENH_MAC		BIT(7)
+
 enum {
 	DP83869_PORT_MIRRORING_KEEP,
 	DP83869_PORT_MIRRORING_EN,
@@ -156,6 +172,115 @@  static int dp83869_config_intr(struct phy_device *phydev)
 	return phy_write(phydev, MII_DP83869_MICR, micr_status);
 }
 
+static int dp83869_set_wol(struct phy_device *phydev,
+			   struct ethtool_wolinfo *wol)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	u16 val_rxcfg, val_micr;
+	u8 *mac;
+
+	val_rxcfg = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_RXFCFG);
+	val_micr = phy_read(phydev, MII_DP83869_MICR);
+
+	if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_UCAST |
+			    WAKE_BCAST)) {
+		val_rxcfg |= DP83869_WOL_ENH_MAC;
+		val_micr |= MII_DP83869_MICR_WOL_INT_EN;
+
+		if (wol->wolopts & WAKE_MAGIC) {
+			mac = (u8 *)ndev->dev_addr;
+
+			if (!is_valid_ether_addr(mac))
+				return -EINVAL;
+
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFPMD1,
+				      (mac[1] << 8 | mac[0]));
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFPMD2,
+				      (mac[3] << 8 | mac[2]));
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFPMD3,
+				      (mac[5] << 8 | mac[4]));
+
+			val_rxcfg |= DP83869_WOL_MAGIC_EN;
+		} else {
+			val_rxcfg &= ~DP83869_WOL_MAGIC_EN;
+		}
+
+		if (wol->wolopts & WAKE_MAGICSECURE) {
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFSOP1,
+				      (wol->sopass[1] << 8) | wol->sopass[0]);
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFSOP2,
+				      (wol->sopass[3] << 8) | wol->sopass[2]);
+			phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFSOP3,
+				      (wol->sopass[5] << 8) | wol->sopass[4]);
+
+			val_rxcfg |= DP83869_WOL_SEC_EN;
+		} else {
+			val_rxcfg &= ~DP83869_WOL_SEC_EN;
+		}
+
+		if (wol->wolopts & WAKE_UCAST)
+			val_rxcfg |= DP83869_WOL_UCAST_EN;
+		else
+			val_rxcfg &= ~DP83869_WOL_UCAST_EN;
+
+		if (wol->wolopts & WAKE_BCAST)
+			val_rxcfg |= DP83869_WOL_BCAST_EN;
+		else
+			val_rxcfg &= ~DP83869_WOL_BCAST_EN;
+	} else {
+		val_rxcfg &= ~DP83869_WOL_ENH_MAC;
+		val_micr &= ~MII_DP83869_MICR_WOL_INT_EN;
+	}
+
+	phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RXFCFG, val_rxcfg);
+	phy_write(phydev, MII_DP83869_MICR, val_micr);
+
+	return 0;
+}
+
+static void dp83869_get_wol(struct phy_device *phydev,
+			    struct ethtool_wolinfo *wol)
+{
+	u16 value, sopass_val;
+
+	wol->supported = (WAKE_UCAST | WAKE_BCAST | WAKE_MAGIC |
+			WAKE_MAGICSECURE);
+	wol->wolopts = 0;
+
+	value = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_RXFCFG);
+
+	if (value & DP83869_WOL_UCAST_EN)
+		wol->wolopts |= WAKE_UCAST;
+
+	if (value & DP83869_WOL_BCAST_EN)
+		wol->wolopts |= WAKE_BCAST;
+
+	if (value & DP83869_WOL_MAGIC_EN)
+		wol->wolopts |= WAKE_MAGIC;
+
+	if (value & DP83869_WOL_SEC_EN) {
+		sopass_val = phy_read_mmd(phydev, DP83869_DEVADDR,
+					  DP83869_RXFSOP1);
+		wol->sopass[0] = (sopass_val & 0xff);
+		wol->sopass[1] = (sopass_val >> 8);
+
+		sopass_val = phy_read_mmd(phydev, DP83869_DEVADDR,
+					  DP83869_RXFSOP2);
+		wol->sopass[2] = (sopass_val & 0xff);
+		wol->sopass[3] = (sopass_val >> 8);
+
+		sopass_val = phy_read_mmd(phydev, DP83869_DEVADDR,
+					  DP83869_RXFSOP3);
+		wol->sopass[4] = (sopass_val & 0xff);
+		wol->sopass[5] = (sopass_val >> 8);
+
+		wol->wolopts |= WAKE_MAGICSECURE;
+	}
+
+	if (!(value & DP83869_WOL_ENH_MAC))
+		wol->wolopts = 0;
+}
+
 static int dp83869_config_port_mirroring(struct phy_device *phydev)
 {
 	struct dp83869_private *dp83869 = phydev->priv;
@@ -531,6 +656,9 @@  static struct phy_driver dp83869_driver[] = {
 		.ack_interrupt	= dp83869_ack_interrupt,
 		.config_intr	= dp83869_config_intr,
 
+		.get_wol	= dp83869_get_wol,
+		.set_wol	= dp83869_set_wol,
+
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 	},