diff mbox series

[v6,6/6] irqchip: qcom-pdc: Reset PDC interrupts during init

Message ID 1601267524-20199-7-git-send-email-mkshah@codeaurora.org
State Accepted
Commit d7bc63fa20b8a3b0d0645bed1887848c65c01529
Headers show
Series irqchip: qcom: pdc: Introduce irq_set_wake call | expand

Commit Message

Maulik Shah Sept. 28, 2020, 4:32 a.m. UTC 
Kexec can directly boot into a new kernel without going to complete
reboot. This can leave the previous kernel's configuration for PDC
interrupts as is.

Clear previous kernel's configuration during init by setting interrupts
in enable bank to zero. The IRQs specified in qcom,pdc-ranges property
are the only ones that can be used by the new kernel so clear only those
IRQs. The remaining ones may be in use by a different kernel and should
not be set by new kernel.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/irqchip/qcom-pdc.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index acc0620..bd39e9d 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -341,7 +341,8 @@  static const struct irq_domain_ops qcom_pdc_gpio_ops = {
 
 static int pdc_setup_pin_mapping(struct device_node *np)
 {
-	int ret, n;
+	int ret, n, i;
+	u32 irq_index, reg_index, val;
 
 	n = of_property_count_elems_of_size(np, "qcom,pdc-ranges", sizeof(u32));
 	if (n <= 0 || n % 3)
@@ -370,6 +371,14 @@  static int pdc_setup_pin_mapping(struct device_node *np)
 						 &pdc_region[n].cnt);
 		if (ret)
 			return ret;
+
+		for (i = 0; i < pdc_region[n].cnt; i++) {
+			reg_index = (i + pdc_region[n].pin_base) >> 5;
+			irq_index = (i + pdc_region[n].pin_base) & 0x1f;
+			val = pdc_reg_read(IRQ_ENABLE_BANK, reg_index);
+			val &= ~BIT(irq_index);
+			pdc_reg_write(IRQ_ENABLE_BANK, reg_index, val);
+		}
 	}
 
 	return 0;