@@ -86,6 +86,15 @@ pmic@1 {
#address-cells = <1>;
#size-cells = <0>;
+ pm8994_lpg: lpg {
+ compatible = "qcom,pm8994-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
pm8994_spmi_regulators: regulators {
compatible = "qcom,pm8994-regulators";
};
@@ -19,6 +19,17 @@ pmi8994_gpios: gpios@c000 {
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pmi8994_mpps: mpps@a000 {
+ compatible = "qcom,pm8994-mpp";
+ reg = <0xa000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>;
+ };
};
pmic@3 {
@@ -27,6 +38,15 @@ pmic@3 {
#address-cells = <1>;
#size-cells = <0>;
+ pmi8994_lpg: lpg@b100 {
+ compatible = "qcom,pmi8994-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
pmi8994_spmi_regulators: regulators {
compatible = "qcom,pmi8994-regulators";
#address-cells = <1>;
The pm8994 contains a 6 LPG channels and the pmi8994 contains 4 MPP channels and a 4 channel LPG, with TRILED and LUT blocks. Add nodes for these blocks. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v4: - Replaced msm8996 with pm(i)8994 in subject arch/arm64/boot/dts/qcom/pm8994.dtsi | 9 +++++++++ arch/arm64/boot/dts/qcom/pmi8994.dtsi | 20 ++++++++++++++++++++ 2 files changed, 29 insertions(+)