diff mbox

[RFC,12/12] mmc: mmci: Add Qcom specific pio_read function.

Message ID 1398116978-31772-1-git-send-email-srinivas.kandagatla@linaro.org
State New
Headers show

Commit Message

Srinivas Kandagatla April 21, 2014, 9:49 p.m. UTC 
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

MCIFIFOCNT register behaviour on Qcom chips is very different than the other
pl180 integrations. MCIFIFOCNT register contains the number of
words that are still waiting to be transferred through the FIFO. It keeps
decrementing once the host CPU reads the MCIFIFO. With the existing logic and
the MCIFIFOCNT behaviour, mmci_pio_read will loop forever, as the FIFOCNT
register will always return transfer size before reading the FIFO.

This patch implements qcom_pio_read function so as existing mmci_pio_read is
not suitable for Qcom SOCs.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/mmc/host/mmci.c |   31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 8fcd8ef..585888e 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1047,6 +1047,29 @@  mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 	}
 }
 
+static int mmci_qcom_pio_read(struct mmci_host *host, char *buffer,
+			 unsigned int remain)
+{
+	uint32_t	*ptr = (uint32_t *) buffer;
+	int		count = 0;
+	struct variant_data *variant = host->variant;
+	int		fifo_size = variant->fifosize;
+
+	if (remain % 4)
+		remain = ((remain >> 2) + 1) << 2;
+
+	while (readl(host->base + MMCISTATUS) & MCI_RXDATAAVLBL) {
+		*ptr = readl(host->base + MMCIFIFO + (count % fifo_size));
+		ptr++;
+		count += sizeof(uint32_t);
+
+		remain -=  sizeof(uint32_t);
+		if (remain == 0)
+			break;
+	}
+	return count;
+}
+
 static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain)
 {
 	void __iomem *base = host->base;
@@ -1168,8 +1191,12 @@  static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 		remain = sg_miter->length;
 
 		len = 0;
-		if (status & MCI_RXACTIVE)
-			len = mmci_pio_read(host, buffer, remain);
+		if (status & MCI_RXACTIVE) {
+			if (host->hw_designer == AMBA_VENDOR_QCOM)
+				len = mmci_qcom_pio_read(host, buffer, remain);
+			else
+				len = mmci_pio_read(host, buffer, remain);
+		}
 		if (status & MCI_TXACTIVE)
 			len = mmci_pio_write(host, buffer, remain, status);