@@ -1054,62 +1054,6 @@ static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len,
return len;
}
-
-#ifdef CONFIG_PM
-static void dma40_backup(void __iomem *baseaddr, u32 *backup,
- u32 *regaddr, int num, bool save)
-{
- int i;
-
- for (i = 0; i < num; i++) {
- void __iomem *addr = baseaddr + regaddr[i];
-
- if (save)
- backup[i] = readl_relaxed(addr);
- else
- writel_relaxed(backup[i], addr);
- }
-}
-
-static void d40_save_restore_registers(struct d40_base *base, bool save)
-{
- int i;
-
- /* Save/Restore channel specific registers */
- for (i = 0; i < base->num_phy_chans; i++) {
- void __iomem *addr;
- int idx;
-
- if (base->phy_res[i].reserved)
- continue;
-
- addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA;
- idx = i * ARRAY_SIZE(d40_backup_regs_chan);
-
- dma40_backup(addr, &base->reg_val_backup_chan[idx],
- d40_backup_regs_chan,
- ARRAY_SIZE(d40_backup_regs_chan),
- save);
- }
-
- /* Save/Restore global registers */
- dma40_backup(base->virtbase, base->reg_val_backup,
- d40_backup_regs, ARRAY_SIZE(d40_backup_regs),
- save);
-
- /* Save/Restore registers only existing on dma40 v3 and later */
- if (base->gen_dmac.backup)
- dma40_backup(base->virtbase, base->reg_val_backup_v4,
- base->gen_dmac.backup,
- base->gen_dmac.backup_size,
- save);
-}
-#else
-static void d40_save_restore_registers(struct d40_base *base, bool save)
-{
-}
-#endif
-
static int __d40_execute_command_phy(struct d40_chan *d40c,
enum d40_command command)
{
@@ -2996,8 +2940,8 @@ failure1:
}
/* Suspend resume functionality */
-#ifdef CONFIG_PM
-static int dma40_pm_suspend(struct device *dev)
+#ifdef CONFIG_PM_SLEEP
+static int dma40_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct d40_base *base = platform_get_drvdata(pdev);
@@ -3008,6 +2952,69 @@ static int dma40_pm_suspend(struct device *dev)
return ret;
}
+static int dma40_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct d40_base *base = platform_get_drvdata(pdev);
+ int ret = 0;
+
+ if (base->lcpa_regulator)
+ ret = regulator_enable(base->lcpa_regulator);
+
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_PM
+static void dma40_backup(void __iomem *baseaddr, u32 *backup,
+ u32 *regaddr, int num, bool save)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ void __iomem *addr = baseaddr + regaddr[i];
+
+ if (save)
+ backup[i] = readl_relaxed(addr);
+ else
+ writel_relaxed(backup[i], addr);
+ }
+}
+
+static void d40_save_restore_registers(struct d40_base *base, bool save)
+{
+ int i;
+
+ /* Save/Restore channel specific registers */
+ for (i = 0; i < base->num_phy_chans; i++) {
+ void __iomem *addr;
+ int idx;
+
+ if (base->phy_res[i].reserved)
+ continue;
+
+ addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA;
+ idx = i * ARRAY_SIZE(d40_backup_regs_chan);
+
+ dma40_backup(addr, &base->reg_val_backup_chan[idx],
+ d40_backup_regs_chan,
+ ARRAY_SIZE(d40_backup_regs_chan),
+ save);
+ }
+
+ /* Save/Restore global registers */
+ dma40_backup(base->virtbase, base->reg_val_backup,
+ d40_backup_regs, ARRAY_SIZE(d40_backup_regs),
+ save);
+
+ /* Save/Restore registers only existing on dma40 v3 and later */
+ if (base->gen_dmac.backup)
+ dma40_backup(base->virtbase, base->reg_val_backup_v4,
+ base->gen_dmac.backup,
+ base->gen_dmac.backup_size,
+ save);
+}
+
static int dma40_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -3034,29 +3041,14 @@ static int dma40_runtime_resume(struct device *dev)
base->virtbase + D40_DREG_GCC);
return 0;
}
-
-static int dma40_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct d40_base *base = platform_get_drvdata(pdev);
- int ret = 0;
-
- if (base->lcpa_regulator)
- ret = regulator_enable(base->lcpa_regulator);
-
- return ret;
-}
+#endif
static const struct dev_pm_ops dma40_pm_ops = {
- .suspend = dma40_pm_suspend,
- .runtime_suspend = dma40_runtime_suspend,
- .runtime_resume = dma40_runtime_resume,
- .resume = dma40_resume,
+ SET_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume)
+ SET_PM_RUNTIME_PM_OPS(dma40_runtime_suspend,
+ dma40_runtime_resume,
+ NULL)
};
-#define DMA40_PM_OPS (&dma40_pm_ops)
-#else
-#define DMA40_PM_OPS NULL
-#endif
/* Initialization functions. */
@@ -3753,7 +3745,7 @@ static struct platform_driver d40_driver = {
.driver = {
.owner = THIS_MODULE,
.name = D40_NAME,
- .pm = DMA40_PM_OPS,
+ .pm = &dma40_pm_ops,
.of_match_table = d40_match,
},
};
Converting to the PM macros makes us simplify and remove some code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- drivers/dma/ste_dma40.c | 150 ++++++++++++++++++++++------------------------- 1 file changed, 71 insertions(+), 79 deletions(-)