@@ -420,7 +420,7 @@ bimc: interconnect@400000 {
restart@4ab000 {
compatible = "qcom,pshold";
- reg = <0x4ab000 0x4>;
+ reg = <0x004ab000 0x4>;
};
pcnoc: interconnect@500000 {
@@ -443,7 +443,7 @@ snoc: interconnect@580000 {
msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
- reg = <0x1000000 0x300000>;
+ reg = <0x01000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&msmgpio 0 0 122>;
@@ -457,28 +457,28 @@ gcc: clock-controller@1800000 {
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- reg = <0x1800000 0x80000>;
+ reg = <0x01800000 0x80000>;
};
tcsr_mutex: hwlock@1905000 {
compatible = "qcom,tcsr-mutex";
- reg = <0x1905000 0x20000>;
+ reg = <0x01905000 0x20000>;
#hwlock-cells = <1>;
};
tcsr: syscon@1937000 {
compatible = "qcom,tcsr-msm8916", "syscon";
- reg = <0x1937000 0x30000>;
+ reg = <0x01937000 0x30000>;
};
rpm_msg_ram: memory@60000 {
compatible = "qcom,rpm-msg-ram";
- reg = <0x60000 0x8000>;
+ reg = <0x00060000 0x8000>;
};
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
+ reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
@@ -492,13 +492,13 @@ blsp1_uart1: serial@78af000 {
a53pll: clock@b016000 {
compatible = "qcom,msm8916-a53pll";
- reg = <0xb016000 0x40>;
+ reg = <0x0b016000 0x40>;
#clock-cells = <0>;
};
apcs: mailbox@b011000 {
compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
- reg = <0xb011000 0x1000>;
+ reg = <0x0b011000 0x1000>;
#mbox-cells = <1>;
clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
clock-names = "pll", "aux";
@@ -507,7 +507,7 @@ apcs: mailbox@b011000 {
blsp1_uart2: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78b0000 0x200>;
+ reg = <0x078b0000 0x200>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
@@ -788,8 +788,8 @@ sdhc_2: sdhci@7864000 {
usb: usb@78d9000 {
compatible = "qcom,ci-hdrc";
- reg = <0x78d9000 0x200>,
- <0x78d9200 0x200>;
+ reg = <0x078d9000 0x200>,
+ <0x078d9200 0x200>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
@@ -837,67 +837,67 @@ timer@b020000 {
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
- reg = <0xb020000 0x1000>;
+ reg = <0x0b020000 0x1000>;
clock-frequency = <19200000>;
frame@b021000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb021000 0x1000>,
- <0xb022000 0x1000>;
+ reg = <0x0b021000 0x1000>,
+ <0x0b022000 0x1000>;
};
frame@b023000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb023000 0x1000>;
+ reg = <0x0b023000 0x1000>;
status = "disabled";
};
frame@b024000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb024000 0x1000>;
+ reg = <0x0b024000 0x1000>;
status = "disabled";
};
frame@b025000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb025000 0x1000>;
+ reg = <0x0b025000 0x1000>;
status = "disabled";
};
frame@b026000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb026000 0x1000>;
+ reg = <0x0b026000 0x1000>;
status = "disabled";
};
frame@b027000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb027000 0x1000>;
+ reg = <0x0b027000 0x1000>;
status = "disabled";
};
frame@b028000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb028000 0x1000>;
+ reg = <0x0b028000 0x1000>;
status = "disabled";
};
};
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
- reg = <0x200f000 0x001000>,
- <0x2400000 0x400000>,
- <0x2c00000 0x400000>,
- <0x3800000 0x200000>,
- <0x200a000 0x002100>;
+ reg = <0x0200f000 0x001000>,
+ <0x02400000 0x400000>,
+ <0x02c00000 0x400000>,
+ <0x03800000 0x200000>,
+ <0x0200a000 0x002100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
@@ -918,7 +918,7 @@ rng@22000 {
qfprom: qfprom@5c000 {
compatible = "qcom,qfprom";
- reg = <0x5c000 0x1000>;
+ reg = <0x0005c000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
tsens_caldata: caldata@d0 {
@@ -931,8 +931,8 @@ tsens_calsel: calsel@ec {
tsens: thermal-sensor@4a9000 {
compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
- reg = <0x4a9000 0x1000>, /* TM */
- <0x4a8000 0x1000>; /* SROT */
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
nvmem-cell-names = "calib", "calib_sel";
#qcom,sensors = <5>;
@@ -946,8 +946,8 @@ apps_iommu: iommu@1ef0000 {
#size-cells = <1>;
#iommu-cells = <1>;
compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x1e20000 0x40000>;
- reg = <0x1ef0000 0x3000>;
+ ranges = <0 0x01e20000 0x40000>;
+ reg = <0x01ef0000 0x3000>;
clocks = <&gcc GCC_SMMU_CFG_CLK>,
<&gcc GCC_APSS_TCU_CLK>;
clock-names = "iface", "bus";
@@ -980,7 +980,7 @@ gpu_iommu: iommu@1f08000 {
#size-cells = <1>;
#iommu-cells = <1>;
compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x1f08000 0x10000>;
+ ranges = <0 0x01f08000 0x10000>;
clocks = <&gcc GCC_SMMU_CFG_CLK>,
<&gcc GCC_GFX_TCU_CLK>;
clock-names = "iface", "bus";
@@ -1039,8 +1039,8 @@ opp-19200000 {
mdss: mdss@1a00000 {
compatible = "qcom,mdss";
- reg = <0x1a00000 0x1000>,
- <0x1ac8000 0x3000>;
+ reg = <0x01a00000 0x1000>,
+ <0x01ac8000 0x3000>;
reg-names = "mdss_phys", "vbif_phys";
power-domains = <&gcc MDSS_GDSC>;
@@ -1063,7 +1063,7 @@ mdss: mdss@1a00000 {
mdp: mdp@1a01000 {
compatible = "qcom,mdp5";
- reg = <0x1a01000 0x89000>;
+ reg = <0x01a01000 0x89000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
@@ -1095,7 +1095,7 @@ mdp5_intf1_out: endpoint {
dsi0: dsi@1a98000 {
compatible = "qcom,mdss-dsi-ctrl";
- reg = <0x1a98000 0x25c>;
+ reg = <0x01a98000 0x25c>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
@@ -1145,9 +1145,9 @@ dsi0_out: endpoint {
dsi_phy0: dsi-phy@1a98300 {
compatible = "qcom,dsi-phy-28nm-lp";
- reg = <0x1a98300 0xd4>,
- <0x1a98500 0x280>,
- <0x1a98780 0x30>;
+ reg = <0x01a98300 0xd4>,
+ <0x01a98500 0x280>,
+ <0x01a98780 0x30>;
reg-names = "dsi_pll",
"dsi_phy",
"dsi_phy_regulator";
@@ -1289,7 +1289,7 @@ wifi {
tpiu: tpiu@820000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0x820000 0x1000>;
+ reg = <0x00820000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1307,7 +1307,7 @@ tpiu_in: endpoint {
funnel0: funnel@821000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x821000 0x1000>;
+ reg = <0x00821000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1348,7 +1348,7 @@ funnel0_out: endpoint {
replicator: replicator@824000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0x824000 0x1000>;
+ reg = <0x00824000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1384,7 +1384,7 @@ replicator_in: endpoint {
etf: etf@825000 {
compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x825000 0x1000>;
+ reg = <0x00825000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1410,7 +1410,7 @@ etf_out: endpoint {
etr: etr@826000 {
compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x826000 0x1000>;
+ reg = <0x00826000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1428,7 +1428,7 @@ etr_in: endpoint {
funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x841000 0x1000>;
+ reg = <0x00841000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1476,7 +1476,7 @@ funnel1_out: endpoint {
debug0: debug@850000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x850000 0x1000>;
+ reg = <0x00850000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
@@ -1485,7 +1485,7 @@ debug0: debug@850000 {
debug1: debug@852000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x852000 0x1000>;
+ reg = <0x00852000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
@@ -1494,7 +1494,7 @@ debug1: debug@852000 {
debug2: debug@854000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x854000 0x1000>;
+ reg = <0x00854000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
@@ -1503,7 +1503,7 @@ debug2: debug@854000 {
debug3: debug@856000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x856000 0x1000>;
+ reg = <0x00856000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
@@ -1512,7 +1512,7 @@ debug3: debug@856000 {
etm0: etm@85c000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x85c000 0x1000>;
+ reg = <0x0085c000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1533,7 +1533,7 @@ etm0_out: endpoint {
etm1: etm@85d000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x85d000 0x1000>;
+ reg = <0x0085d000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1554,7 +1554,7 @@ etm1_out: endpoint {
etm2: etm@85e000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x85e000 0x1000>;
+ reg = <0x0085e000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1575,7 +1575,7 @@ etm2_out: endpoint {
etm3: etm@85f000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x85f000 0x1000>;
+ reg = <0x0085f000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
@@ -1598,7 +1598,7 @@ etm3_out: endpoint {
/* CTI 0 - TMC connections */
cti0: cti@810000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x810000 0x1000>;
+ reg = <0x00810000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1609,7 +1609,7 @@ cti0: cti@810000 {
/* CTI 1 - TPIU connections */
cti1: cti@811000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0x811000 0x1000>;
+ reg = <0x00811000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1624,7 +1624,7 @@ cti1: cti@811000 {
cti12: cti@858000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
- reg = <0x858000 0x1000>;
+ reg = <0x00858000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1639,7 +1639,7 @@ cti12: cti@858000 {
cti13: cti@859000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
- reg = <0x859000 0x1000>;
+ reg = <0x00859000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1654,7 +1654,7 @@ cti13: cti@859000 {
cti14: cti@85a000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
- reg = <0x85a000 0x1000>;
+ reg = <0x0085a000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1669,7 +1669,7 @@ cti14: cti@85a000 {
cti15: cti@85b000 {
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
"arm,primecell";
- reg = <0x85b000 0x1000>;
+ reg = <0x0085b000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1704,15 +1704,15 @@ video-encoder {
camss: camss@1b00000 {
compatible = "qcom,msm8916-camss";
- reg = <0x1b0ac00 0x200>,
- <0x1b00030 0x4>,
- <0x1b0b000 0x200>,
- <0x1b00038 0x4>,
- <0x1b08000 0x100>,
- <0x1b08400 0x100>,
- <0x1b0a000 0x500>,
- <0x1b00020 0x10>,
- <0x1b10000 0x1000>;
+ reg = <0x01b0ac00 0x200>,
+ <0x01b00030 0x4>,
+ <0x01b0b000 0x200>,
+ <0x01b00038 0x4>,
+ <0x01b08000 0x100>,
+ <0x01b08400 0x100>,
+ <0x01b0a000 0x500>,
+ <0x01b00020 0x10>,
+ <0x01b10000 0x1000>;
reg-names = "csiphy0",
"csiphy0_clk_mux",
"csiphy1",
@@ -1785,7 +1785,7 @@ cci: cci@1b0c000 {
compatible = "qcom,msm8916-cci";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x1b0c000 0x1000>;
+ reg = <0x01b0c000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
<&gcc GCC_CAMSS_CCI_AHB_CLK>,
Just like in commit 86f6d6225e5e ("arm64: dts: qcom: msm8996: Pad addresses"), pad all addresses to 8 digits to make it easier to see the correct order of the nodes. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 138 +++++++++++++------------- 1 file changed, 69 insertions(+), 69 deletions(-)