| Message ID | 20201002171112.22738-1-xypron.glpk@gmx.de |
|---|---|
| State | New |
| Headers | show |
| Series | [1/1] docs: admin-guide: fdt and initrd load in EFI stub | expand |
Hi Heinrich, Thanks for documenting this. On Fri, 2 Oct 2020 at 19:11, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > Describe how a device tree and an initial RAM disk can be passed to the EFI > Boot Stub. > > Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> > --- > Documentation/admin-guide/efi-stub.rst | 35 ++++++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/Documentation/admin-guide/efi-stub.rst b/Documentation/admin-guide/efi-stub.rst > index 833edb0d0bc4..86f50a33884c 100644 > --- a/Documentation/admin-guide/efi-stub.rst > +++ b/Documentation/admin-guide/efi-stub.rst > @@ -38,6 +38,34 @@ arch/arm/boot/zImage should be copied to the system partition, and it > may not need to be renamed. Similarly for arm64, arch/arm64/boot/Image > should be copied but not necessarily renamed. > > +Passing an initial RAM disk to the EFI Boot Stub > +------------------------------------------------ > + > +The following means sorted by decreasing priority can be used to provide an > +initial RAM disk to the EFI Boot Stub: > + > +* The firmware may provide a UEFI Load File 2 Protocol. The stub will try to > + load the RAM disk by calling the LoadFile() service of the protocol using > + a vendor device path with the vendor GUID > + 5568e427-0x68fc-4f3d-ac74-ca555231cc68. > +* Next the EFI stub will try to load the file indicated by the "initrd=" command > + line parameter. > +* The prior boot stage may pass the location of the initial RAM disk via the > + "linux,initrd-start" and "linux,initrd-end" properties of the "/chosen" node > + of the device-tree. > + On x86, the boot_params struct is used to pass the address and size of the initrd in memory. Maybe include that for completeness? > +The first two items are inhibited by the "noinitrd" command line parameter. > + Interesting. Are you saying noinitrd is ignored by the kernel itself? Looking at the code, it might only work for preventing the load of old style initrd ramdisks, whereas initramfs images are handled separately. This is something that we should probably fix one way or the other. > +Passing a device-tree to the EFI Boot Stub > +------------------------------------------ > + > +A device-tree can be passed to the EFI Boot Stub in decreasing priority using > + > +* command line option dtb= > +* a UEFI configuration table with GUID b1b621d5-f19c-41a5-830b-d9152c69aae0. > + > +The command line option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y > +and secure boot is disabled. > > Passing kernel parameters from the EFI shell > -------------------------------------------- > @@ -46,6 +74,10 @@ Arguments to the kernel can be passed after bzImage.efi, e.g.:: > > fs0:> bzImage.efi console=ttyS0 root=/dev/sda4 > > +The "noinitrd" option > +--------------------- > + > +The "noinitrd" option stops the EFI stub from loading an initial RAM disk. > > The "initrd=" option > -------------------- > @@ -98,3 +130,6 @@ CONFIGURATION TABLE. > > "dtb=" is processed in the same manner as the "initrd=" option that is > described above. > + > +This option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y and secure > +boot is disabled. > -- > 2.28.0 >
On 02.10.20 19:21, Ard Biesheuvel wrote: > Hi Heinrich, > > Thanks for documenting this. > > > On Fri, 2 Oct 2020 at 19:11, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >> >> Describe how a device tree and an initial RAM disk can be passed to the EFI >> Boot Stub. >> >> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> >> --- >> Documentation/admin-guide/efi-stub.rst | 35 ++++++++++++++++++++++++++ >> 1 file changed, 35 insertions(+) >> >> diff --git a/Documentation/admin-guide/efi-stub.rst b/Documentation/admin-guide/efi-stub.rst >> index 833edb0d0bc4..86f50a33884c 100644 >> --- a/Documentation/admin-guide/efi-stub.rst >> +++ b/Documentation/admin-guide/efi-stub.rst >> @@ -38,6 +38,34 @@ arch/arm/boot/zImage should be copied to the system partition, and it >> may not need to be renamed. Similarly for arm64, arch/arm64/boot/Image >> should be copied but not necessarily renamed. >> >> +Passing an initial RAM disk to the EFI Boot Stub >> +------------------------------------------------ >> + >> +The following means sorted by decreasing priority can be used to provide an >> +initial RAM disk to the EFI Boot Stub: >> + >> +* The firmware may provide a UEFI Load File 2 Protocol. The stub will try to >> + load the RAM disk by calling the LoadFile() service of the protocol using >> + a vendor device path with the vendor GUID >> + 5568e427-0x68fc-4f3d-ac74-ca555231cc68. >> +* Next the EFI stub will try to load the file indicated by the "initrd=" command >> + line parameter. >> +* The prior boot stage may pass the location of the initial RAM disk via the >> + "linux,initrd-start" and "linux,initrd-end" properties of the "/chosen" node >> + of the device-tree. >> + > > On x86, the boot_params struct is used to pass the address and size of > the initrd in memory. Maybe include that for completeness? Sure we should add it. But I will just wait for more review comments. > >> +The first two items are inhibited by the "noinitrd" command line parameter. >> + > > Interesting. Are you saying noinitrd is ignored by the kernel itself? > > Looking at the code, it might only work for preventing the load of old > style initrd ramdisks, whereas initramfs images are handled > separately. > > This is something that we should probably fix one way or the other. > initrd_load() seems to depend on the value and will not create /dev/ram if "noinitrd" is set. init/do_mounts_initrd.o is compiled for ARMv8. But my ARMv8 Odroid C2 boots fine via U-Boot->GRUB->EFI stub->Linux with: [ +0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.9.0-rc6-arm64+ root=UUID=.. ro earlycon=meson,0xc81004c0,115200n8 noinitrd So I assume initrd_load() is either not called or at least not needed for the FDT case. Best regards Heinrich > >> +Passing a device-tree to the EFI Boot Stub >> +------------------------------------------ >> + >> +A device-tree can be passed to the EFI Boot Stub in decreasing priority using >> + >> +* command line option dtb= >> +* a UEFI configuration table with GUID b1b621d5-f19c-41a5-830b-d9152c69aae0. >> + >> +The command line option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y >> +and secure boot is disabled. >> >> Passing kernel parameters from the EFI shell >> -------------------------------------------- >> @@ -46,6 +74,10 @@ Arguments to the kernel can be passed after bzImage.efi, e.g.:: >> >> fs0:> bzImage.efi console=ttyS0 root=/dev/sda4 >> >> +The "noinitrd" option >> +--------------------- >> + >> +The "noinitrd" option stops the EFI stub from loading an initial RAM disk. >> >> The "initrd=" option >> -------------------- >> @@ -98,3 +130,6 @@ CONFIGURATION TABLE. >> >> "dtb=" is processed in the same manner as the "initrd=" option that is >> described above. >> + >> +This option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y and secure >> +boot is disabled. >> -- >> 2.28.0 >>
On 10/2/20 7:21 PM, Ard Biesheuvel wrote: > Hi Heinrich, > > Thanks for documenting this. > > > On Fri, 2 Oct 2020 at 19:11, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >> >> Describe how a device tree and an initial RAM disk can be passed to the EFI >> Boot Stub. >> >> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> >> --- >> Documentation/admin-guide/efi-stub.rst | 35 ++++++++++++++++++++++++++ >> 1 file changed, 35 insertions(+) >> >> diff --git a/Documentation/admin-guide/efi-stub.rst b/Documentation/admin-guide/efi-stub.rst >> index 833edb0d0bc4..86f50a33884c 100644 >> --- a/Documentation/admin-guide/efi-stub.rst >> +++ b/Documentation/admin-guide/efi-stub.rst >> @@ -38,6 +38,34 @@ arch/arm/boot/zImage should be copied to the system partition, and it >> may not need to be renamed. Similarly for arm64, arch/arm64/boot/Image >> should be copied but not necessarily renamed. >> >> +Passing an initial RAM disk to the EFI Boot Stub >> +------------------------------------------------ >> + >> +The following means sorted by decreasing priority can be used to provide an >> +initial RAM disk to the EFI Boot Stub: >> + >> +* The firmware may provide a UEFI Load File 2 Protocol. The stub will try to >> + load the RAM disk by calling the LoadFile() service of the protocol using >> + a vendor device path with the vendor GUID >> + 5568e427-0x68fc-4f3d-ac74-ca555231cc68. >> +* Next the EFI stub will try to load the file indicated by the "initrd=" command >> + line parameter. >> +* The prior boot stage may pass the location of the initial RAM disk via the >> + "linux,initrd-start" and "linux,initrd-end" properties of the "/chosen" node >> + of the device-tree. >> + > > On x86, the boot_params struct is used to pass the address and size of > the initrd in memory. Maybe include that for completeness? On x86 boot_params is set in function efi_pe_entry() after loading the file indicated by the initrd= command line. boot_params is not accessible by a caller of the EFI stub but is a structure used at the interface between EFI stub and main kernel. This interface is not in the scope of the admin-guide. The main Linux entry point is already described in Documentation/x86/boot.rst and ./Documentation/x86/zero-page.rst. We can add Sphinx style documentation for function efi_pe_entry() mentioning that it fills in boot_params. drivers/firmware/efi/libstub/x86-stub.c then can be added to Documentation/driver-api/firmware/efi/index.rst in an x86 chapter. But these will be separate patches. Best regards Heinrich > >> +The first two items are inhibited by the "noinitrd" command line parameter. >> + > > Interesting. Are you saying noinitrd is ignored by the kernel itself? > > Looking at the code, it might only work for preventing the load of old > style initrd ramdisks, whereas initramfs images are handled > separately. > > This is something that we should probably fix one way or the other. > > >> +Passing a device-tree to the EFI Boot Stub >> +------------------------------------------ >> + >> +A device-tree can be passed to the EFI Boot Stub in decreasing priority using >> + >> +* command line option dtb= >> +* a UEFI configuration table with GUID b1b621d5-f19c-41a5-830b-d9152c69aae0. >> + >> +The command line option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y >> +and secure boot is disabled. >> >> Passing kernel parameters from the EFI shell >> -------------------------------------------- >> @@ -46,6 +74,10 @@ Arguments to the kernel can be passed after bzImage.efi, e.g.:: >> >> fs0:> bzImage.efi console=ttyS0 root=/dev/sda4 >> >> +The "noinitrd" option >> +--------------------- >> + >> +The "noinitrd" option stops the EFI stub from loading an initial RAM disk. >> >> The "initrd=" option >> -------------------- >> @@ -98,3 +130,6 @@ CONFIGURATION TABLE. >> >> "dtb=" is processed in the same manner as the "initrd=" option that is >> described above. >> + >> +This option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y and secure >> +boot is disabled. >> -- >> 2.28.0 >>
On Fri, 2 Oct 2020 at 21:14, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > On 10/2/20 7:21 PM, Ard Biesheuvel wrote: > > Hi Heinrich, > > > > Thanks for documenting this. > > > > > > On Fri, 2 Oct 2020 at 19:11, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > >> > >> Describe how a device tree and an initial RAM disk can be passed to the EFI > >> Boot Stub. > >> > >> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> > >> --- > >> Documentation/admin-guide/efi-stub.rst | 35 ++++++++++++++++++++++++++ > >> 1 file changed, 35 insertions(+) > >> > >> diff --git a/Documentation/admin-guide/efi-stub.rst b/Documentation/admin-guide/efi-stub.rst > >> index 833edb0d0bc4..86f50a33884c 100644 > >> --- a/Documentation/admin-guide/efi-stub.rst > >> +++ b/Documentation/admin-guide/efi-stub.rst > >> @@ -38,6 +38,34 @@ arch/arm/boot/zImage should be copied to the system partition, and it > >> may not need to be renamed. Similarly for arm64, arch/arm64/boot/Image > >> should be copied but not necessarily renamed. > >> > >> +Passing an initial RAM disk to the EFI Boot Stub > >> +------------------------------------------------ > >> + > >> +The following means sorted by decreasing priority can be used to provide an > >> +initial RAM disk to the EFI Boot Stub: > >> + > >> +* The firmware may provide a UEFI Load File 2 Protocol. The stub will try to > >> + load the RAM disk by calling the LoadFile() service of the protocol using > >> + a vendor device path with the vendor GUID > >> + 5568e427-0x68fc-4f3d-ac74-ca555231cc68. > >> +* Next the EFI stub will try to load the file indicated by the "initrd=" command > >> + line parameter. > >> +* The prior boot stage may pass the location of the initial RAM disk via the > >> + "linux,initrd-start" and "linux,initrd-end" properties of the "/chosen" node > >> + of the device-tree. > >> + > > > > On x86, the boot_params struct is used to pass the address and size of > > the initrd in memory. Maybe include that for completeness? > > On x86 boot_params is set in function efi_pe_entry() after loading the > file indicated by the initrd= command line. > > boot_params is not accessible by a caller of the EFI stub but is a > structure used at the interface between EFI stub and main kernel. This > interface is not in the scope of the admin-guide. > I don't see the difference between dt for arm and boot_params for x86. Both can be provided by the bootloader, and will be created from scratch by the efi stub if not. They both carry the command line and address and size of the initrd, and the efi stub will load the initrd and update this Information, or pass it on unmodified if the bootloader already loaded the initrd into memory. > The main Linux entry point is already described in > Documentation/x86/boot.rst and ./Documentation/x86/zero-page.rst. > > We can add Sphinx style documentation for function efi_pe_entry() > mentioning that it fills in boot_params. > drivers/firmware/efi/libstub/x86-stub.c then can be added to > Documentation/driver-api/firmware/efi/index.rst in an x86 chapter. But > these will be separate patches. > > Best regards > > Heinrich > > > > >> +The first two items are inhibited by the "noinitrd" command line parameter. > >> + > > > > Interesting. Are you saying noinitrd is ignored by the kernel itself? > > > > Looking at the code, it might only work for preventing the load of old > > style initrd ramdisks, whereas initramfs images are handled > > separately. > > > > This is something that we should probably fix one way or the other. > > > > > >> +Passing a device-tree to the EFI Boot Stub > >> +------------------------------------------ > >> + > >> +A device-tree can be passed to the EFI Boot Stub in decreasing priority using > >> + > >> +* command line option dtb= > >> +* a UEFI configuration table with GUID b1b621d5-f19c-41a5-830b-d9152c69aae0. > >> + > >> +The command line option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y > >> +and secure boot is disabled. > >> > >> Passing kernel parameters from the EFI shell > >> -------------------------------------------- > >> @@ -46,6 +74,10 @@ Arguments to the kernel can be passed after bzImage.efi, e.g.:: > >> > >> fs0:> bzImage.efi console=ttyS0 root=/dev/sda4 > >> > >> +The "noinitrd" option > >> +--------------------- > >> + > >> +The "noinitrd" option stops the EFI stub from loading an initial RAM disk. > >> > >> The "initrd=" option > >> -------------------- > >> @@ -98,3 +130,6 @@ CONFIGURATION TABLE. > >> > >> "dtb=" is processed in the same manner as the "initrd=" option that is > >> described above. > >> + > >> +This option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y and secure > >> +boot is disabled. > >> -- > >> 2.28.0 > >> >
On 10/2/20 9:21 PM, Ard Biesheuvel wrote: > On Fri, 2 Oct 2020 at 21:14, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >> >> On 10/2/20 7:21 PM, Ard Biesheuvel wrote: >>> Hi Heinrich, >>> >>> Thanks for documenting this. >>> >>> >>> On Fri, 2 Oct 2020 at 19:11, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>>> >>>> Describe how a device tree and an initial RAM disk can be passed to the EFI >>>> Boot Stub. >>>> >>>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> >>>> --- >>>> Documentation/admin-guide/efi-stub.rst | 35 ++++++++++++++++++++++++++ >>>> 1 file changed, 35 insertions(+) >>>> >>>> diff --git a/Documentation/admin-guide/efi-stub.rst b/Documentation/admin-guide/efi-stub.rst >>>> index 833edb0d0bc4..86f50a33884c 100644 >>>> --- a/Documentation/admin-guide/efi-stub.rst >>>> +++ b/Documentation/admin-guide/efi-stub.rst >>>> @@ -38,6 +38,34 @@ arch/arm/boot/zImage should be copied to the system partition, and it >>>> may not need to be renamed. Similarly for arm64, arch/arm64/boot/Image >>>> should be copied but not necessarily renamed. >>>> >>>> +Passing an initial RAM disk to the EFI Boot Stub >>>> +------------------------------------------------ >>>> + >>>> +The following means sorted by decreasing priority can be used to provide an >>>> +initial RAM disk to the EFI Boot Stub: >>>> + >>>> +* The firmware may provide a UEFI Load File 2 Protocol. The stub will try to >>>> + load the RAM disk by calling the LoadFile() service of the protocol using >>>> + a vendor device path with the vendor GUID >>>> + 5568e427-0x68fc-4f3d-ac74-ca555231cc68. >>>> +* Next the EFI stub will try to load the file indicated by the "initrd=" command >>>> + line parameter. >>>> +* The prior boot stage may pass the location of the initial RAM disk via the >>>> + "linux,initrd-start" and "linux,initrd-end" properties of the "/chosen" node >>>> + of the device-tree. >>>> + >>> >>> On x86, the boot_params struct is used to pass the address and size of >>> the initrd in memory. Maybe include that for completeness? >> >> On x86 boot_params is set in function efi_pe_entry() after loading the >> file indicated by the initrd= command line. >> >> boot_params is not accessible by a caller of the EFI stub but is a >> structure used at the interface between EFI stub and main kernel. This >> interface is not in the scope of the admin-guide. >> > > I don't see the difference between dt for arm and boot_params for > x86. Both can be provided by the bootloader, and will be created from > scratch by the efi stub if not. They both carry the command line and > address and size of the initrd, and the efi stub will load the initrd > and update this Information, or pass it on unmodified if the > bootloader already loaded the initrd into memory. "The Linux kernel user’s and administrator’s guide" is not targeted for developers. All I have described in this patch are interfaces between Linux and the prior boot stage when using the EFI stub. It does not cover how the EFI stub communicates with main Linux. I may already have put too much technical detail here considering the audience. To my knowledge boot_params is not an inbound interface parameter of the EFI stub. Is it of interests for administrators and users to know that the EFI stub calls the legacy entry point of Linux? If yes, we should point to the documentation of the legacy entry point for all architectures: https://www.kernel.org/doc/html/latest/x86/boot.html#bit-boot-protocol https://www.kernel.org/doc/html/latest/x86/boot.html#id1 https://www.kernel.org/doc/html/latest/arm/booting.html https://www.kernel.org/doc/html/latest/arm64/booting.html I could not find an appropriate chapter for RISC-V in https://www.kernel.org/doc/html/latest/riscv/index.html. As the interface between the EFI stub and main Linux is not exposed to the outside world and may rightfully change without notice I suggest to not mention it in the admin guide. Best regards Heinrich > > > >> The main Linux entry point is already described in >> Documentation/x86/boot.rst and ./Documentation/x86/zero-page.rst. >> >> We can add Sphinx style documentation for function efi_pe_entry() >> mentioning that it fills in boot_params. >> drivers/firmware/efi/libstub/x86-stub.c then can be added to >> Documentation/driver-api/firmware/efi/index.rst in an x86 chapter. But >> these will be separate patches. >> >> Best regards >> >> Heinrich >> >>> >>>> +The first two items are inhibited by the "noinitrd" command line parameter. >>>> + >>> >>> Interesting. Are you saying noinitrd is ignored by the kernel itself? >>> >>> Looking at the code, it might only work for preventing the load of old >>> style initrd ramdisks, whereas initramfs images are handled >>> separately. >>> >>> This is something that we should probably fix one way or the other. >>> >>> >>>> +Passing a device-tree to the EFI Boot Stub >>>> +------------------------------------------ >>>> + >>>> +A device-tree can be passed to the EFI Boot Stub in decreasing priority using >>>> + >>>> +* command line option dtb= >>>> +* a UEFI configuration table with GUID b1b621d5-f19c-41a5-830b-d9152c69aae0. >>>> + >>>> +The command line option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y >>>> +and secure boot is disabled. >>>> >>>> Passing kernel parameters from the EFI shell >>>> -------------------------------------------- >>>> @@ -46,6 +74,10 @@ Arguments to the kernel can be passed after bzImage.efi, e.g.:: >>>> >>>> fs0:> bzImage.efi console=ttyS0 root=/dev/sda4 >>>> >>>> +The "noinitrd" option >>>> +--------------------- >>>> + >>>> +The "noinitrd" option stops the EFI stub from loading an initial RAM disk. >>>> >>>> The "initrd=" option >>>> -------------------- >>>> @@ -98,3 +130,6 @@ CONFIGURATION TABLE. >>>> >>>> "dtb=" is processed in the same manner as the "initrd=" option that is >>>> described above. >>>> + >>>> +This option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y and secure >>>> +boot is disabled. >>>> -- >>>> 2.28.0 >>>> >>
On Fri, Oct 2, 2020 at 1:04 PM Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > On 10/2/20 9:21 PM, Ard Biesheuvel wrote: > > On Fri, 2 Oct 2020 at 21:14, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > >> > >> On 10/2/20 7:21 PM, Ard Biesheuvel wrote: > >>> Hi Heinrich, > >>> > >>> Thanks for documenting this. > >>> > >>> > >>> On Fri, 2 Oct 2020 at 19:11, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > >>>> > >>>> Describe how a device tree and an initial RAM disk can be passed to the EFI > >>>> Boot Stub. > >>>> > >>>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> > >>>> --- > >>>> Documentation/admin-guide/efi-stub.rst | 35 ++++++++++++++++++++++++++ > >>>> 1 file changed, 35 insertions(+) > >>>> > >>>> diff --git a/Documentation/admin-guide/efi-stub.rst b/Documentation/admin-guide/efi-stub.rst > >>>> index 833edb0d0bc4..86f50a33884c 100644 > >>>> --- a/Documentation/admin-guide/efi-stub.rst > >>>> +++ b/Documentation/admin-guide/efi-stub.rst > >>>> @@ -38,6 +38,34 @@ arch/arm/boot/zImage should be copied to the system partition, and it > >>>> may not need to be renamed. Similarly for arm64, arch/arm64/boot/Image > >>>> should be copied but not necessarily renamed. > >>>> > >>>> +Passing an initial RAM disk to the EFI Boot Stub > >>>> +------------------------------------------------ > >>>> + > >>>> +The following means sorted by decreasing priority can be used to provide an > >>>> +initial RAM disk to the EFI Boot Stub: > >>>> + > >>>> +* The firmware may provide a UEFI Load File 2 Protocol. The stub will try to > >>>> + load the RAM disk by calling the LoadFile() service of the protocol using > >>>> + a vendor device path with the vendor GUID > >>>> + 5568e427-0x68fc-4f3d-ac74-ca555231cc68. > >>>> +* Next the EFI stub will try to load the file indicated by the "initrd=" command > >>>> + line parameter. This is only applicable if EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER is enabled. Should we specify that as well? > >>>> +* The prior boot stage may pass the location of the initial RAM disk via the > >>>> + "linux,initrd-start" and "linux,initrd-end" properties of the "/chosen" node > >>>> + of the device-tree. > >>>> + > >>> > >>> On x86, the boot_params struct is used to pass the address and size of > >>> the initrd in memory. Maybe include that for completeness? > >> > >> On x86 boot_params is set in function efi_pe_entry() after loading the > >> file indicated by the initrd= command line. > >> > >> boot_params is not accessible by a caller of the EFI stub but is a > >> structure used at the interface between EFI stub and main kernel. This > >> interface is not in the scope of the admin-guide. > >> > > > > I don't see the difference between dt for arm and boot_params for > > x86. Both can be provided by the bootloader, and will be created from > > scratch by the efi stub if not. They both carry the command line and > > address and size of the initrd, and the efi stub will load the initrd > > and update this Information, or pass it on unmodified if the > > bootloader already loaded the initrd into memory. > > "The Linux kernel user’s and administrator’s guide" is not targeted for > developers. > > All I have described in this patch are interfaces between Linux and the > prior boot stage when using the EFI stub. It does not cover how the EFI > stub communicates with main Linux. > > I may already have put too much technical detail here considering the > audience. > > To my knowledge boot_params is not an inbound interface parameter of the > EFI stub. > > Is it of interests for administrators and users to know that the EFI > stub calls the legacy entry point of Linux? If yes, we should point to > the documentation of the legacy entry point for all architectures: > > https://www.kernel.org/doc/html/latest/x86/boot.html#bit-boot-protocol > https://www.kernel.org/doc/html/latest/x86/boot.html#id1 > https://www.kernel.org/doc/html/latest/arm/booting.html > https://www.kernel.org/doc/html/latest/arm64/booting.html > > I could not find an appropriate chapter for RISC-V in > https://www.kernel.org/doc/html/latest/riscv/index.html. > Unfortunately, there is no booting document for RISC-V yet. It has been discussed many times but no patch yet. If you want to take a stab at it, that would be great. > As the interface between the EFI stub and main Linux is not exposed to > the outside world and may rightfully change without notice I suggest to > not mention it in the admin guide. > > Best regards > > Heinrich > > > > > > > > >> The main Linux entry point is already described in > >> Documentation/x86/boot.rst and ./Documentation/x86/zero-page.rst. > >> > >> We can add Sphinx style documentation for function efi_pe_entry() > >> mentioning that it fills in boot_params. > >> drivers/firmware/efi/libstub/x86-stub.c then can be added to > >> Documentation/driver-api/firmware/efi/index.rst in an x86 chapter. But > >> these will be separate patches. > >> > >> Best regards > >> > >> Heinrich > >> > >>> > >>>> +The first two items are inhibited by the "noinitrd" command line parameter. > >>>> + > >>> > >>> Interesting. Are you saying noinitrd is ignored by the kernel itself? > >>> > >>> Looking at the code, it might only work for preventing the load of old > >>> style initrd ramdisks, whereas initramfs images are handled > >>> separately. > >>> > >>> This is something that we should probably fix one way or the other. > >>> > >>> > >>>> +Passing a device-tree to the EFI Boot Stub > >>>> +------------------------------------------ > >>>> + > >>>> +A device-tree can be passed to the EFI Boot Stub in decreasing priority using > >>>> + > >>>> +* command line option dtb= > >>>> +* a UEFI configuration table with GUID b1b621d5-f19c-41a5-830b-d9152c69aae0. > >>>> + > >>>> +The command line option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y > >>>> +and secure boot is disabled. > >>>> > >>>> Passing kernel parameters from the EFI shell > >>>> -------------------------------------------- > >>>> @@ -46,6 +74,10 @@ Arguments to the kernel can be passed after bzImage.efi, e.g.:: > >>>> > >>>> fs0:> bzImage.efi console=ttyS0 root=/dev/sda4 > >>>> > >>>> +The "noinitrd" option > >>>> +--------------------- > >>>> + > >>>> +The "noinitrd" option stops the EFI stub from loading an initial RAM disk. > >>>> > >>>> The "initrd=" option > >>>> -------------------- > >>>> @@ -98,3 +130,6 @@ CONFIGURATION TABLE. > >>>> > >>>> "dtb=" is processed in the same manner as the "initrd=" option that is > >>>> described above. > >>>> + > >>>> +This option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y and secure > >>>> +boot is disabled. > >>>> -- > >>>> 2.28.0 > >>>> > >> > -- Regards, Atish
diff --git a/Documentation/admin-guide/efi-stub.rst b/Documentation/admin-guide/efi-stub.rst index 833edb0d0bc4..86f50a33884c 100644 --- a/Documentation/admin-guide/efi-stub.rst +++ b/Documentation/admin-guide/efi-stub.rst @@ -38,6 +38,34 @@ arch/arm/boot/zImage should be copied to the system partition, and it may not need to be renamed. Similarly for arm64, arch/arm64/boot/Image should be copied but not necessarily renamed. +Passing an initial RAM disk to the EFI Boot Stub +------------------------------------------------ + +The following means sorted by decreasing priority can be used to provide an +initial RAM disk to the EFI Boot Stub: + +* The firmware may provide a UEFI Load File 2 Protocol. The stub will try to + load the RAM disk by calling the LoadFile() service of the protocol using + a vendor device path with the vendor GUID + 5568e427-0x68fc-4f3d-ac74-ca555231cc68. +* Next the EFI stub will try to load the file indicated by the "initrd=" command + line parameter. +* The prior boot stage may pass the location of the initial RAM disk via the + "linux,initrd-start" and "linux,initrd-end" properties of the "/chosen" node + of the device-tree. + +The first two items are inhibited by the "noinitrd" command line parameter. + +Passing a device-tree to the EFI Boot Stub +------------------------------------------ + +A device-tree can be passed to the EFI Boot Stub in decreasing priority using + +* command line option dtb= +* a UEFI configuration table with GUID b1b621d5-f19c-41a5-830b-d9152c69aae0. + +The command line option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y +and secure boot is disabled. Passing kernel parameters from the EFI shell -------------------------------------------- @@ -46,6 +74,10 @@ Arguments to the kernel can be passed after bzImage.efi, e.g.:: fs0:> bzImage.efi console=ttyS0 root=/dev/sda4 +The "noinitrd" option +--------------------- + +The "noinitrd" option stops the EFI stub from loading an initial RAM disk. The "initrd=" option -------------------- @@ -98,3 +130,6 @@ CONFIGURATION TABLE. "dtb=" is processed in the same manner as the "initrd=" option that is described above. + +This option is only available if CONFIG_EFI_ARMSTUB_DTB_LOADER=y and secure +boot is disabled.
Describe how a device tree and an initial RAM disk can be passed to the EFI Boot Stub. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> --- Documentation/admin-guide/efi-stub.rst | 35 ++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) -- 2.28.0