| Message ID | 20200830194841.60766-1-freifunk@adrianschmutzler.de |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: dra7xx: replace status value "ok" by "okay" | expand |
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index b3a0206ebd6c..1809f97d491d 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -582,13 +582,13 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&ldoln_reg>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo4_reg>; port { @@ -599,7 +599,7 @@ }; &pcie1_rc { - status = "ok"; + status = "okay"; gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index ce5bf1d92eab..beef63e8a005 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -120,7 +120,7 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&ldoln_reg>; @@ -148,7 +148,7 @@ }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo4_reg>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a952d934fcf2..bda6f7eeef4f 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -565,7 +565,7 @@ }; &dcan1 { - status = "ok"; + status = "okay"; pinctrl-names = "default", "sleep", "active"; pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 9273a7d6fa29..7506e415b08f 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -467,7 +467,7 @@ }; &dcan1 { - status = "ok"; + status = "okay"; pinctrl-names = "default", "sleep", "active"; pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; @@ -536,11 +536,11 @@ }; &dss { - status = "ok"; + status = "okay"; }; &hdmi { - status = "ok"; + status = "okay"; port { hdmi_out: endpoint { diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 803981cc762e..81590ef36937 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -522,12 +522,12 @@ }; &dss { - status = "ok"; + status = "okay"; vdda_video-supply = <&ldo5_reg>; }; &hdmi { - status = "ok"; + status = "okay"; vdda-supply = <&ldo1_reg>;
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> --- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 6 +++--- arch/arm/boot/dts/am57xx-sbc-am57x.dts | 4 ++-- arch/arm/boot/dts/dra7-evm.dts | 2 +- arch/arm/boot/dts/dra72-evm-common.dtsi | 6 +++--- arch/arm/boot/dts/dra76-evm.dts | 4 ++-- 5 files changed, 11 insertions(+), 11 deletions(-)