diff mbox

[v4,6/7] ARM: dts: dra7: Add USB related nodes

Message ID 536A1F37.4010202@ti.com
State New
Headers show

Commit Message

Roger Quadros May 7, 2014, 11:55 a.m. UTC 
Add nodes for the Super Speed USB controllers, omap-control-usb,
USB2 PHY and USB3 PHY devices.

Use IRQ crossbar for interrupts.

Remove ocp2scp1 address space from hwmod data as it is
now provided via device tree.

CC: Benoît Cousson <bcousson@baylibre.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi               | 148 ++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c |  10 --
 2 files changed, 148 insertions(+), 10 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index cec826f..8bc48bd 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -798,6 +798,154 @@ 
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
+
+		omap_control_usb2phy1: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb3phy1: control-phy@4a002370 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002370 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb2phy2: control-phy@0x4a002e74 {
+			compatible = "ti,control-phy-usb2-dra7";
+			reg = <0x4a002e74 0x4>;
+			reg-names = "power";
+		};
+
+		/* OCP2SCP1 */
+		ocp2scp@4a080000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x4a080000 0x20>;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy1: phy@4a084000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a084000 0x400>;
+				ctrl-module = <&omap_control_usb2phy1>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb2_phy2: phy@4a085000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a085000 0x400>;
+				ctrl-module = <&omap_control_usb2phy2>;
+				clocks = <&usb_phy2_always_on_clk32k>,
+					 <&usb_otg_ss2_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb3_phy1: phy@4a084400 {
+				compatible = "ti,omap-usb3";
+				reg = <0x4a084400 0x80>,
+				      <0x4a084800 0x64>,
+				      <0x4a084c00 0x40>;
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_usb3phy1>;
+				clocks = <&usb_phy3_always_on_clk32k>,
+					 <&sys_clkin1>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"sysclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		omap_dwc3_1@48880000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x48880000 0x10000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb1: usb@48890000 {
+				compatible = "snps,dwc3";
+				reg = <0x48890000 0x17000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>, <&usb3_phy1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				maximum-speed = "super-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		omap_dwc3_2@488c0000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss2";
+			reg = <0x488c0000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb2: usb@488d0000 {
+				compatible = "snps,dwc3";
+				reg = <0x488d0000 0x17000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		omap_dwc3_3@48900000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss3";
+			reg = <0x48900000 0x10000>;
+			interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb3: usb@48910000 {
+				compatible = "snps,dwc3";
+				reg = <0x48910000 0x17000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		omap_dwc3_4@48940000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss4";
+			reg = <0x48940000 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb4: usb@48950000 {
+				compatible = "snps,dwc3";
+				reg = <0x48950000 0x17000>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
 	};
 
 	crossbar_mpu: crossbar@4a020000 {
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 067d322..d6f9709 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2330,21 +2330,11 @@  static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = {
-	{
-		.pa_start	= 0x4a080000,
-		.pa_end		= 0x4a08001f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_cfg -> ocp2scp1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
 	.master		= &dra7xx_l4_cfg_hwmod,
 	.slave		= &dra7xx_ocp2scp1_hwmod,
 	.clk		= "l4_root_clk_div",
-	.addr		= dra7xx_ocp2scp1_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };