@@ -33,72 +33,75 @@ do { printf("usb-serial: " fmt , ## __VA_ARGS__); } while (0)
#define RECV_BUF (512 - (2 * 8))
/* Commands */
-#define FTDI_RESET 0
-#define FTDI_SET_MDM_CTRL 1
-#define FTDI_SET_FLOW_CTRL 2
-#define FTDI_SET_BAUD 3
-#define FTDI_SET_DATA 4
-#define FTDI_GET_MDM_ST 5
-#define FTDI_SET_EVENT_CHR 6
-#define FTDI_SET_ERROR_CHR 7
-#define FTDI_SET_LATENCY 9
-#define FTDI_GET_LATENCY 10
+#define FTDI_RESET 0
+#define FTDI_SET_MDM_CTRL 1
+#define FTDI_SET_FLOW_CTRL 2
+#define FTDI_SET_BAUD 3
+#define FTDI_SET_DATA 4
+#define FTDI_GET_MDM_ST 5
+#define FTDI_SET_EVENT_CHR 6
+#define FTDI_SET_ERROR_CHR 7
+#define FTDI_SET_LATENCY 9
+#define FTDI_GET_LATENCY 10
-#define DeviceOutVendor ((USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
-#define DeviceInVendor ((USB_DIR_IN |USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
+#define DeviceOutVendor \
+ ((USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE) << 8)
+#define DeviceInVendor \
+ ((USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE) << 8)
/* RESET */
-#define FTDI_RESET_SIO 0
-#define FTDI_RESET_RX 1
-#define FTDI_RESET_TX 2
+#define FTDI_RESET_SIO 0
+#define FTDI_RESET_RX 1
+#define FTDI_RESET_TX 2
/* SET_MDM_CTRL */
-#define FTDI_DTR 1
-#define FTDI_SET_DTR (FTDI_DTR << 8)
-#define FTDI_RTS 2
-#define FTDI_SET_RTS (FTDI_RTS << 8)
+#define FTDI_DTR 1
+#define FTDI_SET_DTR (FTDI_DTR << 8)
+#define FTDI_RTS 2
+#define FTDI_SET_RTS (FTDI_RTS << 8)
/* SET_FLOW_CTRL */
-#define FTDI_RTS_CTS_HS 1
-#define FTDI_DTR_DSR_HS 2
-#define FTDI_XON_XOFF_HS 4
+#define FTDI_RTS_CTS_HS 1
+#define FTDI_DTR_DSR_HS 2
+#define FTDI_XON_XOFF_HS 4
/* SET_DATA */
-#define FTDI_PARITY (0x7 << 8)
-#define FTDI_ODD (0x1 << 8)
-#define FTDI_EVEN (0x2 << 8)
-#define FTDI_MARK (0x3 << 8)
-#define FTDI_SPACE (0x4 << 8)
+#define FTDI_PARITY (0x7 << 8)
+#define FTDI_ODD (0x1 << 8)
+#define FTDI_EVEN (0x2 << 8)
+#define FTDI_MARK (0x3 << 8)
+#define FTDI_SPACE (0x4 << 8)
-#define FTDI_STOP (0x3 << 11)
-#define FTDI_STOP1 (0x0 << 11)
-#define FTDI_STOP15 (0x1 << 11)
-#define FTDI_STOP2 (0x2 << 11)
+#define FTDI_STOP (0x3 << 11)
+#define FTDI_STOP1 (0x0 << 11)
+#define FTDI_STOP15 (0x1 << 11)
+#define FTDI_STOP2 (0x2 << 11)
/* GET_MDM_ST */
/* TODO: should be sent every 40ms */
-#define FTDI_CTS (1<<4) // CTS line status
-#define FTDI_DSR (1<<5) // DSR line status
-#define FTDI_RI (1<<6) // RI line status
-#define FTDI_RLSD (1<<7) // Receive Line Signal Detect
+#define FTDI_CTS (1 << 4) /* CTS line status */
+#define FTDI_DSR (1 << 5) /* DSR line status */
+#define FTDI_RI (1 << 6) /* RI line status */
+#define FTDI_RLSD (1 << 7) /* Receive Line Signal Detect */
/* Status */
-#define FTDI_DR (1<<0) // Data Ready
-#define FTDI_OE (1<<1) // Overrun Err
-#define FTDI_PE (1<<2) // Parity Err
-#define FTDI_FE (1<<3) // Framing Err
-#define FTDI_BI (1<<4) // Break Interrupt
-#define FTDI_THRE (1<<5) // Transmitter Holding Register
-#define FTDI_TEMT (1<<6) // Transmitter Empty
-#define FTDI_FIFO (1<<7) // Error in FIFO
+#define FTDI_DR (1 << 0) /* Data Ready */
+#define FTDI_OE (1 << 1) /* Overrun Err */
+#define FTDI_PE (1 << 2) /* Parity Err */
+#define FTDI_FE (1 << 3) /* Framing Err */
+#define FTDI_BI (1 << 4) /* Break Interrupt */
+#define FTDI_THRE (1 << 5) /* Transmitter Holding Register */
+#define FTDI_TEMT (1 << 6) /* Transmitter Empty */
+#define FTDI_FIFO (1 << 7) /* Error in FIFO */
struct USBSerialState {
USBDevice dev;
+
USBEndpoint *intr;
uint8_t recv_buf[RECV_BUF];
uint16_t recv_ptr;
@@ -216,29 +219,34 @@ static uint8_t usb_get_modem_lines(USBSerialState *s)
if (qemu_chr_fe_ioctl(&s->cs,
CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP) {
- return FTDI_CTS|FTDI_DSR|FTDI_RLSD;
+ return FTDI_CTS | FTDI_DSR | FTDI_RLSD;
}
ret = 0;
- if (flags & CHR_TIOCM_CTS)
+ if (flags & CHR_TIOCM_CTS) {
ret |= FTDI_CTS;
- if (flags & CHR_TIOCM_DSR)
+ }
+ if (flags & CHR_TIOCM_DSR) {
ret |= FTDI_DSR;
- if (flags & CHR_TIOCM_RI)
+ }
+ if (flags & CHR_TIOCM_RI) {
ret |= FTDI_RI;
- if (flags & CHR_TIOCM_CAR)
+ }
+ if (flags & CHR_TIOCM_CAR) {
ret |= FTDI_RLSD;
+ }
return ret;
}
static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
- int request, int value, int index, int length, uint8_t *data)
+ int request, int value, int index,
+ int length, uint8_t *data)
{
USBSerialState *s = (USBSerialState *)dev;
int ret;
- DPRINTF("got control %x, value %x\n",request, value);
+ DPRINTF("got control %x, value %x\n", request, value);
ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
if (ret >= 0) {
return;
@@ -248,7 +256,7 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
break;
- /* Class specific requests. */
+ /* Class specific requests. */
case DeviceOutVendor | FTDI_RESET:
switch (value) {
case FTDI_RESET_SIO:
@@ -269,16 +277,18 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
static int flags;
qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_GET_TIOCM, &flags);
if (value & FTDI_SET_RTS) {
- if (value & FTDI_RTS)
+ if (value & FTDI_RTS) {
flags |= CHR_TIOCM_RTS;
- else
+ } else {
flags &= ~CHR_TIOCM_RTS;
+ }
}
if (value & FTDI_SET_DTR) {
- if (value & FTDI_DTR)
+ if (value & FTDI_DTR) {
flags |= CHR_TIOCM_DTR;
- else
+ } else {
flags &= ~CHR_TIOCM_DTR;
+ }
}
qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_TIOCM, &flags);
break;
@@ -293,10 +303,12 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
int divisor = value & 0x3fff;
/* chip special cases */
- if (divisor == 1 && subdivisor8 == 0)
+ if (divisor == 1 && subdivisor8 == 0) {
subdivisor8 = 4;
- if (divisor == 0 && subdivisor8 == 0)
+ }
+ if (divisor == 0 && subdivisor8 == 0) {
divisor = 1;
+ }
s->params.speed = (48000000 / 2) / (8 * divisor + subdivisor8);
qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
@@ -304,30 +316,32 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
}
case DeviceOutVendor | FTDI_SET_DATA:
switch (value & FTDI_PARITY) {
- case 0:
- s->params.parity = 'N';
- break;
- case FTDI_ODD:
- s->params.parity = 'O';
- break;
- case FTDI_EVEN:
- s->params.parity = 'E';
- break;
- default:
- DPRINTF("unsupported parity %d\n", value & FTDI_PARITY);
- goto fail;
+ case 0:
+ s->params.parity = 'N';
+ break;
+ case FTDI_ODD:
+ s->params.parity = 'O';
+ break;
+ case FTDI_EVEN:
+ s->params.parity = 'E';
+ break;
+ default:
+ DPRINTF("unsupported parity %d\n", value & FTDI_PARITY);
+ goto fail;
}
+
switch (value & FTDI_STOP) {
- case FTDI_STOP1:
- s->params.stop_bits = 1;
- break;
- case FTDI_STOP2:
- s->params.stop_bits = 2;
- break;
- default:
- DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP);
- goto fail;
+ case FTDI_STOP1:
+ s->params.stop_bits = 1;
+ break;
+ case FTDI_STOP2:
+ s->params.stop_bits = 2;
+ break;
+ default:
+ DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP);
+ goto fail;
}
+
qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
/* TODO: TX ON/OFF */
break;
@@ -423,20 +437,24 @@ static void usb_serial_handle_data(USBDevice *dev, USBPacket *p)
switch (p->pid) {
case USB_TOKEN_OUT:
- if (devep != 2)
+ if (devep != 2) {
goto fail;
+ }
for (i = 0; i < p->iov.niov; i++) {
iov = p->iov.iov + i;
- /* XXX this blocks entire thread. Rewrite to use
- * qemu_chr_fe_write and background I/O callbacks */
+ /*
+ * XXX this blocks entire thread. Rewrite to use
+ * qemu_chr_fe_write and background I/O callbacks
+ */
qemu_chr_fe_write_all(&s->cs, iov->iov_base, iov->iov_len);
}
p->actual_length = p->iov.size;
break;
case USB_TOKEN_IN:
- if (devep != 1)
+ if (devep != 1) {
goto fail;
+ }
usb_serial_token_in(s, p);
break;
@@ -464,21 +482,24 @@ static void usb_serial_read(void *opaque, const uint8_t *buf, int size)
int first_size, start;
/* room in the buffer? */
- if (size > (RECV_BUF - s->recv_used))
+ if (size > (RECV_BUF - s->recv_used)) {
size = RECV_BUF - s->recv_used;
+ }
start = s->recv_ptr + s->recv_used;
if (start < RECV_BUF) {
/* copy data to end of buffer */
first_size = RECV_BUF - start;
- if (first_size > size)
+ if (first_size > size) {
first_size = size;
+ }
memcpy(s->recv_buf + start, buf, first_size);
/* wrap around to front if needed */
- if (size > first_size)
+ if (size > first_size) {
memcpy(s->recv_buf, buf + first_size, size - first_size);
+ }
} else {
start -= RECV_BUF;
memcpy(s->recv_buf + start, buf, size);
@@ -493,23 +514,23 @@ static void usb_serial_event(void *opaque, QEMUChrEvent event)
USBSerialState *s = opaque;
switch (event) {
- case CHR_EVENT_BREAK:
- s->event_trigger |= FTDI_BI;
- break;
- case CHR_EVENT_OPENED:
- if (!s->dev.attached) {
- usb_device_attach(&s->dev, &error_abort);
- }
- break;
- case CHR_EVENT_CLOSED:
- if (s->dev.attached) {
- usb_device_detach(&s->dev);
- }
- break;
- case CHR_EVENT_MUX_IN:
- case CHR_EVENT_MUX_OUT:
- /* Ignore */
- break;
+ case CHR_EVENT_BREAK:
+ s->event_trigger |= FTDI_BI;
+ break;
+ case CHR_EVENT_OPENED:
+ if (!s->dev.attached) {
+ usb_device_attach(&s->dev, &error_abort);
+ }
+ break;
+ case CHR_EVENT_CLOSED:
+ if (s->dev.attached) {
+ usb_device_detach(&s->dev);
+ }
+ break;
+ case CHR_EVENT_MUX_IN:
+ case CHR_EVENT_MUX_OUT:
+ /* Ignore */
+ break;
}
}
@@ -549,8 +570,9 @@ static USBDevice *usb_braille_init(const char *unused)
Chardev *cdrv;
cdrv = qemu_chr_new("braille", "braille", NULL);
- if (!cdrv)
+ if (!cdrv) {
return NULL;
+ }
dev = usb_new("usb-braille");
qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);