@@ -52,6 +52,7 @@
/* SET_FLOW_CTRL */
+#define FTDI_NO_HS 0
#define FTDI_RTS_CTS_HS 1
#define FTDI_DTR_DSR_HS 2
#define FTDI_XON_XOFF_HS 4
@@ -98,6 +99,9 @@ struct USBSerialState {
uint8_t error_chr;
uint8_t event_trigger;
bool always_plugged;
+ uint8_t flow_control;
+ uint8_t xon;
+ uint8_t xoff;
QEMUSerialSetParams params;
int latency; /* ms */
CharBackend cs;
@@ -181,14 +185,36 @@ static const USBDesc desc_braille = {
.str = desc_strings,
};
+static void usb_serial_set_flow_control(USBSerialState *s,
+ uint8_t flow_control)
+{
+ USBDevice *dev = USB_DEVICE(s);
+ USBBus *bus = usb_bus_from_device(dev);
+
+ /* TODO: ioctl */
+ s->flow_control = flow_control;
+ trace_usb_serial_set_flow_control(bus->busnr, dev->addr, flow_control);
+}
+
+static void usb_serial_set_xonxoff(USBSerialState *s, int xonxoff)
+{
+ USBDevice *dev = USB_DEVICE(s);
+ USBBus *bus = usb_bus_from_device(dev);
+
+ s->xon = xonxoff & 0xff;
+ s->xoff = (xonxoff >> 8) & 0xff;
+
+ trace_usb_serial_set_xonxoff(bus->busnr, dev->addr, s->xon, s->xoff);
+}
+
static void usb_serial_reset(USBSerialState *s)
{
- /* TODO: Set flow control to none */
s->event_chr = 0x0d;
s->event_trigger = 0;
s->recv_ptr = 0;
s->recv_used = 0;
/* TODO: purge in char driver */
+ usb_serial_set_flow_control(s, FTDI_NO_HS);
}
static void usb_serial_handle_reset(USBDevice *dev)
@@ -285,9 +311,15 @@ static void usb_serial_handle_control(USBDevice *dev, USBPacket *p,
qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_TIOCM, &flags);
break;
}
- case VendorDeviceOutRequest | FTDI_SET_FLOW_CTRL:
- /* TODO: ioctl */
+ case VendorDeviceOutRequest | FTDI_SET_FLOW_CTRL: {
+ uint8_t flow_control = index >> 8;
+
+ usb_serial_set_flow_control(s, flow_control);
+ if (flow_control & FTDI_XON_XOFF_HS) {
+ usb_serial_set_xonxoff(s, value);
+ }
break;
+ }
case VendorDeviceOutRequest | FTDI_SET_BAUD: {
static const int subdivisors8[8] = { 0, 4, 2, 1, 3, 5, 6, 7 };
int subdivisor8 = subdivisors8[((value & 0xc000) >> 14)
@@ -331,3 +331,5 @@ usb_serial_unsupported_data_bits(int bus, int addr, int value) "dev %d:%u unsupp
usb_serial_bad_token(int bus, int addr) "dev %d:%u bad token"
usb_serial_set_baud(int bus, int addr, int baud) "dev %d:%u baud rate %d"
usb_serial_set_data(int bus, int addr, int parity, int data, int stop) "dev %d:%u parity %c, data bits %d, stop bits %d"
+usb_serial_set_flow_control(int bus, int addr, int index) "dev %d:%u flow control %d"
+usb_serial_set_xonxoff(int bus, int addr, uint8_t xon, uint8_t xoff) "dev %d:%u xon 0x%x xoff 0x%x"