deleted file mode 100644
@@ -1,90 +0,0 @@
-Freescale i.MX7 Mipi CSI2
-=========================
-
-mipi_csi2 node
---------------
-
-This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
-compatible with previous version of Samsung D-phy.
-
-Required properties:
-
-- compatible : "fsl,imx7-mipi-csi2";
-- reg : base address and length of the register set for the device;
-- interrupts : should contain MIPI CSIS interrupt;
-- clocks : list of clock specifiers, see
- Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
-- clock-names : must contain "pclk", "wrap" and "phy" entries, matching
- entries in the clock property;
-- power-domains : a phandle to the power domain, see
- Documentation/devicetree/bindings/power/power_domain.txt for details.
-- reset-names : should include following entry "mrst";
-- resets : a list of phandle, should contain reset entry of
- reset-names;
-- phy-supply : from the generic phy bindings, a phandle to a regulator that
- provides power to MIPI CSIS core;
-
-Optional properties:
-
-- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
- value when this property is not specified is 166 MHz;
-- fsl,csis-hs-settle : differential receiver (HS-RX) settle time;
-
-The device node should contain two 'port' child nodes with one child 'endpoint'
-node, according to the bindings defined in:
- Documentation/devicetree/bindings/ media/video-interfaces.txt.
- The following are properties specific to those nodes.
-
-port node
----------
-
-- reg : (required) can take the values 0 or 1, where 0 shall be
- related to the sink port and port 1 shall be the source
- one;
-
-endpoint node
--------------
-
-- data-lanes : (required) an array specifying active physical MIPI-CSI2
- data input lanes and their mapping to logical lanes; this
- shall only be applied to port 0 (sink port), the array's
- content is unused only its length is meaningful,
- in this case the maximum length supported is 2;
-
-example:
-
- mipi_csi: mipi-csi@30750000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "fsl,imx7-mipi-csi2";
- reg = <0x30750000 0x10000>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_IPG_ROOT_CLK>,
- <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
- <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
- clock-names = "pclk", "wrap", "phy";
- clock-frequency = <166000000>;
- power-domains = <&pgc_mipi_phy>;
- phy-supply = <®_1p0d>;
- resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
- reset-names = "mrst";
- fsl,csis-hs-settle = <3>;
-
- port@0 {
- reg = <0>;
-
- mipi_from_sensor: endpoint {
- remote-endpoint = <&ov2680_to_mipi>;
- data-lanes = <1>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- mipi_vc0_to_csi_mux: endpoint {
- remote-endpoint = <&csi_mux_from_mipi_vc0>;
- };
- };
- };
new file mode 100644
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX7 Mipi CSI2
+
+maintainers:
+ - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |
+ this is the device node for the mipi csi-2 receiver core in i.mx7 soc. it is
+ compatible with previous version of samsung d-phy.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx7-mipi-csi2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: wrap
+ - const: phy
+
+ power-domains:
+ maxItems: 1
+
+ phy-supply:
+ description:
+ Phandle to a regulator that provides power to the PHY. This
+ regulator will be managed during the PHY power on/off sequence.
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: mrst
+
+ clock-frequency:
+ description:
+ The IP main (system bus) clock frequency in Hertz
+ default: 166000000
+
+ fsl,csis-hs-settle:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ differential receiver (HS-RX) settle time
+
+ ports:
+ type: object
+ description:
+ A node containing input and output port nodes with endpoint definitions
+ as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ port@0:
+ type: object
+ description:
+ Input port node, single endpoint describing the CSI-2 transmitter.
+
+ properties:
+ reg:
+ const: 0
+
+ endpoint:
+ type: object
+
+ properties:
+ data-lanes:
+ maxItems: 1
+
+ remote-endpoint: true
+
+ required:
+ - data-lanes
+ - remote-endpoint
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+ port@1:
+ type: object
+ description:
+ Output port node,
+
+ properties:
+ reg:
+ const: 1
+
+ endpoint:
+ type: object
+
+ properties:
+ remote-endpoint: true
+
+ required:
+ - remote-endpoint
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+ - reset-names
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx7d-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/reset/imx7-reset.h>
+
+ mipi_csi: mipi-csi@30750000 {
+ compatible = "fsl,imx7-mipi-csi2";
+ reg = <0x30750000 0x10000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+ <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+ clock-names = "pclk", "wrap", "phy";
+ clock-frequency = <166000000>;
+
+ power-domains = <&pgc_mipi_phy>;
+ phy-supply = <®_1p0d>;
+ resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+ reset-names = "mrst";
+ fsl,csis-hs-settle = <3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_from_sensor: endpoint {
+ remote-endpoint = <&ov2680_to_mipi>;
+ data-lanes = <1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_vc0_to_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_from_mipi_vc0>;
+ };
+ };
+ };
+ };
@@ -10773,8 +10773,8 @@ L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
F: Documentation/admin-guide/media/imx7.rst
-F: Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
+F: Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
F: drivers/staging/media/imx/imx7-media-csi.c
F: drivers/staging/media/imx/imx7-mipi-csis.c
Convert imx7 mipi csi2 bindings documentation to yaml schema, remove the textual document and update MAINTAINERS entry. Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> --- .../bindings/media/imx7-mipi-csi2.txt | 90 --------- .../bindings/media/nxp,imx7-mipi-csi2.yaml | 181 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 182 insertions(+), 91 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml -- 2.28.0