| Message ID | 20201022032547.92704-2-john.stultz@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,1/2] usb: dwc3: Trigger a GCTL soft reset when switching modes in DRD | expand |
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index a2a88284a95b..c87d8add19e4 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -40,6 +40,8 @@ #define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */ +static int dwc3_core_soft_reset(struct dwc3 *dwc); + /** * dwc3_get_dr_mode - Validates and sets dr_mode * @dwc: pointer to our context structure @@ -177,6 +179,7 @@ static void __dwc3_set_mode(struct work_struct *work) dwc3_set_prtcap(dwc, dwc->desired_dr_role); + dwc3_core_soft_reset(dwc); spin_unlock_irqrestore(&dwc->lock, flags); switch (dwc->desired_dr_role) {
In reviewing the previous patch, Thinh Nguyen pointed out that the DRD mode change sequence should be like the following when switching from host -> device according to the programming guide (for all DRD IPs): 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(device) 3. Soft reset with DCTL.CSftRst 4. Then follow up with the initializing registers sequence The current code does: a. Soft reset with DCTL.CSftRst on driver probe b. Reset controller with GCTL.CoreSoftReset (added in previous patch) c. Set GCTL.PrtCapDir(device) d. < missing DCTL.CSftRst > e. Then follow up with initializing registers sequence So this patch adds the DCTL.CSftRst soft reset that was currently missing from the dwc3 mode switching. Cc: Felipe Balbi <balbi@kernel.org> Cc: Tejas Joglekar <tejas.joglekar@synopsys.com> Cc: Yang Fei <fei.yang@intel.com> Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Jun Li <lijun.kernel@gmail.com> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> --- Feedback would be appreciated. I'm a little worried I should be conditionalizing the DCTL.CSftRst on DRD mode controllers, but I'm really not sure what the right thing to do is for non-DRD mode controllers. --- drivers/usb/dwc3/core.c | 3 +++ 1 file changed, 3 insertions(+) -- 2.17.1