@@ -8,10 +8,16 @@ Required properties:
- reg : The I2C address of the device.
+Optional properties:
+
+- realtek,power-up-delay-ms
+ Set a delay time for flush work to be completed,
+ this value is adjustable depending on platform.
Example:
rt1015: codec@28 {
compatible = "realtek,rt1015";
reg = <0x28>;
+ realtek,power-up-delay-ms = <50>;
};
new file mode 100644
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/sound/rt1015.h -- Platform data for RT1015
+ *
+ * Copyright 2020 Realtek Microelectronics
+ */
+
+#ifndef __LINUX_SND_RT1015_H
+#define __LINUX_SND_RT1015_H
+
+struct rt1015_platform_data {
+ unsigned int power_up_delay_ms;
+};
+
+#endif
@@ -27,10 +27,15 @@
#include <sound/soc-dapm.h>
#include <sound/soc.h>
#include <sound/tlv.h>
+#include <sound/rt1015.h>
#include "rl6231.h"
#include "rt1015.h"
+static const struct rt1015_platform_data i2s_default_platform_data = {
+ .power_up_delay_ms = 50,
+};
+
static const struct reg_default rt1015_reg[] = {
{ 0x0000, 0x0000 },
{ 0x0004, 0xa000 },
@@ -650,6 +655,7 @@ static int rt1015_amp_drv_event(struct snd_soc_dapm_widget *w,
case SND_SOC_DAPM_POST_PMU:
if (rt1015->hw_config == RT1015_HW_28)
schedule_delayed_work(&rt1015->flush_work, msecs_to_jiffies(10));
+ msleep(rt1015->pdata.power_up_delay_ms);
break;
default:
break;
@@ -1067,9 +1073,16 @@ static struct acpi_device_id rt1015_acpi_match[] = {
MODULE_DEVICE_TABLE(acpi, rt1015_acpi_match);
#endif
+static void rt1015_parse_dt(struct rt1015_priv *rt1015, struct device *dev)
+{
+ device_property_read_u32(dev, "realtek,power-up-delay-ms",
+ &rt1015->pdata.power_up_delay_ms);
+}
+
static int rt1015_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
+ struct rt1015_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt1015_priv *rt1015;
int ret;
unsigned int val;
@@ -1081,6 +1094,13 @@ static int rt1015_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, rt1015);
+ rt1015->pdata = i2s_default_platform_data;
+
+ if (pdata)
+ rt1015->pdata = *pdata;
+ else
+ rt1015_parse_dt(rt1015, &i2c->dev);
+
rt1015->regmap = devm_regmap_init_i2c(i2c, &rt1015_regmap);
if (IS_ERR(rt1015->regmap)) {
ret = PTR_ERR(rt1015->regmap);
@@ -12,6 +12,7 @@
#ifndef __RT1015_H__
#define __RT1015_H__
+#include <sound/rt1015.h>
#define RT1015_DEVICE_ID_VAL 0x1011
#define RT1015_DEVICE_ID_VAL2 0x1015
@@ -380,6 +381,7 @@ enum {
struct rt1015_priv {
struct snd_soc_component *component;
+ struct rt1015_platform_data pdata;
struct regmap *regmap;
int sysclk;
int sysclk_src;