| Message ID | 20201109173541.10016-2-stanimir.varbanov@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | MFC private ctrls to std ctrls | expand |
On 09/11/2020 18:35, Stanimir Varbanov wrote: > Make display delay and display delay enable MFC controls standard v4l > controls. This will allow reuse of the controls for other decoder > drivers. Also the new proposed controls are now codec agnostic because > they could be used for any codec. > > Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> > --- > .../userspace-api/media/v4l/ext-ctrls-codec.rst | 15 +++++++++++++++ > drivers/media/v4l2-core/v4l2-ctrls.c | 4 ++++ > include/uapi/linux/v4l2-controls.h | 2 ++ > 3 files changed, 21 insertions(+) > > diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > index ce728c757eaf..82c9cda40270 100644 > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > @@ -679,6 +679,21 @@ enum v4l2_mpeg_video_frame_skip_mode - > otherwise the decoder expects a single frame in per buffer. > Applicable to the decoder, all codecs. > > +``V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY_ENABLE (boolean)`` I'd use _DEC_ instead of _DECODER_. > + If the display delay is enabled then the decoder is forced to return > + a CAPTURE buffer (decoded frame) after processing a certain number > + of OUTPUT buffers. The delay can be set through > + ``V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY``. This > + feature can be used for example for generating thumbnails of videos. > + Applicable to the decoder. Hmm. Is this: "after processing the first 'display delay' number of OUTPUT buffers." Or is this: "every 'display delay' number of OUTPUT buffers." I.e., is it a one-shot thing or a periodical thing? If it is a one-shot thing, then this should probably be a button type, not a boolean. > + > +``V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY (integer)`` > + Display delay value for decoder. The decoder is forced to > + return a decoded frame after the set 'display delay' number of > + frames. If this number is low it may result in frames returned out > + of display order, in addition the hardware may still be using the > + returned buffer as a reference picture for subsequent frames. Can this be 0? And if so, what does that mean? > + > ``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)`` > Enable writing sample aspect ratio in the Video Usability > Information. Applicable to the H264 encoder. > diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c > index bd7f330c941c..4a21802e026b 100644 > --- a/drivers/media/v4l2-core/v4l2-ctrls.c > +++ b/drivers/media/v4l2-core/v4l2-ctrls.c > @@ -874,6 +874,8 @@ const char *v4l2_ctrl_get_name(u32 id) > case V4L2_CID_MPEG_VIDEO_HEADER_MODE: return "Sequence Header Mode"; > case V4L2_CID_MPEG_VIDEO_MAX_REF_PIC: return "Max Number of Reference Pics"; > case V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE: return "Frame Skip Mode"; > + case V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY: return "Display Delay"; > + case V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY_ENABLE: return "Display Delay Enable"; > case V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP: return "H263 I-Frame QP Value"; > case V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP: return "H263 P-Frame QP Value"; > case V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP: return "H263 B-Frame QP Value"; > @@ -1221,6 +1223,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, > case V4L2_CID_FLASH_READY: > case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER: > case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE: > + case V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY_ENABLE: > case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE: > case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE: > case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM: > @@ -1256,6 +1259,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, > break; > case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE: > case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE: > + case V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY: > *type = V4L2_CTRL_TYPE_INTEGER; > break; > case V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME: > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h > index 7035f4fb182c..d6b19f8d0022 100644 > --- a/include/uapi/linux/v4l2-controls.h > +++ b/include/uapi/linux/v4l2-controls.h > @@ -773,6 +773,8 @@ enum v4l2_mpeg_video_frame_skip_mode { > V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1, > V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT = 2, > }; > +#define V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY (V4L2_CID_MPEG_BASE + 647) > +#define V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY_ENABLE (V4L2_CID_MPEG_BASE + 648) This will need to be rebased once this PR is merged: https://patchwork.linuxtv.org/project/linux-media/patch/d68da172-b251-000f-653d-38a8a4c7b715@xs4all.nl/ > > /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ > #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) > Regards, Hans
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index ce728c757eaf..82c9cda40270 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -679,6 +679,21 @@ enum v4l2_mpeg_video_frame_skip_mode - otherwise the decoder expects a single frame in per buffer. Applicable to the decoder, all codecs. +``V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY_ENABLE (boolean)`` + If the display delay is enabled then the decoder is forced to return + a CAPTURE buffer (decoded frame) after processing a certain number + of OUTPUT buffers. The delay can be set through + ``V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY``. This + feature can be used for example for generating thumbnails of videos. + Applicable to the decoder. + +``V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY (integer)`` + Display delay value for decoder. The decoder is forced to + return a decoded frame after the set 'display delay' number of + frames. If this number is low it may result in frames returned out + of display order, in addition the hardware may still be using the + returned buffer as a reference picture for subsequent frames. + ``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)`` Enable writing sample aspect ratio in the Video Usability Information. Applicable to the H264 encoder. diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index bd7f330c941c..4a21802e026b 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -874,6 +874,8 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_VIDEO_HEADER_MODE: return "Sequence Header Mode"; case V4L2_CID_MPEG_VIDEO_MAX_REF_PIC: return "Max Number of Reference Pics"; case V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE: return "Frame Skip Mode"; + case V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY: return "Display Delay"; + case V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY_ENABLE: return "Display Delay Enable"; case V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP: return "H263 I-Frame QP Value"; case V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP: return "H263 P-Frame QP Value"; case V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP: return "H263 B-Frame QP Value"; @@ -1221,6 +1223,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_FLASH_READY: case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER: case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE: + case V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY_ENABLE: case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE: case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE: case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM: @@ -1256,6 +1259,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, break; case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE: case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE: + case V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY: *type = V4L2_CTRL_TYPE_INTEGER; break; case V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME: diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 7035f4fb182c..d6b19f8d0022 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -773,6 +773,8 @@ enum v4l2_mpeg_video_frame_skip_mode { V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1, V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT = 2, }; +#define V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY (V4L2_CID_MPEG_BASE + 647) +#define V4L2_CID_MPEG_VIDEO_DECODER_DISPLAY_DELAY_ENABLE (V4L2_CID_MPEG_BASE + 648) /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000)
Make display delay and display delay enable MFC controls standard v4l controls. This will allow reuse of the controls for other decoder drivers. Also the new proposed controls are now codec agnostic because they could be used for any codec. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> --- .../userspace-api/media/v4l/ext-ctrls-codec.rst | 15 +++++++++++++++ drivers/media/v4l2-core/v4l2-ctrls.c | 4 ++++ include/uapi/linux/v4l2-controls.h | 2 ++ 3 files changed, 21 insertions(+) -- 2.17.1