@@ -35,6 +35,37 @@ static int usb_serial_device_match(struct device *dev,
return 0;
}
+static ssize_t nordy_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_serial_port *port = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", tty_port_nordy(&port->port));
+}
+
+static ssize_t nordy_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_serial_port *port = dev_get_drvdata(dev);
+ bool val;
+ int ret;
+
+ ret = kstrtobool(buf, &val);
+ if (ret)
+ return ret;
+
+ tty_port_set_nordy(&port->port, val);
+
+ return count;
+}
+static DEVICE_ATTR_RW(nordy);
+
+static struct attribute *tty_attrs[] = {
+ &dev_attr_nordy.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(tty);
+
static int usb_serial_device_probe(struct device *dev)
{
struct usb_serial_driver *driver;
@@ -60,8 +91,8 @@ static int usb_serial_device_probe(struct device *dev)
}
minor = port->minor;
- tty_dev = tty_port_register_device(&port->port, usb_serial_tty_driver,
- minor, dev);
+ tty_dev = tty_port_register_device_attr(&port->port,
+ usb_serial_tty_driver, minor, dev, port, tty_groups);
if (IS_ERR(tty_dev)) {
retval = PTR_ERR(tty_dev);
goto err_port_remove;
Add a nordy sysfs attribute to suppress raising the modem-control lines on open to signal DTE readiness. This can be used to prevent undesirable side-effects on open for applications where the DTR and RTS lines are used for non-standard purposes such as generating power-on and reset pulses. Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/usb/serial/bus.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)