@@ -247,6 +247,16 @@ static void xenon_voltage_switch(struct sdhci_host *host)
sdhci_readw(host, SDHCI_HOST_CONTROL2);
}
+static unsigned int xenon_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ if (pltfm_host->clk)
+ return sdhci_pltfm_clk_get_max_clock(host);
+ else
+ return pltfm_host->clock;
+}
+
static const struct sdhci_ops sdhci_xenon_ops = {
.voltage_switch = xenon_voltage_switch,
.set_clock = sdhci_set_clock,
@@ -254,7 +264,7 @@ static const struct sdhci_ops sdhci_xenon_ops = {
.set_bus_width = sdhci_set_bus_width,
.reset = xenon_reset,
.set_uhs_signaling = xenon_set_uhs_signaling,
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+ .get_max_clock = xenon_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
@@ -483,6 +493,7 @@ static void xenon_sdhc_unprepare(struct sdhci_host *host)
static int xenon_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
+ struct device *dev = &pdev->dev;
struct sdhci_host *host;
struct xenon_priv *priv;
int err;
@@ -503,25 +514,27 @@ static int xenon_probe(struct platform_device *pdev)
*/
xenon_replace_mmc_host_ops(host);
- pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
- if (IS_ERR(pltfm_host->clk)) {
- err = PTR_ERR(pltfm_host->clk);
- dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
- goto free_pltfm;
- }
- err = clk_prepare_enable(pltfm_host->clk);
- if (err)
- goto free_pltfm;
-
- priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
- if (IS_ERR(priv->axi_clk)) {
- err = PTR_ERR(priv->axi_clk);
- if (err == -EPROBE_DEFER)
- goto err_clk;
- } else {
- err = clk_prepare_enable(priv->axi_clk);
+ if (dev->of_node) {
+ pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(pltfm_host->clk)) {
+ err = PTR_ERR(pltfm_host->clk);
+ dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
+ goto free_pltfm;
+ }
+ err = clk_prepare_enable(pltfm_host->clk);
if (err)
- goto err_clk;
+ goto free_pltfm;
+
+ priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
+ if (IS_ERR(priv->axi_clk)) {
+ err = PTR_ERR(priv->axi_clk);
+ if (err == -EPROBE_DEFER)
+ goto err_clk;
+ } else {
+ err = clk_prepare_enable(priv->axi_clk);
+ if (err)
+ goto err_clk;
+ }
}
err = mmc_of_parse(host->mmc);
As a preparation for supporting ACPI, modify the driver to use the clk framework only when booting with DT - otherwise rely on the configuration done by firmware. For that purpose introduce also a custom SDHCI get_max_clock callback. Signed-off-by: Marcin Wojtas <mw@semihalf.com> --- drivers/mmc/host/sdhci-xenon.c | 51 ++++++++++++-------- 1 file changed, 32 insertions(+), 19 deletions(-)