@@ -459,6 +459,35 @@ struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
CLK_MGT_ENTRY(UICCCLK),
};
+static struct regulator *hwacc_regulator[NUM_HW_ACC];
+static struct regulator *hwacc_ret_regulator[NUM_HW_ACC];
+
+static bool hwacc_enabled[NUM_HW_ACC];
+static bool hwacc_ret_enabled[NUM_HW_ACC];
+
+static const char *hwacc_regulator_name[NUM_HW_ACC] = {
+ [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp",
+ [HW_ACC_SVAPIPE] = "hwacc-sva-pipe",
+ [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp",
+ [HW_ACC_SIAPIPE] = "hwacc-sia-pipe",
+ [HW_ACC_SGA] = "hwacc-sga",
+ [HW_ACC_B2R2] = "hwacc-b2r2",
+ [HW_ACC_MCDE] = "hwacc-mcde",
+ [HW_ACC_ESRAM1] = "hwacc-esram1",
+ [HW_ACC_ESRAM2] = "hwacc-esram2",
+ [HW_ACC_ESRAM3] = "hwacc-esram3",
+ [HW_ACC_ESRAM4] = "hwacc-esram4",
+};
+
+static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
+ [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp-ret",
+ [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp-ret",
+ [HW_ACC_ESRAM1] = "hwacc-esram1-ret",
+ [HW_ACC_ESRAM2] = "hwacc-esram2-ret",
+ [HW_ACC_ESRAM3] = "hwacc-esram3-ret",
+ [HW_ACC_ESRAM4] = "hwacc-esram4-ret",
+};
+
/*
* Used by MCDE to setup all necessary PRCMU registers
*/
@@ -1023,6 +1052,34 @@ int prcmu_release_usb_wakeup_state(void)
return r;
}
+static int request_pll(u8 clock, bool enable)
+{
+ int r = 0;
+
+ if (clock == PRCMU_PLLSOC1)
+ clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
+ else
+ return -EINVAL;
+
+ mutex_lock(&mb1_transfer.lock);
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ cpu_relax();
+
+ writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+ writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF));
+
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
+ wait_for_completion(&mb1_transfer.work);
+
+ if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF)
+ r = -EIO;
+
+ mutex_unlock(&mb1_transfer.lock);
+
+ return r;
+}
+
/**
* db8500_prcmu_set_epod - set the state of a EPOD (power domain)
* @epod_id: The EPOD to set
@@ -1220,6 +1277,26 @@ static int request_reg_clock(u8 clock, bool enable)
return 0;
}
+static int request_sga_clock(u8 clock, bool enable)
+{
+ u32 val;
+ int ret;
+
+ if (enable) {
+ val = readl(PRCM_CGATING_BYPASS);
+ writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+ }
+
+ ret = request_reg_clock(clock, enable);
+
+ if (!ret && !enable) {
+ val = readl(PRCM_CGATING_BYPASS);
+ writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+ }
+
+ return ret;
+}
+
/**
* db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
* @clock: The clock for which the request is made.
@@ -1230,12 +1307,16 @@ static int request_reg_clock(u8 clock, bool enable)
*/
int db8500_prcmu_request_clock(u8 clock, bool enable)
{
- if (clock < PRCMU_NUM_REG_CLOCKS)
+ if (clock == PRCMU_SGACLK)
+ return request_sga_clock(clock, enable);
+ else if (clock < PRCMU_NUM_REG_CLOCKS)
return request_reg_clock(clock, enable);
else if (clock == PRCMU_TIMCLK)
return request_timclk(enable);
else if (clock == PRCMU_SYSCLK)
return request_sysclk(enable);
+ else if (clock == PRCMU_PLLSOC1)
+ return request_pll(clock, enable);
else
return -EINVAL;
}