@@ -301,14 +301,11 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- ap7 \
- ap720t \
armadillo \
B2 \
ep7312 \
evb4510 \
impa7 \
- integratorap \
lpc2292sodimm \
modnet50 \
SMN42 \
@@ -320,17 +317,7 @@ LIST_ARM7=" \
LIST_ARM9=" \
a320evb \
- ap920t \
- ap922_XA10 \
- ap926ejs \
- ap946es \
- ap966 \
aspenite \
- cp920t \
- cp922_XA10 \
- cp926ejs \
- cp946es \
- cp966 \
da830evm \
da850evm \
edb9301 \
@@ -389,18 +376,9 @@ LIST_ARM9=" \
"
#########################################################################
-## ARM10 Systems
-#########################################################################
-LIST_ARM10=" \
- integratorcp \
- cp1026 \
-"
-
-#########################################################################
## ARM11 Systems
#########################################################################
LIST_ARM11=" \
- cp1136 \
omap2420h4 \
apollon \
imx31_litekit \
@@ -798,32 +798,6 @@ M5485HFE_config : unconfig
# ARM
#========================================================================
-########################################################################
-## ARM Integrator boards - see doc/README-integrator for more info.
-integratorap_config \
-ap_config \
-ap966_config \
-ap922_config \
-ap922_XA10_config \
-ap7_config \
-ap720t_config \
-ap920t_config \
-ap926ejs_config \
-ap946es_config: unconfig
- @board/armltd/integrator/split_by_variant.sh ap $@
-
-integratorcp_config \
-cp_config \
-cp920t_config \
-cp926ejs_config \
-cp946es_config \
-cp1136_config \
-cp966_config \
-cp922_config \
-cp922_XA10_config \
-cp1026_config: unconfig
- @board/armltd/integrator/split_by_variant.sh cp $@
-
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
@@ -970,7 +944,6 @@ clean:
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/voiceblue/eeprom \
- $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@@ -82,9 +82,4 @@ static void cache_flush (void)
asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
}
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* No specific cache setup for IntegratorAP/CM720T as yet */
- void icache_enable (void)
- {
- }
#endif
deleted file mode 100755
@@ -1,220 +0,0 @@
-#!/bin/sh
-
-mkdir -p ${obj}include
-mkdir -p ${obj}board/armltd/integrator
-
-config_file=${obj}include/config.h
-
-if [ "$1" = "ap" ]
-then
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat > ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_INTEGRATOR 1 /* Integrator/AP */
-_EOF
-
-# ---------------------------------------------------------
-# Set the core module defines according to Core Module
-# ---------------------------------------------------------
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
- echo "$0:: No parameters - using arm_intcm"
-else
- case "$2" in
- ap7_config)
- cpu="arm_intcm"
- variant="unported core module CM7TDMI"
- ;;
-
- ap966)
- cpu="arm_intcm"
- variant="unported core module CM966E-S"
- ;;
-
- ap922_config)
- cpu="arm_intcm"
- variant="unported core module CM922T"
- ;;
-
- integratorap_config | \
- ap_config)
- cpu="arm_intcm"
- variant="unspecified core module"
- ;;
-
- ap720t_config)
- cpu="arm720t"
- echo "#define CONFIG_CM720T 1 /* CPU core is ARM720T */" \
- >> ${config_file}
- variant="Core module CM720T"
- ;;
-
- ap922_XA10_config)
- cpu="arm_intcm"
- variant="unported core module CM922T_XA10"
- echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
- >> ${config_file}
- ;;
-
- ap920t_config)
- cpu="arm920t"
- variant="Core module CM920T"
- echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
- >> ${config_file}
- ;;
-
- ap926ejs_config)
- cpu="arm926ejs"
- variant="Core module CM926EJ-S"
- echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
- >> ${config_file}
- ;;
-
- ap946es_config)
- cpu="arm946es"
- variant="Core module CM946E-S"
- echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
- >> ${config_file}
- ;;
-
- *)
- echo "$0:: Unknown core module"
- variant="unknown core module"
- cpu="arm_intcm"
- ;;
-
- esac
-fi
-
-case "$cpu" in
- arm_intcm)
- cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
- ;;
-
- arm720t)
- cat >> ${config_file} << _EOF
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
- ;;
-esac
-
-else
-
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat >> ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_CINTEGRATOR 1 /* Integrator/CP */
-_EOF
-
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
- echo "$0:: No parameters - using arm_intcm"
-else
- case "$2" in
- ap966)
- cpu="arm_intcm"
- variant="unported core module CM966E-S"
- ;;
-
- ap922_config)
- cpu="arm_intcm"
- variant="unported core module CM922T"
- ;;
-
- integratorcp_config | \
- cp_config)
- cpu="arm_intcm"
- variant="unspecified core module"
- ;;
-
- cp922_XA10_config)
- cpu="arm_intcm"
- variant="unported core module CM922T_XA10"
- echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
- >> ${config_file}
- ;;
-
- cp920t_config)
- cpu="arm920t"
- variant="Core module CM920T"
- echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
- >> ${config_file}
- ;;
-
- cp926ejs_config)
- cpu="arm926ejs"
- variant="Core module CM926EJ-S"
- echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
- >> ${config_file}
- ;;
-
-
- cp946es_config)
- cpu="arm946es"
- variant="Core module CM946E-S"
- echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
- >> ${config_file}
- ;;
-
- cp1136_config)
- cpu="arm1136"
- variant="Core module CM1136EJF-S"
- echo "#define CONFIG_CM1136EJF_S 1 /* CPU core is ARM1136JF-S */" \
- >> ${config_file}
- ;;
-
- *)
- echo "$0:: Unknown core module"
- variant="unknown core module"
- cpu="arm_intcm"
- ;;
-
- esac
-
-fi
-
-if [ "$cpu" = "arm_intcm" ]
-then
- cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-_EOF
-fi
-
-fi # ap
-
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a -n "${2%%_config}" integrator$1 arm $cpu integrator armltd
-echo "Variant: $variant with core $cpu"
@@ -35,6 +35,7 @@
# Target ARCH CPU Board name Vendor SoC Options
###########################################################################################################
+integratorcp_cm1136 arm arm1136 integrator armltd - integratorcp
qong arm arm1136 - davedenx mx31
mx31ads arm arm1136 - freescale mx31
imx31_litekit arm arm1136 - logicpd mx31
@@ -45,9 +46,12 @@ armadillo arm arm720t
ep7312 arm arm720t
impa7 arm arm720t
modnet50 arm arm720t
+integratorap_cm720t arm arm720t integrator armltd - integratorap
lpc2292sodimm arm arm720t - - lpc2292
SMN42 arm arm720t - siemens lpc2292
evb4510 arm arm720t - - s3c4510b
+integratorap_cm920t arm arm920t integrator armltd - integratorap
+integratorcp_cm920t arm arm920t integrator armltd - integratorcp
a320evb arm arm920t - faraday a320
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
@@ -71,6 +75,8 @@ smdk2410 arm arm920t - samsung
netstar arm arm925t
voiceblue arm arm925t
omap1510inn arm arm925t - ti
+integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap
+integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp
versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU
versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB
versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB
@@ -164,6 +170,8 @@ nhk8815_onenand arm arm926ejs nhk8815 st
omap5912osk arm arm926ejs - ti omap
edminiv2 arm arm926ejs - LaCie orion5x
dkb arm arm926ejs - Marvell pantheon
+integratorap_cm946es arm arm946es integrator armltd - integratorap
+integratorcp_cm946es arm arm946es integrator armltd - integratorcp
ca9x4_ct_vxp arm armv7 vexpress armltd
efikamx arm armv7 efikamx - mx5 efikamx:IMX_CONFIG=board/efikamx/imximage.cfg
mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
@@ -30,6 +30,9 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+
+#define CONFIG_INTEGRATOR
+#define CONFIG_ARCH_INTEGRATOR
/*
* High Level Configuration Options
* (easy to change)
@@ -31,6 +31,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_INTEGRATOR
+#define CONFIG_ARCH_INTEGRATOR
/*
* High Level Configuration Options
* (easy to change)
This deletes the integrator split_by_variant.sh script and defines a number of unique board types for the core modules that are meaningful to support for the Integrator AP/CP, i.e. the ones that did not just say "unsupported core module" in split_by_variant.sh. If more core modules need to be supported they are easy to add. We delete all the old cruft in Makefile and MAKEALL that was working around the old way of building boards. We create a unique config file per board to satisfy the build system, but they are just oneliners that include the existing integratorap.h and integratorcp.h configs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Changes v5->v6: - Rebased to Albert's u-boot-arm tree as requested per message <4E3C016D.9020303@aribaud.net> - So rebased on top of commit b9a699da8123efa9f2d15290a6b3a2854e9fab84 "arm: lib: memcpy: Do not copy to same address" which is the HEAD of u-boot-arm as of writing - NO other changes --- MAKEALL | 22 --- Makefile | 27 ---- arch/arm/cpu/arm720t/cpu.c | 5 - board/armltd/integrator/split_by_variant.sh | 220 --------------------------- boards.cfg | 8 + include/configs/integratorap.h | 3 + include/configs/integratorcp.h | 2 + 7 files changed, 13 insertions(+), 274 deletions(-) delete mode 100755 board/armltd/integrator/split_by_variant.sh