Message ID | 1407981307-29400-1-git-send-email-haojian.zhuang@linaro.org |
---|---|
State | Accepted |
Commit | 9cdc99919a95e8b54c1998b65bb1bfdabd47d27b |
Headers | show |
On Thu, 14 Aug 2014, Haojian Zhuang wrote: > Multiple CPU clusters are used in Hisilicon HiP04 SoC. Now use MCPM > framework to manage power on HiP04 SoC. > > Changelog: > v20: > * Disable L2 prefetch when the whole cluster is down. > * Move disabling snoop filter into power_down() after L2 prefetch > disabled. > * Remove delay in wait_for_power_down() after L2 prefetch disabled. > * Add the sleep polling in wait_for_power_down() again since we > need to wait L2 when the cluster is down. > v19: > * Add comments on those delay hacks. > * Update on checking core enabled counts in wait_for_power_down(). > v18: > * Fix to release resource in probe(). > * Check whether cpu is already up in the process of making cpu down. > * Add udelay in power up/down sequence. > * Optimize on setting relocation entry. > * Optimize on polling status in wait_for_power_down(). > * Add mcpm critical operations. > v17: > * Parse bootwrapper parameters in DTS file. > * Fix to use msleep() in spinlock region. > v16: > * Parse bootwrapper parameters in command line instead. > v13: > * Restore power down operation in MCPM. > * Fix disabling snoop filter issue in MCPM. > v12: > * Use wfi as power down state in MCPM. > * Remove wait_for_powerdown() in MCPM because wfi is used now. > > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Nicolas Pitre <nico@linaro.org> Thanks for your persistence. > --- > arch/arm/mach-hisi/Makefile | 1 + > arch/arm/mach-hisi/platmcpm.c | 386 ++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 387 insertions(+) > create mode 100644 arch/arm/mach-hisi/platmcpm.c > > diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile > index ee2506b..d64831e 100644 > --- a/arch/arm/mach-hisi/Makefile > +++ b/arch/arm/mach-hisi/Makefile > @@ -3,4 +3,5 @@ > # > > obj-y += hisilicon.o > +obj-$(CONFIG_MCPM) += platmcpm.o > obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o > diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c > new file mode 100644 > index 0000000..280f3f1 > --- /dev/null > +++ b/arch/arm/mach-hisi/platmcpm.c > @@ -0,0 +1,386 @@ > +/* > + * Copyright (c) 2013-2014 Linaro Ltd. > + * Copyright (c) 2013-2014 Hisilicon Limited. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + */ > +#include <linux/delay.h> > +#include <linux/io.h> > +#include <linux/memblock.h> > +#include <linux/of_address.h> > + > +#include <asm/cputype.h> > +#include <asm/cp15.h> > +#include <asm/mcpm.h> > + > +#include "core.h" > + > +/* bits definition in SC_CPU_RESET_REQ[x]/SC_CPU_RESET_DREQ[x] > + * 1 -- unreset; 0 -- reset > + */ > +#define CORE_RESET_BIT(x) (1 << x) > +#define NEON_RESET_BIT(x) (1 << (x + 4)) > +#define CORE_DEBUG_RESET_BIT(x) (1 << (x + 9)) > +#define CLUSTER_L2_RESET_BIT (1 << 8) > +#define CLUSTER_DEBUG_RESET_BIT (1 << 13) > + > +/* > + * bits definition in SC_CPU_RESET_STATUS[x] > + * 1 -- reset status; 0 -- unreset status > + */ > +#define CORE_RESET_STATUS(x) (1 << x) > +#define NEON_RESET_STATUS(x) (1 << (x + 4)) > +#define CORE_DEBUG_RESET_STATUS(x) (1 << (x + 9)) > +#define CLUSTER_L2_RESET_STATUS (1 << 8) > +#define CLUSTER_DEBUG_RESET_STATUS (1 << 13) > +#define CORE_WFI_STATUS(x) (1 << (x + 16)) > +#define CORE_WFE_STATUS(x) (1 << (x + 20)) > +#define CORE_DEBUG_ACK(x) (1 << (x + 24)) > + > +#define SC_CPU_RESET_REQ(x) (0x520 + (x << 3)) /* reset */ > +#define SC_CPU_RESET_DREQ(x) (0x524 + (x << 3)) /* unreset */ > +#define SC_CPU_RESET_STATUS(x) (0x1520 + (x << 3)) > + > +#define FAB_SF_MODE 0x0c > +#define FAB_SF_INVLD 0x10 > + > +/* bits definition in FB_SF_INVLD */ > +#define FB_SF_INVLD_START (1 << 8) > + > +#define HIP04_MAX_CLUSTERS 4 > +#define HIP04_MAX_CPUS_PER_CLUSTER 4 > + > +#define POLL_MSEC 10 > +#define TIMEOUT_MSEC 1000 > + > +static void __iomem *sysctrl, *fabric; > +static int hip04_cpu_table[HIP04_MAX_CLUSTERS][HIP04_MAX_CPUS_PER_CLUSTER]; > +static DEFINE_SPINLOCK(boot_lock); > +static u32 fabric_phys_addr; > +/* > + * [0]: bootwrapper physical address > + * [1]: bootwrapper size > + * [2]: relocation address > + * [3]: relocation size > + */ > +static u32 hip04_boot_method[4]; > + > +static bool hip04_cluster_is_down(unsigned int cluster) > +{ > + int i; > + > + for (i = 0; i < HIP04_MAX_CPUS_PER_CLUSTER; i++) > + if (hip04_cpu_table[cluster][i]) > + return false; > + return true; > +} > + > +static void hip04_set_snoop_filter(unsigned int cluster, unsigned int on) > +{ > + unsigned long data; > + > + if (!fabric) > + BUG(); > + data = readl_relaxed(fabric + FAB_SF_MODE); > + if (on) > + data |= 1 << cluster; > + else > + data &= ~(1 << cluster); > + writel_relaxed(data, fabric + FAB_SF_MODE); > + do { > + cpu_relax(); > + } while (data != readl_relaxed(fabric + FAB_SF_MODE)); > +} > + > +static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster) > +{ > + unsigned long data; > + void __iomem *sys_dreq, *sys_status; > + > + if (!sysctrl) > + return -ENODEV; > + if (cluster >= HIP04_MAX_CLUSTERS || cpu >= HIP04_MAX_CPUS_PER_CLUSTER) > + return -EINVAL; > + > + spin_lock_irq(&boot_lock); > + > + if (hip04_cpu_table[cluster][cpu]) > + goto out; > + > + sys_dreq = sysctrl + SC_CPU_RESET_DREQ(cluster); > + sys_status = sysctrl + SC_CPU_RESET_STATUS(cluster); > + if (hip04_cluster_is_down(cluster)) { > + data = CLUSTER_DEBUG_RESET_BIT; > + writel_relaxed(data, sys_dreq); > + do { > + cpu_relax(); > + data = readl_relaxed(sys_status); > + } while (data & CLUSTER_DEBUG_RESET_STATUS); > + } > + > + data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \ > + CORE_DEBUG_RESET_BIT(cpu); > + writel_relaxed(data, sys_dreq); > + do { > + cpu_relax(); > + } while (data == readl_relaxed(sys_status)); > + /* > + * We may fail to power up core again without this delay. > + * It's not mentioned in document. It's found by test. > + */ > + udelay(20); > +out: > + hip04_cpu_table[cluster][cpu]++; > + spin_unlock_irq(&boot_lock); > + > + return 0; > +} > + > +static void hip04_mcpm_power_down(void) > +{ > + unsigned int mpidr, cpu, cluster; > + bool skip_wfi = false, last_man = false; > + > + mpidr = read_cpuid_mpidr(); > + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); > + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); > + > + __mcpm_cpu_going_down(cpu, cluster); > + > + spin_lock(&boot_lock); > + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); > + hip04_cpu_table[cluster][cpu]--; > + if (hip04_cpu_table[cluster][cpu] == 1) { > + /* A power_up request went ahead of us. */ > + skip_wfi = true; > + } else if (hip04_cpu_table[cluster][cpu] > 1) { > + pr_err("Cluster %d CPU%d boots multiple times\n", cluster, cpu); > + BUG(); > + } > + > + last_man = hip04_cluster_is_down(cluster); > + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { > + spin_unlock(&boot_lock); > + /* Since it's Cortex A15, disable L2 prefetching. */ > + asm volatile( > + "mcr p15, 1, %0, c15, c0, 3 \n\t" > + "isb \n\t" > + "dsb " > + : : "r" (0x400) ); > + v7_exit_coherency_flush(all); > + hip04_set_snoop_filter(cluster, 0); > + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); > + } else { > + spin_unlock(&boot_lock); > + v7_exit_coherency_flush(louis); > + } > + > + __mcpm_cpu_down(cpu, cluster); > + > + if (!skip_wfi) > + wfi(); > +} > + > +static int hip04_mcpm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) > +{ > + unsigned int data, tries, count; > + int ret = -ETIMEDOUT; > + > + BUG_ON(cluster >= HIP04_MAX_CLUSTERS || > + cpu >= HIP04_MAX_CPUS_PER_CLUSTER); > + > + count = TIMEOUT_MSEC / POLL_MSEC; > + spin_lock_irq(&boot_lock); > + for (tries = 0; tries < count; tries++) { > + if (hip04_cpu_table[cluster][cpu]) { > + ret = -EBUSY; > + goto err; > + } > + cpu_relax(); > + data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster)); > + if (data & CORE_WFI_STATUS(cpu)) > + break; > + spin_unlock_irq(&boot_lock); > + /* Wait for clean L2 when the whole cluster is down. */ > + msleep(POLL_MSEC); > + spin_lock_irq(&boot_lock); > + } > + if (tries >= count) > + goto err; > + data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \ > + CORE_DEBUG_RESET_BIT(cpu); > + writel_relaxed(data, sysctrl + SC_CPU_RESET_REQ(cluster)); > + for (tries = 0; tries < count; tries++) { > + cpu_relax(); > + data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster)); > + if (data & CORE_RESET_STATUS(cpu)) > + break; > + } > + if (tries >= count) > + goto err; > + spin_unlock_irq(&boot_lock); > + return 0; > +err: > + spin_unlock_irq(&boot_lock); > + return ret; > +} > + > +static void hip04_mcpm_powered_up(void) > +{ > + unsigned int mpidr, cpu, cluster; > + > + mpidr = read_cpuid_mpidr(); > + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); > + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); > + > + spin_lock(&boot_lock); > + if (!hip04_cpu_table[cluster][cpu]) > + hip04_cpu_table[cluster][cpu] = 1; > + spin_unlock(&boot_lock); > +} > + > +static void __naked hip04_mcpm_power_up_setup(unsigned int affinity_level) > +{ > + asm volatile (" \n" > +" cmp r0, #0 \n" > +" bxeq lr \n" > + /* calculate fabric phys address */ > +" adr r2, 2f \n" > +" ldmia r2, {r1, r3} \n" > +" sub r0, r2, r1 \n" > +" ldr r2, [r0, r3] \n" > + /* get cluster id from MPIDR */ > +" mrc p15, 0, r0, c0, c0, 5 \n" > +" ubfx r1, r0, #8, #8 \n" > + /* 1 << cluster id */ > +" mov r0, #1 \n" > +" mov r3, r0, lsl r1 \n" > +" ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n" > +" tst r0, r3 \n" > +" bxne lr \n" > +" orr r1, r0, r3 \n" > +" str r1, [r2, #"__stringify(FAB_SF_MODE)"] \n" > +"1: ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n" > +" tst r0, r3 \n" > +" beq 1b \n" > +" bx lr \n" > + > +" .align 2 \n" > +"2: .word . \n" > +" .word fabric_phys_addr \n" > + ); > +} > + > +static const struct mcpm_platform_ops hip04_mcpm_ops = { > + .power_up = hip04_mcpm_power_up, > + .power_down = hip04_mcpm_power_down, > + .wait_for_powerdown = hip04_mcpm_wait_for_powerdown, > + .powered_up = hip04_mcpm_powered_up, > +}; > + > +static bool __init hip04_cpu_table_init(void) > +{ > + unsigned int mpidr, cpu, cluster; > + > + mpidr = read_cpuid_mpidr(); > + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); > + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); > + > + if (cluster >= HIP04_MAX_CLUSTERS || > + cpu >= HIP04_MAX_CPUS_PER_CLUSTER) { > + pr_err("%s: boot CPU is out of bound!\n", __func__); > + return false; > + } > + hip04_set_snoop_filter(cluster, 1); > + hip04_cpu_table[cluster][cpu] = 1; > + return true; > +} > + > +static int __init hip04_mcpm_init(void) > +{ > + struct device_node *np, *np_sctl, *np_fab; > + struct resource fab_res; > + void __iomem *relocation; > + int ret = -ENODEV; > + > + np = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-bootwrapper"); > + if (!np) > + goto err; > + ret = of_property_read_u32_array(np, "boot-method", > + &hip04_boot_method[0], 4); > + if (ret) > + goto err; > + np_sctl = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); > + if (!np_sctl) > + goto err; > + np_fab = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-fabric"); > + if (!np_fab) > + goto err; > + > + ret = memblock_reserve(hip04_boot_method[0], hip04_boot_method[1]); > + if (ret) > + goto err; > + > + relocation = ioremap(hip04_boot_method[2], hip04_boot_method[3]); > + if (!relocation) { > + pr_err("failed to map relocation space\n"); > + ret = -ENOMEM; > + goto err_reloc; > + } > + sysctrl = of_iomap(np_sctl, 0); > + if (!sysctrl) { > + pr_err("failed to get sysctrl base\n"); > + ret = -ENOMEM; > + goto err_sysctrl; > + } > + ret = of_address_to_resource(np_fab, 0, &fab_res); > + if (ret) { > + pr_err("failed to get fabric base phys\n"); > + goto err_fabric; > + } > + fabric_phys_addr = fab_res.start; > + sync_cache_w(&fabric_phys_addr); > + fabric = of_iomap(np_fab, 0); > + if (!fabric) { > + pr_err("failed to get fabric base\n"); > + ret = -ENOMEM; > + goto err_fabric; > + } > + > + if (!hip04_cpu_table_init()) { > + ret = -EINVAL; > + goto err_table; > + } > + ret = mcpm_platform_register(&hip04_mcpm_ops); > + if (ret) { > + goto err_table; > + } > + > + /* > + * Fill the instruction address that is used after secondary core > + * out of reset. > + */ > + writel_relaxed(hip04_boot_method[0], relocation); > + writel_relaxed(0xa5a5a5a5, relocation + 4); /* magic number */ > + writel_relaxed(virt_to_phys(mcpm_entry_point), relocation + 8); > + writel_relaxed(0, relocation + 12); > + iounmap(relocation); > + > + mcpm_sync_init(hip04_mcpm_power_up_setup); > + mcpm_smp_set_ops(); > + pr_info("HiP04 MCPM initialized\n"); > + return ret; > +err_table: > + iounmap(fabric); > +err_fabric: > + iounmap(sysctrl); > +err_sysctrl: > + iounmap(relocation); > +err_reloc: > + memblock_free(hip04_boot_method[0], hip04_boot_method[1]); > +err: > + return ret; > +} > +early_initcall(hip04_mcpm_init); > -- > 1.9.1 > >
diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile index ee2506b..d64831e 100644 --- a/arch/arm/mach-hisi/Makefile +++ b/arch/arm/mach-hisi/Makefile @@ -3,4 +3,5 @@ # obj-y += hisilicon.o +obj-$(CONFIG_MCPM) += platmcpm.o obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c new file mode 100644 index 0000000..280f3f1 --- /dev/null +++ b/arch/arm/mach-hisi/platmcpm.c @@ -0,0 +1,386 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/memblock.h> +#include <linux/of_address.h> + +#include <asm/cputype.h> +#include <asm/cp15.h> +#include <asm/mcpm.h> + +#include "core.h" + +/* bits definition in SC_CPU_RESET_REQ[x]/SC_CPU_RESET_DREQ[x] + * 1 -- unreset; 0 -- reset + */ +#define CORE_RESET_BIT(x) (1 << x) +#define NEON_RESET_BIT(x) (1 << (x + 4)) +#define CORE_DEBUG_RESET_BIT(x) (1 << (x + 9)) +#define CLUSTER_L2_RESET_BIT (1 << 8) +#define CLUSTER_DEBUG_RESET_BIT (1 << 13) + +/* + * bits definition in SC_CPU_RESET_STATUS[x] + * 1 -- reset status; 0 -- unreset status + */ +#define CORE_RESET_STATUS(x) (1 << x) +#define NEON_RESET_STATUS(x) (1 << (x + 4)) +#define CORE_DEBUG_RESET_STATUS(x) (1 << (x + 9)) +#define CLUSTER_L2_RESET_STATUS (1 << 8) +#define CLUSTER_DEBUG_RESET_STATUS (1 << 13) +#define CORE_WFI_STATUS(x) (1 << (x + 16)) +#define CORE_WFE_STATUS(x) (1 << (x + 20)) +#define CORE_DEBUG_ACK(x) (1 << (x + 24)) + +#define SC_CPU_RESET_REQ(x) (0x520 + (x << 3)) /* reset */ +#define SC_CPU_RESET_DREQ(x) (0x524 + (x << 3)) /* unreset */ +#define SC_CPU_RESET_STATUS(x) (0x1520 + (x << 3)) + +#define FAB_SF_MODE 0x0c +#define FAB_SF_INVLD 0x10 + +/* bits definition in FB_SF_INVLD */ +#define FB_SF_INVLD_START (1 << 8) + +#define HIP04_MAX_CLUSTERS 4 +#define HIP04_MAX_CPUS_PER_CLUSTER 4 + +#define POLL_MSEC 10 +#define TIMEOUT_MSEC 1000 + +static void __iomem *sysctrl, *fabric; +static int hip04_cpu_table[HIP04_MAX_CLUSTERS][HIP04_MAX_CPUS_PER_CLUSTER]; +static DEFINE_SPINLOCK(boot_lock); +static u32 fabric_phys_addr; +/* + * [0]: bootwrapper physical address + * [1]: bootwrapper size + * [2]: relocation address + * [3]: relocation size + */ +static u32 hip04_boot_method[4]; + +static bool hip04_cluster_is_down(unsigned int cluster) +{ + int i; + + for (i = 0; i < HIP04_MAX_CPUS_PER_CLUSTER; i++) + if (hip04_cpu_table[cluster][i]) + return false; + return true; +} + +static void hip04_set_snoop_filter(unsigned int cluster, unsigned int on) +{ + unsigned long data; + + if (!fabric) + BUG(); + data = readl_relaxed(fabric + FAB_SF_MODE); + if (on) + data |= 1 << cluster; + else + data &= ~(1 << cluster); + writel_relaxed(data, fabric + FAB_SF_MODE); + do { + cpu_relax(); + } while (data != readl_relaxed(fabric + FAB_SF_MODE)); +} + +static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned long data; + void __iomem *sys_dreq, *sys_status; + + if (!sysctrl) + return -ENODEV; + if (cluster >= HIP04_MAX_CLUSTERS || cpu >= HIP04_MAX_CPUS_PER_CLUSTER) + return -EINVAL; + + spin_lock_irq(&boot_lock); + + if (hip04_cpu_table[cluster][cpu]) + goto out; + + sys_dreq = sysctrl + SC_CPU_RESET_DREQ(cluster); + sys_status = sysctrl + SC_CPU_RESET_STATUS(cluster); + if (hip04_cluster_is_down(cluster)) { + data = CLUSTER_DEBUG_RESET_BIT; + writel_relaxed(data, sys_dreq); + do { + cpu_relax(); + data = readl_relaxed(sys_status); + } while (data & CLUSTER_DEBUG_RESET_STATUS); + } + + data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \ + CORE_DEBUG_RESET_BIT(cpu); + writel_relaxed(data, sys_dreq); + do { + cpu_relax(); + } while (data == readl_relaxed(sys_status)); + /* + * We may fail to power up core again without this delay. + * It's not mentioned in document. It's found by test. + */ + udelay(20); +out: + hip04_cpu_table[cluster][cpu]++; + spin_unlock_irq(&boot_lock); + + return 0; +} + +static void hip04_mcpm_power_down(void) +{ + unsigned int mpidr, cpu, cluster; + bool skip_wfi = false, last_man = false; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + __mcpm_cpu_going_down(cpu, cluster); + + spin_lock(&boot_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + hip04_cpu_table[cluster][cpu]--; + if (hip04_cpu_table[cluster][cpu] == 1) { + /* A power_up request went ahead of us. */ + skip_wfi = true; + } else if (hip04_cpu_table[cluster][cpu] > 1) { + pr_err("Cluster %d CPU%d boots multiple times\n", cluster, cpu); + BUG(); + } + + last_man = hip04_cluster_is_down(cluster); + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + spin_unlock(&boot_lock); + /* Since it's Cortex A15, disable L2 prefetching. */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3 \n\t" + "isb \n\t" + "dsb " + : : "r" (0x400) ); + v7_exit_coherency_flush(all); + hip04_set_snoop_filter(cluster, 0); + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + spin_unlock(&boot_lock); + v7_exit_coherency_flush(louis); + } + + __mcpm_cpu_down(cpu, cluster); + + if (!skip_wfi) + wfi(); +} + +static int hip04_mcpm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) +{ + unsigned int data, tries, count; + int ret = -ETIMEDOUT; + + BUG_ON(cluster >= HIP04_MAX_CLUSTERS || + cpu >= HIP04_MAX_CPUS_PER_CLUSTER); + + count = TIMEOUT_MSEC / POLL_MSEC; + spin_lock_irq(&boot_lock); + for (tries = 0; tries < count; tries++) { + if (hip04_cpu_table[cluster][cpu]) { + ret = -EBUSY; + goto err; + } + cpu_relax(); + data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster)); + if (data & CORE_WFI_STATUS(cpu)) + break; + spin_unlock_irq(&boot_lock); + /* Wait for clean L2 when the whole cluster is down. */ + msleep(POLL_MSEC); + spin_lock_irq(&boot_lock); + } + if (tries >= count) + goto err; + data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \ + CORE_DEBUG_RESET_BIT(cpu); + writel_relaxed(data, sysctrl + SC_CPU_RESET_REQ(cluster)); + for (tries = 0; tries < count; tries++) { + cpu_relax(); + data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster)); + if (data & CORE_RESET_STATUS(cpu)) + break; + } + if (tries >= count) + goto err; + spin_unlock_irq(&boot_lock); + return 0; +err: + spin_unlock_irq(&boot_lock); + return ret; +} + +static void hip04_mcpm_powered_up(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + spin_lock(&boot_lock); + if (!hip04_cpu_table[cluster][cpu]) + hip04_cpu_table[cluster][cpu] = 1; + spin_unlock(&boot_lock); +} + +static void __naked hip04_mcpm_power_up_setup(unsigned int affinity_level) +{ + asm volatile (" \n" +" cmp r0, #0 \n" +" bxeq lr \n" + /* calculate fabric phys address */ +" adr r2, 2f \n" +" ldmia r2, {r1, r3} \n" +" sub r0, r2, r1 \n" +" ldr r2, [r0, r3] \n" + /* get cluster id from MPIDR */ +" mrc p15, 0, r0, c0, c0, 5 \n" +" ubfx r1, r0, #8, #8 \n" + /* 1 << cluster id */ +" mov r0, #1 \n" +" mov r3, r0, lsl r1 \n" +" ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n" +" tst r0, r3 \n" +" bxne lr \n" +" orr r1, r0, r3 \n" +" str r1, [r2, #"__stringify(FAB_SF_MODE)"] \n" +"1: ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n" +" tst r0, r3 \n" +" beq 1b \n" +" bx lr \n" + +" .align 2 \n" +"2: .word . \n" +" .word fabric_phys_addr \n" + ); +} + +static const struct mcpm_platform_ops hip04_mcpm_ops = { + .power_up = hip04_mcpm_power_up, + .power_down = hip04_mcpm_power_down, + .wait_for_powerdown = hip04_mcpm_wait_for_powerdown, + .powered_up = hip04_mcpm_powered_up, +}; + +static bool __init hip04_cpu_table_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + if (cluster >= HIP04_MAX_CLUSTERS || + cpu >= HIP04_MAX_CPUS_PER_CLUSTER) { + pr_err("%s: boot CPU is out of bound!\n", __func__); + return false; + } + hip04_set_snoop_filter(cluster, 1); + hip04_cpu_table[cluster][cpu] = 1; + return true; +} + +static int __init hip04_mcpm_init(void) +{ + struct device_node *np, *np_sctl, *np_fab; + struct resource fab_res; + void __iomem *relocation; + int ret = -ENODEV; + + np = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-bootwrapper"); + if (!np) + goto err; + ret = of_property_read_u32_array(np, "boot-method", + &hip04_boot_method[0], 4); + if (ret) + goto err; + np_sctl = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); + if (!np_sctl) + goto err; + np_fab = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-fabric"); + if (!np_fab) + goto err; + + ret = memblock_reserve(hip04_boot_method[0], hip04_boot_method[1]); + if (ret) + goto err; + + relocation = ioremap(hip04_boot_method[2], hip04_boot_method[3]); + if (!relocation) { + pr_err("failed to map relocation space\n"); + ret = -ENOMEM; + goto err_reloc; + } + sysctrl = of_iomap(np_sctl, 0); + if (!sysctrl) { + pr_err("failed to get sysctrl base\n"); + ret = -ENOMEM; + goto err_sysctrl; + } + ret = of_address_to_resource(np_fab, 0, &fab_res); + if (ret) { + pr_err("failed to get fabric base phys\n"); + goto err_fabric; + } + fabric_phys_addr = fab_res.start; + sync_cache_w(&fabric_phys_addr); + fabric = of_iomap(np_fab, 0); + if (!fabric) { + pr_err("failed to get fabric base\n"); + ret = -ENOMEM; + goto err_fabric; + } + + if (!hip04_cpu_table_init()) { + ret = -EINVAL; + goto err_table; + } + ret = mcpm_platform_register(&hip04_mcpm_ops); + if (ret) { + goto err_table; + } + + /* + * Fill the instruction address that is used after secondary core + * out of reset. + */ + writel_relaxed(hip04_boot_method[0], relocation); + writel_relaxed(0xa5a5a5a5, relocation + 4); /* magic number */ + writel_relaxed(virt_to_phys(mcpm_entry_point), relocation + 8); + writel_relaxed(0, relocation + 12); + iounmap(relocation); + + mcpm_sync_init(hip04_mcpm_power_up_setup); + mcpm_smp_set_ops(); + pr_info("HiP04 MCPM initialized\n"); + return ret; +err_table: + iounmap(fabric); +err_fabric: + iounmap(sysctrl); +err_sysctrl: + iounmap(relocation); +err_reloc: + memblock_free(hip04_boot_method[0], hip04_boot_method[1]); +err: + return ret; +} +early_initcall(hip04_mcpm_init);
Multiple CPU clusters are used in Hisilicon HiP04 SoC. Now use MCPM framework to manage power on HiP04 SoC. Changelog: v20: * Disable L2 prefetch when the whole cluster is down. * Move disabling snoop filter into power_down() after L2 prefetch disabled. * Remove delay in wait_for_power_down() after L2 prefetch disabled. * Add the sleep polling in wait_for_power_down() again since we need to wait L2 when the cluster is down. v19: * Add comments on those delay hacks. * Update on checking core enabled counts in wait_for_power_down(). v18: * Fix to release resource in probe(). * Check whether cpu is already up in the process of making cpu down. * Add udelay in power up/down sequence. * Optimize on setting relocation entry. * Optimize on polling status in wait_for_power_down(). * Add mcpm critical operations. v17: * Parse bootwrapper parameters in DTS file. * Fix to use msleep() in spinlock region. v16: * Parse bootwrapper parameters in command line instead. v13: * Restore power down operation in MCPM. * Fix disabling snoop filter issue in MCPM. v12: * Use wfi as power down state in MCPM. * Remove wait_for_powerdown() in MCPM because wfi is used now. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- arch/arm/mach-hisi/Makefile | 1 + arch/arm/mach-hisi/platmcpm.c | 386 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 387 insertions(+) create mode 100644 arch/arm/mach-hisi/platmcpm.c