@@ -348,6 +348,13 @@ choice
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on KEYSTONE2 devices.
+ config DEBUG_KS8695_UART
+ bool "KS8695 Debug UART"
+ depends on ARCH_KS8695
+ help
+ Say Y here if you want kernel low-level debugging support
+ on KS8695.
+
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
depends on ARCH_MMP
@@ -1017,6 +1024,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART
+ default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
new file mode 100644
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/include/debug/ks8695.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Debug macros
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define KS8695_UART_PA 0x03ffe000
+#define KS8695_UART_VA 0xf00fe000
+#define KS8695_URTH (0x04)
+#define KS8695_URLS (0x14)
+#define URLS_URTE (1 << 6)
+#define URLS_URTHRE (1 << 5)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =KS8695_UART_PA @ physical base address
+ ldr \rv, =KS8695_UART_VA @ virtual base address
+ .endm
+
+ .macro senduart, rd, rx
+ str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register
+ .endm
+
+ .macro busyuart, rd, rx
+1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
+ tst \rd, #URLS_URTE @ Holding & Shift registers empty?
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
+ tst \rd, #URLS_URTHRE @ Holding Register empty?
+ beq 1001b
+ .endm
deleted file mode 100644
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/debug-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Debug macros
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <mach/hardware.h>
-#include <mach/regs-uart.h>
-
- .macro addruart, rp, rv, tmp
- ldr \rp, =KS8695_UART_PA @ physical base address
- ldr \rv, =KS8695_UART_VA @ virtual base address
- .endm
-
- .macro senduart, rd, rx
- str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register
- .endm
-
- .macro busyuart, rd, rx
-1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
- tst \rd, #URLS_URTE @ Holding & Shift registers empty?
- beq 1001b
- .endm
-
- .macro waituart, rd, rx
-1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
- tst \rd, #URLS_URTHRE @ Holding Register empty?
- beq 1001b
- .endm
As part of the migration a couple of uart definitions have been copied from of the platform specific header files. Note that, in order to keep oldconfig working nicely we must defer the removal of arch/arm/mach-ks8695/include/mach/debug-macro.S until DEBUG_LL_UART_NONE has been removed. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> --- arch/arm/Kconfig.debug | 8 +++++ arch/arm/include/debug/ks8695.S | 40 +++++++++++++++++++++++++ arch/arm/mach-ks8695/include/mach/debug-macro.S | 36 ---------------------- 3 files changed, 48 insertions(+), 36 deletions(-) create mode 100644 arch/arm/include/debug/ks8695.S delete mode 100644 arch/arm/mach-ks8695/include/mach/debug-macro.S