@@ -21,6 +21,7 @@
reg = <0>;
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
+ cpu-idle-states = <&CPU_SPC>;
};
CPU1: cpu@1 {
@@ -30,6 +31,7 @@
reg = <1>;
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
+ cpu-idle-states = <&CPU_SPC>;
};
CPU2: cpu@2 {
@@ -39,6 +41,7 @@
reg = <2>;
next-level-cache = <&L2>;
qcom,acc = <&acc2>;
+ cpu-idle-states = <&CPU_SPC>;
};
CPU3: cpu@3 {
@@ -48,6 +51,7 @@
reg = <3>;
next-level-cache = <&L2>;
qcom,acc = <&acc3>;
+ cpu-idle-states = <&CPU_SPC>;
};
L2: l2-cache {
@@ -55,6 +59,16 @@
cache-level = <2>;
qcom,saw = <&saw_l2>;
};
+
+ idle-states {
+ CPU_SPC: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ entry-latency-us = <150>;
+ exit-latency-us = <200>;
+ min-residency-us = <2000>;
+ entry-method = "standalone-pc";
+ };
+ };
};
cpu-pmu {
Add allowable C-States for each cpu using the cpu-idle-states node. ARM spec dictates WFI as the default idle state at 0. Support standalone power collapse (power down that does not affect any SoC idle states) for each cpu. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)