@@ -240,15 +240,10 @@ static void imx7_csi_hw_enable_irq(struct imx7_csi *csi)
{
u32 cr1 = imx7_csi_reg_read(csi, CSI_CSICR1);
- cr1 |= BIT_SOF_INTEN;
cr1 |= BIT_RFF_OR_INT;
-
- /* still capture needs DMA interrupt */
cr1 |= BIT_FB1_DMA_DONE_INTEN;
cr1 |= BIT_FB2_DMA_DONE_INTEN;
- cr1 |= BIT_EOF_INT_EN;
-
imx7_csi_reg_write(csi, cr1, CSI_CSICR1);
}
@@ -256,11 +251,9 @@ static void imx7_csi_hw_disable_irq(struct imx7_csi *csi)
{
u32 cr1 = imx7_csi_reg_read(csi, CSI_CSICR1);
- cr1 &= ~BIT_SOF_INTEN;
cr1 &= ~BIT_RFF_OR_INT;
cr1 &= ~BIT_FB1_DMA_DONE_INTEN;
cr1 &= ~BIT_FB2_DMA_DONE_INTEN;
- cr1 &= ~BIT_EOF_INT_EN;
imx7_csi_reg_write(csi, cr1, CSI_CSICR1);
}
@@ -322,17 +315,6 @@ static void imx7_csi_dmareq_rff_disable(struct imx7_csi *csi)
imx7_csi_reg_write(csi, cr3, CSI_CSICR3);
}
-static void imx7_csi_sw_reset(struct imx7_csi *csi)
-{
- imx7_csi_rx_fifo_clear(csi);
-
- imx7_csi_dma_reflash(csi);
-
- usleep_range(2000, 3000);
-
- imx7_csi_irq_clear(csi);
-}
-
static void imx7_csi_update_buf(struct imx7_csi *csi, dma_addr_t phys,
int buf_num)
{
@@ -559,10 +541,18 @@ static void imx7_csi_deinit(struct imx7_csi *csi)
static void imx7_csi_enable(struct imx7_csi *csi)
{
- imx7_csi_sw_reset(csi);
+ /* Clear the Rx FIFO and reflash the DMA controller. */
+ imx7_csi_rx_fifo_clear(csi);
+ imx7_csi_dma_reflash(csi);
- imx7_csi_dmareq_rff_enable(csi);
+ usleep_range(2000, 3000);
+
+ /* Clear and enable the interrupts. */
+ imx7_csi_irq_clear(csi);
imx7_csi_hw_enable_irq(csi);
+
+ /* Enable the RxFIFO DMA and the CSI. */
+ imx7_csi_dmareq_rff_enable(csi);
imx7_csi_hw_enable(csi);
}
The SOF and EOF interrupts are not used. Don't enable them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/staging/media/imx/imx7-media-csi.c | 30 ++++++++-------------- 1 file changed, 10 insertions(+), 20 deletions(-)