| Message ID | 20210106134251.45264-3-martin.blumenstingl@googlemail.com |
|---|---|
| State | New |
| Headers | show |
| Series | dwmac-meson8b: picosecond precision RX delay support | expand |
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c index f184b00f5116..5f500141567d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c @@ -301,7 +301,7 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac) return -EINVAL; } - if (rx_dly_config & PRG_ETH0_ADJ_ENABLE) { + if (delay_config & PRG_ETH0_ADJ_ENABLE) { if (!dwmac->timing_adj_clk) { dev_err(dwmac->dev, "The timing-adjustment clock is mandatory for the RX delay re-timing\n");
The timing-adjustment clock only has to be enabled when a) there is a 2ns RX delay configured using device-tree and b) the phy-mode indicates that the RX delay should be enabled. Only enable the RX delay if both are true, instead of (by accident) also enabling it when there's the 2ns RX delay configured but the phy-mode incicates that the RX delay is not used. Fixes: 9308c47640d515 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration") Reported-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)