Message ID | 20210112181441.206545-4-sukadev@linux.ibm.com |
---|---|
State | New |
Headers | show |
Series | ibmvnic: Use more consistent locking | expand |
Saeed Mahameed [saeed@kernel.org] wrote: > > -struct ibmvnic_rwi { > > - enum ibmvnic_reset_reason reset_reason; > > - struct list_head list; > > -}; > > + VNIC_RESET_CHANGE_PARAM, > > + VNIC_RESET_MAX}; // must be last > this is not the preferred comment style: ^^ > > I would just drop the comment here, it is clear from the name of the > enum. > Yeah, we debated and figured the comment could serve as another reminder. Here is updated patch, fixing the comment style. Thanks Sukadev --- From 59d4b23fe1f97a67436e14829368744ee288157d Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Date: Wed, 16 Dec 2020 23:00:34 -0600 Subject: [PATCH net-next v2 3/7] ibmvnic: avoid allocating rwi entries Whenever we need to schedule a reset, we allocate an rwi (reset work item?) entry and add to the list of pending resets. Since we only add one rwi for a given reason type to the list (no duplicates). we will only have a handful of reset types in the list - even in the worst case. In the common case we should just have a couple of entries at most. Rather than allocating/freeing every time (and dealing with the corner case of the allocation failing), use a fixed number of rwi entries. The extra memory needed is tiny and most of it will be used over the active life of the adapter. This also fixes a couple of tiny memory leaks. One is in ibmvnic_reset() where we don't free the rwi entries after deleting them from the list due to a transport event. The second is in __ibmvnic_reset() where if we find that the adapter is being removed, we simply break out of the loop (with rc = EBUSY) but ignore any rwi entries that remain on the list. Fixes: 2770a7984db58 ("Introduce hard reset recovery") Fixes: 36f1031c51a2 ("ibmvnic: Do not process reset during or after device removal") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> --- drivers/net/ethernet/ibm/ibmvnic.c | 123 +++++++++++++++++------------ drivers/net/ethernet/ibm/ibmvnic.h | 14 ++-- 2 files changed, 78 insertions(+), 59 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index cd8108dbddec..d1c2aaed1478 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2257,29 +2257,81 @@ static int do_hard_reset(struct ibmvnic_adapter *adapter, return rc; } -static struct ibmvnic_rwi *get_next_rwi(struct ibmvnic_adapter *adapter) +/** + * Next reset will always be the first on the list. + * When we take it off the list, we move any remaining resets so + * that the next one is again the first on the list. Most of the + * time the pending_resets[] should have a couple of types of resets + * (FAILOVER, TIMEOUT or CHANGE-PARAM and less often, MOBILITY). + */ +static enum ibmvnic_reset_reason get_pending_reset(struct ibmvnic_adapter *adapter) { - struct ibmvnic_rwi *rwi; + enum ibmvnic_reset_reason *pending_resets; + enum ibmvnic_reset_reason reason = 0; unsigned long flags; + int i; spin_lock_irqsave(&adapter->rwi_lock, flags); - if (!list_empty(&adapter->rwi_list)) { - rwi = list_first_entry(&adapter->rwi_list, struct ibmvnic_rwi, - list); - list_del(&rwi->list); - } else { - rwi = NULL; + pending_resets = &adapter->pending_resets[0]; + + reason = pending_resets[0]; + + if (reason) { + for (i = 0; i < adapter->next_reset; i++) { + pending_resets[i] = pending_resets[i+1]; + if (!pending_resets[i]) + break; + } + adapter->next_reset--; + } + + spin_unlock_irqrestore(&adapter->rwi_lock, flags); + return reason; +} + +/** + * Add a pending reset, making sure not to add duplicates. + * If @clear is set, clear all existing resets before adding. + * + * TODO: If clear (i.e force_reset_recovery) is true AND we have a + * duplicate reset, wouldn't it still make sense to clear the + * queue including the duplicate and add this reset? Preserving + * existing behavior for now. + */ +static void add_pending_reset(struct ibmvnic_adapter *adapter, + enum ibmvnic_reset_reason reason, + bool clear) +{ + enum ibmvnic_reset_reason *pending_resets; + unsigned long flags; + int i; + + spin_lock_irqsave(&adapter->rwi_lock, flags); + + pending_resets = &adapter->pending_resets[0]; + + for (i = 0; i < adapter->next_reset; i++) { + if (pending_resets[i] == reason) + goto out; + } + + if (clear) { + for (i = 0; i < adapter->next_reset; i++) { + pending_resets[i] = 0; + } + adapter->next_reset = 0; } + pending_resets[adapter->next_reset] = reason; + adapter->next_reset++; +out: spin_unlock_irqrestore(&adapter->rwi_lock, flags); - return rwi; } static void __ibmvnic_reset(struct work_struct *work) { enum ibmvnic_reset_reason reason; - struct ibmvnic_rwi *rwi; struct ibmvnic_adapter *adapter; bool saved_state = false; unsigned long flags; @@ -2294,15 +2346,13 @@ static void __ibmvnic_reset(struct work_struct *work) return; } - rwi = get_next_rwi(adapter); - reason = rwi->reset_reason; - while (rwi) { + reason = get_pending_reset(adapter); + while (reason) { spin_lock_irqsave(&adapter->state_lock, flags); if (adapter->state == VNIC_REMOVING || adapter->state == VNIC_REMOVED) { spin_unlock_irqrestore(&adapter->state_lock, flags); - kfree(rwi); rc = EBUSY; break; } @@ -2347,14 +2397,12 @@ static void __ibmvnic_reset(struct work_struct *work) adapter->from_passive_init)) { rc = do_reset(adapter, reason, reset_state); } - kfree(rwi); adapter->last_reset_time = jiffies; if (rc) netdev_dbg(adapter->netdev, "Reset failed, rc=%d\n", rc); - rwi = get_next_rwi(adapter); - reason = rwi->reset_reason; + reason = get_pending_reset(adapter); if (reason && (reason == VNIC_RESET_FAILOVER || reason == VNIC_RESET_MOBILITY)) @@ -2386,17 +2434,14 @@ static void __ibmvnic_delayed_reset(struct work_struct *work) static int ibmvnic_reset(struct ibmvnic_adapter *adapter, enum ibmvnic_reset_reason reason) { - struct list_head *entry, *tmp_entry; - struct ibmvnic_rwi *rwi, *tmp; struct net_device *netdev = adapter->netdev; - unsigned long flags; int ret; /* * If failover is pending don't schedule any other reset. * Instead let the failover complete. If there is already a * a failover reset scheduled, we will detect and drop the - * duplicate reset when walking the ->rwi_list below. + * duplicate reset when walking the ->pending_resets list. */ if (adapter->state == VNIC_REMOVING || adapter->state == VNIC_REMOVED || @@ -2412,36 +2457,11 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter, goto err; } - spin_lock_irqsave(&adapter->rwi_lock, flags); - - list_for_each(entry, &adapter->rwi_list) { - tmp = list_entry(entry, struct ibmvnic_rwi, list); - if (tmp->reset_reason == reason) { - netdev_dbg(netdev, "Skipping matching reset, reason=%d\n", - reason); - spin_unlock_irqrestore(&adapter->rwi_lock, flags); - ret = EBUSY; - goto err; - } - } - - rwi = kzalloc(sizeof(*rwi), GFP_ATOMIC); - if (!rwi) { - spin_unlock_irqrestore(&adapter->rwi_lock, flags); - ibmvnic_close(netdev); - ret = ENOMEM; - goto err; - } - /* if we just received a transport event, - * flush reset queue and process this reset + /* If we just received a transport event, clear + * any pending resets and add just this reset. */ - if (adapter->force_reset_recovery && !list_empty(&adapter->rwi_list)) { - list_for_each_safe(entry, tmp_entry, &adapter->rwi_list) - list_del(entry); - } - rwi->reset_reason = reason; - list_add_tail(&rwi->list, &adapter->rwi_list); - spin_unlock_irqrestore(&adapter->rwi_lock, flags); + add_pending_reset(adapter, reason, adapter->force_reset_recovery); + netdev_dbg(adapter->netdev, "Scheduling reset (reason %d)\n", reason); schedule_work(&adapter->ibmvnic_reset); @@ -5363,7 +5383,8 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) INIT_WORK(&adapter->ibmvnic_reset, __ibmvnic_reset); INIT_DELAYED_WORK(&adapter->ibmvnic_delayed_reset, __ibmvnic_delayed_reset); - INIT_LIST_HEAD(&adapter->rwi_list); + adapter->next_reset = 0; + memset(&adapter->pending_resets, 0, sizeof(adapter->pending_resets)); spin_lock_init(&adapter->rwi_lock); spin_lock_init(&adapter->state_lock); mutex_init(&adapter->fw_lock); diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index c09c3f6bba9f..1179a95a3f92 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -945,17 +945,14 @@ enum vnic_state {VNIC_PROBING = 1, VNIC_REMOVING, VNIC_REMOVED}; -enum ibmvnic_reset_reason {VNIC_RESET_FAILOVER = 1, +enum ibmvnic_reset_reason {VNIC_RESET_UNUSED = 0, + VNIC_RESET_FAILOVER = 1, VNIC_RESET_MOBILITY, VNIC_RESET_FATAL, VNIC_RESET_NON_FATAL, VNIC_RESET_TIMEOUT, - VNIC_RESET_CHANGE_PARAM}; - -struct ibmvnic_rwi { - enum ibmvnic_reset_reason reset_reason; - struct list_head list; -}; + VNIC_RESET_CHANGE_PARAM, + VNIC_RESET_MAX}; /* must be last */ struct ibmvnic_tunables { u64 rx_queues; @@ -1082,7 +1079,8 @@ struct ibmvnic_adapter { enum vnic_state state; enum ibmvnic_reset_reason reset_reason; spinlock_t rwi_lock; - struct list_head rwi_list; + enum ibmvnic_reset_reason pending_resets[VNIC_RESET_MAX-1]; + short next_reset; struct work_struct ibmvnic_reset; struct delayed_work ibmvnic_delayed_reset; unsigned long resetting; -- 2.26.2
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index cd8108dbddec..d1c2aaed1478 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2257,29 +2257,81 @@ static int do_hard_reset(struct ibmvnic_adapter *adapter, return rc; } -static struct ibmvnic_rwi *get_next_rwi(struct ibmvnic_adapter *adapter) +/** + * Next reset will always be the first on the list. + * When we take it off the list, we move any remaining resets so + * that the next one is again the first on the list. Most of the + * time the pending_resets[] should have a couple of types of resets + * (FAILOVER, TIMEOUT or CHANGE-PARAM and less often, MOBILITY). + */ +static enum ibmvnic_reset_reason get_pending_reset(struct ibmvnic_adapter *adapter) { - struct ibmvnic_rwi *rwi; + enum ibmvnic_reset_reason *pending_resets; + enum ibmvnic_reset_reason reason = 0; unsigned long flags; + int i; spin_lock_irqsave(&adapter->rwi_lock, flags); - if (!list_empty(&adapter->rwi_list)) { - rwi = list_first_entry(&adapter->rwi_list, struct ibmvnic_rwi, - list); - list_del(&rwi->list); - } else { - rwi = NULL; + pending_resets = &adapter->pending_resets[0]; + + reason = pending_resets[0]; + + if (reason) { + for (i = 0; i < adapter->next_reset; i++) { + pending_resets[i] = pending_resets[i+1]; + if (!pending_resets[i]) + break; + } + adapter->next_reset--; + } + + spin_unlock_irqrestore(&adapter->rwi_lock, flags); + return reason; +} + +/** + * Add a pending reset, making sure not to add duplicates. + * If @clear is set, clear all existing resets before adding. + * + * TODO: If clear (i.e force_reset_recovery) is true AND we have a + * duplicate reset, wouldn't it still make sense to clear the + * queue including the duplicate and add this reset? Preserving + * existing behavior for now. + */ +static void add_pending_reset(struct ibmvnic_adapter *adapter, + enum ibmvnic_reset_reason reason, + bool clear) +{ + enum ibmvnic_reset_reason *pending_resets; + unsigned long flags; + int i; + + spin_lock_irqsave(&adapter->rwi_lock, flags); + + pending_resets = &adapter->pending_resets[0]; + + for (i = 0; i < adapter->next_reset; i++) { + if (pending_resets[i] == reason) + goto out; + } + + if (clear) { + for (i = 0; i < adapter->next_reset; i++) { + pending_resets[i] = 0; + } + adapter->next_reset = 0; } + pending_resets[adapter->next_reset] = reason; + adapter->next_reset++; +out: spin_unlock_irqrestore(&adapter->rwi_lock, flags); - return rwi; } static void __ibmvnic_reset(struct work_struct *work) { enum ibmvnic_reset_reason reason; - struct ibmvnic_rwi *rwi; struct ibmvnic_adapter *adapter; bool saved_state = false; unsigned long flags; @@ -2294,15 +2346,13 @@ static void __ibmvnic_reset(struct work_struct *work) return; } - rwi = get_next_rwi(adapter); - reason = rwi->reset_reason; - while (rwi) { + reason = get_pending_reset(adapter); + while (reason) { spin_lock_irqsave(&adapter->state_lock, flags); if (adapter->state == VNIC_REMOVING || adapter->state == VNIC_REMOVED) { spin_unlock_irqrestore(&adapter->state_lock, flags); - kfree(rwi); rc = EBUSY; break; } @@ -2347,14 +2397,12 @@ static void __ibmvnic_reset(struct work_struct *work) adapter->from_passive_init)) { rc = do_reset(adapter, reason, reset_state); } - kfree(rwi); adapter->last_reset_time = jiffies; if (rc) netdev_dbg(adapter->netdev, "Reset failed, rc=%d\n", rc); - rwi = get_next_rwi(adapter); - reason = rwi->reset_reason; + reason = get_pending_reset(adapter); if (reason && (reason == VNIC_RESET_FAILOVER || reason == VNIC_RESET_MOBILITY)) @@ -2386,17 +2434,14 @@ static void __ibmvnic_delayed_reset(struct work_struct *work) static int ibmvnic_reset(struct ibmvnic_adapter *adapter, enum ibmvnic_reset_reason reason) { - struct list_head *entry, *tmp_entry; - struct ibmvnic_rwi *rwi, *tmp; struct net_device *netdev = adapter->netdev; - unsigned long flags; int ret; /* * If failover is pending don't schedule any other reset. * Instead let the failover complete. If there is already a * a failover reset scheduled, we will detect and drop the - * duplicate reset when walking the ->rwi_list below. + * duplicate reset when walking the ->pending_resets list. */ if (adapter->state == VNIC_REMOVING || adapter->state == VNIC_REMOVED || @@ -2412,36 +2457,11 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter, goto err; } - spin_lock_irqsave(&adapter->rwi_lock, flags); - - list_for_each(entry, &adapter->rwi_list) { - tmp = list_entry(entry, struct ibmvnic_rwi, list); - if (tmp->reset_reason == reason) { - netdev_dbg(netdev, "Skipping matching reset, reason=%d\n", - reason); - spin_unlock_irqrestore(&adapter->rwi_lock, flags); - ret = EBUSY; - goto err; - } - } - - rwi = kzalloc(sizeof(*rwi), GFP_ATOMIC); - if (!rwi) { - spin_unlock_irqrestore(&adapter->rwi_lock, flags); - ibmvnic_close(netdev); - ret = ENOMEM; - goto err; - } - /* if we just received a transport event, - * flush reset queue and process this reset + /* If we just received a transport event, clear + * any pending resets and add just this reset. */ - if (adapter->force_reset_recovery && !list_empty(&adapter->rwi_list)) { - list_for_each_safe(entry, tmp_entry, &adapter->rwi_list) - list_del(entry); - } - rwi->reset_reason = reason; - list_add_tail(&rwi->list, &adapter->rwi_list); - spin_unlock_irqrestore(&adapter->rwi_lock, flags); + add_pending_reset(adapter, reason, adapter->force_reset_recovery); + netdev_dbg(adapter->netdev, "Scheduling reset (reason %d)\n", reason); schedule_work(&adapter->ibmvnic_reset); @@ -5363,7 +5383,8 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) INIT_WORK(&adapter->ibmvnic_reset, __ibmvnic_reset); INIT_DELAYED_WORK(&adapter->ibmvnic_delayed_reset, __ibmvnic_delayed_reset); - INIT_LIST_HEAD(&adapter->rwi_list); + adapter->next_reset = 0; + memset(&adapter->pending_resets, 0, sizeof(adapter->pending_resets)); spin_lock_init(&adapter->rwi_lock); spin_lock_init(&adapter->state_lock); mutex_init(&adapter->fw_lock); diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index c09c3f6bba9f..1179a95a3f92 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -945,17 +945,14 @@ enum vnic_state {VNIC_PROBING = 1, VNIC_REMOVING, VNIC_REMOVED}; -enum ibmvnic_reset_reason {VNIC_RESET_FAILOVER = 1, +enum ibmvnic_reset_reason {VNIC_RESET_UNUSED = 0, + VNIC_RESET_FAILOVER = 1, VNIC_RESET_MOBILITY, VNIC_RESET_FATAL, VNIC_RESET_NON_FATAL, VNIC_RESET_TIMEOUT, - VNIC_RESET_CHANGE_PARAM}; - -struct ibmvnic_rwi { - enum ibmvnic_reset_reason reset_reason; - struct list_head list; -}; + VNIC_RESET_CHANGE_PARAM, + VNIC_RESET_MAX}; // must be last struct ibmvnic_tunables { u64 rx_queues; @@ -1082,7 +1079,8 @@ struct ibmvnic_adapter { enum vnic_state state; enum ibmvnic_reset_reason reset_reason; spinlock_t rwi_lock; - struct list_head rwi_list; + enum ibmvnic_reset_reason pending_resets[VNIC_RESET_MAX-1]; + short next_reset; struct work_struct ibmvnic_reset; struct delayed_work ibmvnic_delayed_reset; unsigned long resetting;
Whenever we need to schedule a reset, we allocate an rwi (reset work item?) entry and add to the list of pending resets. Since we only add one rwi for a given reason type to the list (no duplicates). we will only have a handful of reset types in the list - even in the worst case. In the common case we should just have a couple of entries at most. Rather than allocating/freeing every time (and dealing with the corner case of the allocation failing), use a fixed number of rwi entries. The extra memory needed is tiny and most of it will be used over the active life of the adapter. This also fixes a couple of tiny memory leaks. One is in ibmvnic_reset() where we don't free the rwi entries after deleting them from the list due to a transport event. The second is in __ibmvnic_reset() where if we find that the adapter is being removed, we simply break out of the loop (with rc = EBUSY) but ignore any rwi entries that remain on the list. Fixes: 2770a7984db58 ("Introduce hard reset recovery") Fixes: 36f1031c51a2 ("ibmvnic: Do not process reset during or after device removal") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> --- drivers/net/ethernet/ibm/ibmvnic.c | 123 +++++++++++++++++------------ drivers/net/ethernet/ibm/ibmvnic.h | 14 ++-- 2 files changed, 78 insertions(+), 59 deletions(-)