@@ -4,6 +4,7 @@
obj-y := clock.o cpu.o devices.o devices-common.o \
id.o usb.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
new file mode 100644
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/hardware.h>
+#include <mach/id.h>
+
+static void __iomem *l2x0_base;
+
+static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
+{
+ /* wait for the operation to complete */
+ while (readl_relaxed(reg) & mask)
+ cpu_relax();
+}
+
+static inline void ux500_cache_sync(void)
+{
+ writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC);
+ ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1);
+}
+
+/*
+ * The L2 cache cannot be turned off in the non-secure world.
+ * Dummy until a secure service is in place.
+ */
+static void ux500_l2x0_disable(void)
+{
+}
+
+/*
+ * This is only called when doing a kexec, just after turning off the L2
+ * and L1 cache, and it is surrounded by a spinlock in the generic version.
+ * However, we're not really turning off the L2 cache right now and the
+ * PL310 does not support exclusive accesses (used to implement the spinlock).
+ * So, the invalidation needs to be done without the spinlock.
+ */
+static void ux500_l2x0_inv_all(void)
+{
+ uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
+
+ /* invalidate all ways */
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+ ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ ux500_cache_sync();
+}
+
+static int ux500_l2x0_init(void)
+{
+ if (cpu_is_u5500())
+ l2x0_base = __io_address(U5500_L2CC_BASE);
+ else if (cpu_is_u8500())
+ l2x0_base = __io_address(U8500_L2CC_BASE);
+ else
+ ux500_unknown_soc();
+
+ /* 64KB way size, 8 way associativity, force WA */
+ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+
+ /* Override invalidate function */
+ outer_cache.disable = ux500_l2x0_disable;
+ outer_cache.inv_all = ux500_l2x0_inv_all;
+
+ return 0;
+}
+
+early_initcall(ux500_l2x0_init);
@@ -11,8 +11,6 @@
#include <linux/mfd/db8500-prcmu.h>
#include <linux/mfd/db5500-prcmu.h>
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/localtimer.h>
@@ -26,10 +24,6 @@
void __iomem *_PRCMU_BASE;
-#ifdef CONFIG_CACHE_L2X0
-static void __iomem *l2x0_base;
-#endif
-
void __init ux500_init_irq(void)
{
void __iomem *dist_base;
@@ -57,69 +51,6 @@ void __init ux500_init_irq(void)
clk_init();
}
-#ifdef CONFIG_CACHE_L2X0
-static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
-{
- /* wait for the operation to complete */
- while (readl_relaxed(reg) & mask)
- cpu_relax();
-}
-
-static inline void ux500_cache_sync(void)
-{
- void __iomem *base = l2x0_base;
-
- writel_relaxed(0, base + L2X0_CACHE_SYNC);
- ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
-}
-
-/*
- * The L2 cache cannot be turned off in the non-secure world.
- * Dummy until a secure service is in place.
- */
-static void ux500_l2x0_disable(void)
-{
-}
-
-/*
- * This is only called when doing a kexec, just after turning off the L2
- * and L1 cache, and it is surrounded by a spinlock in the generic version.
- * However, we're not really turning off the L2 cache right now and the
- * PL310 does not support exclusive accesses (used to implement the spinlock).
- * So, the invalidation needs to be done without the spinlock.
- */
-static void ux500_l2x0_inv_all(void)
-{
- void __iomem *base = l2x0_base;
- uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
-
- /* invalidate all ways */
- writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
- ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
- ux500_cache_sync();
-}
-
-static int ux500_l2x0_init(void)
-{
- if (cpu_is_u5500())
- l2x0_base = __io_address(U5500_L2CC_BASE);
- else if (cpu_is_u8500())
- l2x0_base = __io_address(U8500_L2CC_BASE);
- else
- ux500_unknown_soc();
-
- /* 64KB way size, 8 way associativity, force WA */
- l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
-
- /* Override invalidate function */
- outer_cache.disable = ux500_l2x0_disable;
- outer_cache.inv_all = ux500_l2x0_inv_all;
-
- return 0;
-}
-early_initcall(ux500_l2x0_init);
-#endif
-
static void __init ux500_timer_init(void)
{
#ifdef CONFIG_LOCAL_TIMERS