diff mbox

ARM: i.MX: initialize l2x0 at early_init time

Message ID 1314189941-16406-1-git-send-email-jason.hui@linaro.org
State Superseded
Headers show

Commit Message

Jason Hui Aug. 24, 2011, 12:45 p.m. UTC 
This can make the l2 cache work at early time which
will benefit the boot up time.

Tested on i.mx31pdk board, test result shows:
Before:
[    0.555716] console [ttymxc0] enabled

After:
[    0.558755] console [ttymxc0] enabled

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/cache-l2x0.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Comments

Arnaud Patard (Rtp) Aug. 24, 2011, 1:21 p.m. UTC | #1 
Jason Liu <jason.hui@linaro.org> writes:

> This can make the l2 cache work at early time which
> will benefit the boot up time.
>
> Tested on i.mx31pdk board, test result shows:
> Before:
> [    0.555716] console [ttymxc0] enabled
>
> After:
> [    0.558755] console [ttymxc0] enabled

0.555716-0.558755 is negative, so it's slower with the patch ?

Sorry :)

Arnaud
Jason Liu Aug. 26, 2011, 2:34 a.m. UTC | #2 
Hi, Arnaud,

2011/8/24 Arnaud Patard <arnaud.patard@rtp-net.org>:
> Jason Liu <jason.hui@linaro.org> writes:
>
>> This can make the l2 cache work at early time which
>> will benefit the boot up time.
>>
>> Tested on i.mx31pdk board, test result shows:
>> Before:
>> [    0.555716] console [ttymxc0] enabled
>>
>> After:
>> [    0.558755] console [ttymxc0] enabled
>
> 0.555716-0.558755 is negative, so it's slower with the patch ?
>
> Sorry :)

Sorry, the commit log has some error, here is the test result:

Before: arch_initcall(mxc_init_l2x0);

[    0.000000] Linux version 3.1.0-rc3-00006-gaa94168-dirty
(r64343@r64343-desktop) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1
-203) ) #6 PREEMPT Wed Aug 24 20:27:59 CST 2011
[    0.000000] CPU: ARMv6-compatible processor [4107b364] revision 4
(ARMv6TEJ), cr=00c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing
instruction cache
[    0.000000] Machine: Freescale MX31PDK (3DS)
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 30464
[    0.000000] Kernel command line: noinitrd console=ttymxc0,115200
root=/dev/mtdblock2 rw ip=off
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 120MB = 120MB total
[    0.000000] Memory: 117708k/117708k available, 13364k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xf4000000   ( 696 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc038e724   (3610 kB)
[    0.000000]       .init : 0xc038f000 - 0xc03ad000   ( 120 kB)
[    0.000000]       .data : 0xc03ae000 - 0xc03d77a0   ( 166 kB)
[    0.000000]        .bss : 0xc03d77c4 - 0xc03e9498   (  72 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:404
[    0.000000] MXC IRQ initialized
[    0.000000] Clock input source is 26000000
[    0.000000] CPU identified as i.MX31, silicon rev 2.8
[    0.000000] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps
every 64585ms
[    0.000244] Calibrating delay loop... 531.66 BogoMIPS (lpj=2658304)
[    0.050233] pid_max: default: 32768 minimum: 301
[    0.050778] Mount-cache hash table entries: 512
[    0.051712] CPU: Testing write buffer coherency: ok
[    0.055422] print_constraints: dummy:
[    0.055827] NET: Registered protocol family 16
[    0.059721] 3-Stack Debug board detected, rev = 0x0200
[    0.061429] L210 cache controller enabled
[    0.061462] l2x0: 8 ways, CACHE_ID 0x41000040, AUX_CTRL 0x00030024,
Cache size: 131072 B
[    0.065331] bio: create slab <bio-0> at 0
[    0.071137] Switching to clocksource mxc_timer1
[    0.072724] NET: Registered protocol family 2
[    0.073146] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.074338] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.074492] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.074593] TCP: Hash tables configured (established 4096 bind 4096)
[    0.074612] TCP reno registered
[    0.074633] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.074673] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.075086] NET: Registered protocol family 1
[    0.075806] RPC: Registered named UNIX socket transport module.
[    0.075832] RPC: Registered udp transport module.
[    0.075848] RPC: Registered tcp transport module.
[    0.075864] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.080406] Switched to NOHz mode on CPU #0
[    0.082045] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.082709] msgmni has been set to 229
[    0.082948] io scheduler noop registered
[    0.082968] io scheduler deadline registered
[    0.083108] io scheduler cfq registered (default)
[    0.211233] mx3_sdc_fb mx3_sdc_fb: registered, using mode Epson-VGA
[    0.212623] Serial: IMX driver
[    0.212815] imx21-uart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a IMX
[    0.558755] console [ttymxc0] enabled

...

After: early_initcall(mxc_init_l2x0);

[    0.000000] Linux version 3.1.0-rc3-00006-gaa94168-dirty
(r64343@r64343-desktop) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1
-203) ) #5 PREEMPT Wed Aug 24 20:26:24 CST 2011
[    0.000000] CPU: ARMv6-compatible processor [4107b364] revision 4
(ARMv6TEJ), cr=00c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing
instruction cache
[    0.000000] Machine: Freescale MX31PDK (3DS)
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 30464
[    0.000000] Kernel command line: noinitrd console=ttymxc0,115200
root=/dev/mtdblock2 rw ip=off
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 120MB = 120MB total
[    0.000000] Memory: 117708k/117708k available, 13364k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
[    0.000000]     vmalloc : 0xc8800000 - 0xf4000000   ( 696 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc038e724   (3610 kB)
[    0.000000]       .init : 0xc038f000 - 0xc03ad000   ( 120 kB)
[    0.000000]       .data : 0xc03ae000 - 0xc03d77a0   ( 166 kB)
[    0.000000]        .bss : 0xc03d77c4 - 0xc03e9498   (  72 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:404
[    0.000000] MXC IRQ initialized
[    0.000000] Clock input source is 26000000
[    0.000000] CPU identified as i.MX31, silicon rev 2.8
[    0.000000] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps
every 64585ms
[    0.000244] Calibrating delay loop... 531.66 BogoMIPS (lpj=2658304)
[    0.050233] pid_max: default: 32768 minimum: 301
[    0.050782] Mount-cache hash table entries: 512
[    0.051715] CPU: Testing write buffer coherency: ok
[    0.052159] L210 cache controller enabled
[    0.052195] l2x0: 8 ways, CACHE_ID 0x41000040, AUX_CTRL 0x00030024,
Cache size: 131072 B
[    0.054546] print_constraints: dummy:
[    0.054810] NET: Registered protocol family 16
[    0.057539] 3-Stack Debug board detected, rev = 0x0200
[    0.062335] bio: create slab <bio-0> at 0
[    0.068090] Switching to clocksource mxc_timer1
[    0.069667] NET: Registered protocol family 2
[    0.070093] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070262] Switched to NOHz mode on CPU #0
[    0.071452] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.071608] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.071708] TCP: Hash tables configured (established 4096 bind 4096)
[    0.071728] TCP reno registered
[    0.071749] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.071789] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.072201] NET: Registered protocol family 1
[    0.072924] RPC: Registered named UNIX socket transport module.
[    0.072949] RPC: Registered udp transport module.
[    0.072965] RPC: Registered tcp transport module.
[    0.072981] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.079071] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.079742] msgmni has been set to 229
[    0.079982] io scheduler noop registered
[    0.080001] io scheduler deadline registered
[    0.080139] io scheduler cfq registered (default)
[    0.208186] mx3_sdc_fb mx3_sdc_fb: registered, using mode Epson-VGA
[    0.209581] Serial: IMX driver
[    0.209770] imx21-uart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a IMX
[    0.555716] console [ttymxc0] enabled


I will send out one updated version.

Jason


>
> Arnaud
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
diff mbox

Patch

diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c
index 69d1322..e5538a4 100644
--- a/arch/arm/mach-imx/cache-l2x0.c
+++ b/arch/arm/mach-imx/cache-l2x0.c
@@ -53,4 +53,4 @@  static int mxc_init_l2x0(void)
 
 	return 0;
 }
-arch_initcall(mxc_init_l2x0);
+early_initcall(mxc_init_l2x0);