diff mbox series

[net-next,v3,1/8] ethtool: Add support for configuring frame preemption

Message ID 20210122224453.4161729-2-vinicius.gomes@intel.com
State New
Headers show
Series [net-next,v3,1/8] ethtool: Add support for configuring frame preemption | expand

Commit Message

Vinicius Costa Gomes Jan. 22, 2021, 10:44 p.m. UTC
Frame preemption (described in IEEE 802.3br-2016) defines the concept
of preemptible and express queues. It allows traffic from express
queues to "interrupt" traffic from preemptible queues, which are
"resumed" after the express traffic has finished transmitting.

Frame preemption can only be used when both the local device and the
link partner support it.

Only parameters for enabling/disabling frame preemption and
configuring the minimum fragment size are included here. Expressing
which queues are marked as preemptible is left to mqprio/taprio, as
having that information there should be easier on the user.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
---
 Documentation/networking/ethtool-netlink.rst |  38 +++++
 include/linux/ethtool.h                      |  23 ++-
 include/uapi/linux/ethtool_netlink.h         |  17 +++
 net/ethtool/Makefile                         |   2 +-
 net/ethtool/common.c                         |  25 ++++
 net/ethtool/netlink.c                        |  19 +++
 net/ethtool/netlink.h                        |   4 +
 net/ethtool/preempt.c                        | 146 +++++++++++++++++++
 8 files changed, 272 insertions(+), 2 deletions(-)
 create mode 100644 net/ethtool/preempt.c

Comments

Vladimir Oltean March 2, 2021, 2:23 p.m. UTC | #1
Hi Vinicius,

On Fri, Jan 22, 2021 at 02:44:46PM -0800, Vinicius Costa Gomes wrote:
> Frame preemption (described in IEEE 802.3br-2016) defines the concept
> of preemptible and express queues. It allows traffic from express
> queues to "interrupt" traffic from preemptible queues, which are
> "resumed" after the express traffic has finished transmitting.
> 
> Frame preemption can only be used when both the local device and the
> link partner support it.
> 
> Only parameters for enabling/disabling frame preemption and
> configuring the minimum fragment size are included here. Expressing
> which queues are marked as preemptible is left to mqprio/taprio, as
> having that information there should be easier on the user.
> 
> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
> ---

I just noticed that the aMACMergeStatusVerify variable is not exposed in
the PREEMPT_GET command, which would allow the user to inspect the state
of the MAC merge sublayer verification state machine. Also, a way in the
PREEMPT_SET command to set the disableVerify variable would be nice.

Do you still have the iproute2 patch that goes along with this? If you
don't have the time, I might try to take a stab at adding these extra
parameters and resending.
Vinicius Costa Gomes March 3, 2021, 12:40 a.m. UTC | #2
Hi Vladimir,

Vladimir Oltean <olteanv@gmail.com> writes:

> Hi Vinicius,

>

> On Fri, Jan 22, 2021 at 02:44:46PM -0800, Vinicius Costa Gomes wrote:

>> Frame preemption (described in IEEE 802.3br-2016) defines the concept

>> of preemptible and express queues. It allows traffic from express

>> queues to "interrupt" traffic from preemptible queues, which are

>> "resumed" after the express traffic has finished transmitting.

>> 

>> Frame preemption can only be used when both the local device and the

>> link partner support it.

>> 

>> Only parameters for enabling/disabling frame preemption and

>> configuring the minimum fragment size are included here. Expressing

>> which queues are marked as preemptible is left to mqprio/taprio, as

>> having that information there should be easier on the user.

>> 

>> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>

>> ---

>

> I just noticed that the aMACMergeStatusVerify variable is not exposed in

> the PREEMPT_GET command, which would allow the user to inspect the state

> of the MAC merge sublayer verification state machine. Also, a way in the

> PREEMPT_SET command to set the disableVerify variable would be nice.

>


The hardware I have won't have support for this.

I am going to send the next version of this series soon. Care to send
the support for verifyStatus/disableVerify as follow up series?


Cheers,
-- 
Vinicius
Vladimir Oltean March 3, 2021, 12:51 a.m. UTC | #3
On Tue, Mar 02, 2021 at 04:40:55PM -0800, Vinicius Costa Gomes wrote:
> Hi Vladimir,

>

> Vladimir Oltean <olteanv@gmail.com> writes:

>

> > Hi Vinicius,

> >

> > On Fri, Jan 22, 2021 at 02:44:46PM -0800, Vinicius Costa Gomes wrote:

> >> Frame preemption (described in IEEE 802.3br-2016) defines the concept

> >> of preemptible and express queues. It allows traffic from express

> >> queues to "interrupt" traffic from preemptible queues, which are

> >> "resumed" after the express traffic has finished transmitting.

> >>

> >> Frame preemption can only be used when both the local device and the

> >> link partner support it.

> >>

> >> Only parameters for enabling/disabling frame preemption and

> >> configuring the minimum fragment size are included here. Expressing

> >> which queues are marked as preemptible is left to mqprio/taprio, as

> >> having that information there should be easier on the user.

> >>

> >> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>

> >> ---

> >

> > I just noticed that the aMACMergeStatusVerify variable is not exposed in

> > the PREEMPT_GET command, which would allow the user to inspect the state

> > of the MAC merge sublayer verification state machine. Also, a way in the

> > PREEMPT_SET command to set the disableVerify variable would be nice.

> >

>

> The hardware I have won't have support for this.


What exactly is not supported, FP verification or the disabling of it?
Does your hardware at least respond to verification frames?

> I am going to send the next version of this series soon. Care to send

> the support for verifyStatus/disableVerify as follow up series?
Vinicius Costa Gomes March 5, 2021, 10:38 p.m. UTC | #4
Vladimir Oltean <olteanv@gmail.com> writes:

> On Tue, Mar 02, 2021 at 04:40:55PM -0800, Vinicius Costa Gomes wrote:

>> Hi Vladimir,

>>

>> Vladimir Oltean <olteanv@gmail.com> writes:

>>

>> > Hi Vinicius,

>> >

>> > On Fri, Jan 22, 2021 at 02:44:46PM -0800, Vinicius Costa Gomes wrote:

>> >> Frame preemption (described in IEEE 802.3br-2016) defines the concept

>> >> of preemptible and express queues. It allows traffic from express

>> >> queues to "interrupt" traffic from preemptible queues, which are

>> >> "resumed" after the express traffic has finished transmitting.

>> >>

>> >> Frame preemption can only be used when both the local device and the

>> >> link partner support it.

>> >>

>> >> Only parameters for enabling/disabling frame preemption and

>> >> configuring the minimum fragment size are included here. Expressing

>> >> which queues are marked as preemptible is left to mqprio/taprio, as

>> >> having that information there should be easier on the user.

>> >>

>> >> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>

>> >> ---

>> >

>> > I just noticed that the aMACMergeStatusVerify variable is not exposed in

>> > the PREEMPT_GET command, which would allow the user to inspect the state

>> > of the MAC merge sublayer verification state machine. Also, a way in the

>> > PREEMPT_SET command to set the disableVerify variable would be nice.

>> >

>>

>> The hardware I have won't have support for this.

>

> What exactly is not supported, FP verification or the disabling of it?

> Does your hardware at least respond to verification frames?

>


Not supported in the sense that the NIC doesn't expose those variables
into registers.

About the behavior, I am asking our hardware folks.


Cheers,
-- 
Vinicius
diff mbox series

Patch

diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 30b98245979f..339310aa7595 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1279,6 +1279,44 @@  Kernel response contents:
 For UDP tunnel table empty ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` indicates that
 the table contains static entries, hard-coded by the NIC.
 
+PREEMPT_GET
+===========
+
+Get information about frame preemption state.
+
+Request contents:
+
+  ====================================  ======  ==========================
+  ``ETHTOOL_A_PREEMPT_HEADER``          nested  request header
+  ====================================  ======  ==========================
+
+Kernel response contents:
+
+  =====================================  ======  ==========================
+  ``ETHTOOL_A_PREEMPT_HEADER``           nested  reply header
+  ``ETHTOOL_A_PREEMPT_ENABLED``          u8      frame preemption enabled
+  ``ETHTOOL_A_PREEMPT_ADD_FRAG_SIZE``    u32     Min additional frag size
+  =====================================  ======  ==========================
+
+``ETHTOOL_A_PREEMPT_ADD_FRAG_SIZE`` configures the minimum non-final
+fragment size that the receiver device supports.
+
+PREEMPT_SET
+============
+
+Sets frame preemption parameters.
+
+Request contents:
+
+  =====================================  ======  ==========================
+  ``ETHTOOL_A_CHANNELS_HEADER``          nested  reply header
+  ``ETHTOOL_A_PREEMPT_ENABLED``          u8      frame preemption enabled
+  ``ETHTOOL_A_PREEMPT_ADD_FRAG_SIZE``    u32     Min additional frag size
+  =====================================  ======  ==========================
+
+``ETHTOOL_A_PREEMPT_ADD_FRAG_SIZE`` configures the minimum non-final
+fragment size that the receiver device supports.
+
 Request translation
 ===================
 
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index e3da25b51ae4..f14ddb22285d 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -81,6 +81,7 @@  enum {
 #define ETH_RSS_HASH_NO_CHANGE	0
 
 struct net_device;
+struct netlink_ext_ack;
 
 /* Some generic methods drivers may use in their ethtool_ops */
 u32 ethtool_op_get_link(struct net_device *dev);
@@ -263,6 +264,19 @@  struct ethtool_pause_stats {
 	u64 rx_pause_frames;
 };
 
+/**
+ * struct ethtool_fp - Frame Preemption information
+ *
+ * @enabled: Enable frame preemption.
+ * @add_frag_size: Minimum size for additional (non-final) fragments
+ * in bytes, for the value defined in the IEEE 802.3-2018 standard see
+ * ethtool_frag_size_to_mult().
+ */
+struct ethtool_fp {
+	u8 enabled;
+	u32 add_frag_size;
+};
+
 /**
  * struct ethtool_ops - optional netdev operations
  * @supported_coalesce_params: supported types of interrupt coalescing.
@@ -406,6 +420,8 @@  struct ethtool_pause_stats {
  * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
  *	This is only useful if the device maintains PHY statistics and
  *	cannot use the standard PHY library helpers.
+ * @get_preempt: Get the network device Frame Preemption parameters.
+ * @set_preempt: Set the network device Frame Preemption parameters.
  *
  * All operations are optional (i.e. the function pointer may be set
  * to %NULL) and callers must take this into account.  Callers must
@@ -504,6 +520,10 @@  struct ethtool_ops {
 				      struct ethtool_fecparam *);
 	int	(*set_fecparam)(struct net_device *,
 				      struct ethtool_fecparam *);
+	int	(*get_preempt)(struct net_device *,
+			       struct ethtool_fp *);
+	int	(*set_preempt)(struct net_device *, struct ethtool_fp *,
+			       struct netlink_ext_ack *);
 	void	(*get_ethtool_phy_stats)(struct net_device *,
 					 struct ethtool_stats *, u64 *);
 	int	(*get_phy_tunable)(struct net_device *,
@@ -533,7 +553,6 @@  int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
 				       const struct ethtool_link_ksettings *cmd,
 				       u32 *dev_speed, u8 *dev_duplex);
 
-struct netlink_ext_ack;
 struct phy_device;
 struct phy_tdr_config;
 
@@ -566,4 +585,6 @@  struct ethtool_phy_ops {
  */
 void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops);
 
+u8 ethtool_frag_size_to_mult(u32 frag_size);
+
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index e2bf36e6964b..bd7a722dc13a 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -42,6 +42,8 @@  enum {
 	ETHTOOL_MSG_CABLE_TEST_ACT,
 	ETHTOOL_MSG_CABLE_TEST_TDR_ACT,
 	ETHTOOL_MSG_TUNNEL_INFO_GET,
+	ETHTOOL_MSG_PREEMPT_GET,
+	ETHTOOL_MSG_PREEMPT_SET,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -80,6 +82,8 @@  enum {
 	ETHTOOL_MSG_CABLE_TEST_NTF,
 	ETHTOOL_MSG_CABLE_TEST_TDR_NTF,
 	ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY,
+	ETHTOOL_MSG_PREEMPT_GET_REPLY,
+	ETHTOOL_MSG_PREEMPT_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -628,6 +632,19 @@  enum {
 	ETHTOOL_A_TUNNEL_INFO_MAX = (__ETHTOOL_A_TUNNEL_INFO_CNT - 1)
 };
 
+/* FRAME PREEMPTION */
+
+enum {
+	ETHTOOL_A_PREEMPT_UNSPEC,
+	ETHTOOL_A_PREEMPT_HEADER,			/* nest - _A_HEADER_* */
+	ETHTOOL_A_PREEMPT_ENABLED,			/* u8 */
+	ETHTOOL_A_PREEMPT_ADD_FRAG_SIZE,		/* u32 */
+
+	/* add new constants above here */
+	__ETHTOOL_A_PREEMPT_CNT,
+	ETHTOOL_A_PREEMPT_MAX = (__ETHTOOL_A_PREEMPT_CNT - 1)
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1
diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile
index 7a849ff22dad..4e584903e3ef 100644
--- a/net/ethtool/Makefile
+++ b/net/ethtool/Makefile
@@ -7,4 +7,4 @@  obj-$(CONFIG_ETHTOOL_NETLINK)	+= ethtool_nl.o
 ethtool_nl-y	:= netlink.o bitset.o strset.o linkinfo.o linkmodes.o \
 		   linkstate.o debug.o wol.o features.o privflags.o rings.o \
 		   channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \
-		   tunnels.o
+		   tunnels.o preempt.o
diff --git a/net/ethtool/common.c b/net/ethtool/common.c
index 24036e3055a1..9206d6b4f858 100644
--- a/net/ethtool/common.c
+++ b/net/ethtool/common.c
@@ -410,3 +410,28 @@  void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops)
 	rtnl_unlock();
 }
 EXPORT_SYMBOL_GPL(ethtool_set_ethtool_phy_ops);
+
+/**
+ * ethtool_frag_size_to_mult() - Convert from a Frame Preemption
+ * Additional Fragment size in bytes to a multiplier.
+ * @frag_size: minimum non-final fragment size in bytes.
+ *
+ * The multiplier is defined as:
+ *	"A 2-bit integer value used to indicate the minimum size of
+ *	non-final fragments supported by the receiver on the given port
+ *	associated with the local System. This value is expressed in units
+ *	of 64 octets of additional fragment length."
+ *	Equivalent to `30.14.1.7 aMACMergeAddFragSize` from the IEEE 802.3-2018
+ *	standard.
+ *
+ * Return: the multiplier is a number in the [0, 2] interval.
+ */
+u8 ethtool_frag_size_to_mult(u32 frag_size)
+{
+	u8 mult = (frag_size / 64) - 1;
+
+	mult = clamp_t(u8, mult, 0, 3);
+
+	return mult;
+}
+EXPORT_SYMBOL_GPL(ethtool_frag_size_to_mult);
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index 50d3c8896f91..bc7d66e3ba38 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -245,6 +245,7 @@  ethnl_default_requests[__ETHTOOL_MSG_USER_CNT] = {
 	[ETHTOOL_MSG_PAUSE_GET]		= &ethnl_pause_request_ops,
 	[ETHTOOL_MSG_EEE_GET]		= &ethnl_eee_request_ops,
 	[ETHTOOL_MSG_TSINFO_GET]	= &ethnl_tsinfo_request_ops,
+	[ETHTOOL_MSG_PREEMPT_GET]	= &ethnl_preempt_request_ops,
 };
 
 static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb)
@@ -551,6 +552,7 @@  ethnl_default_notify_ops[ETHTOOL_MSG_KERNEL_MAX + 1] = {
 	[ETHTOOL_MSG_COALESCE_NTF]	= &ethnl_coalesce_request_ops,
 	[ETHTOOL_MSG_PAUSE_NTF]		= &ethnl_pause_request_ops,
 	[ETHTOOL_MSG_EEE_NTF]		= &ethnl_eee_request_ops,
+	[ETHTOOL_MSG_PREEMPT_NTF]	= &ethnl_preempt_request_ops,
 };
 
 /* default notification handler */
@@ -643,6 +645,7 @@  static const ethnl_notify_handler_t ethnl_notify_handlers[] = {
 	[ETHTOOL_MSG_COALESCE_NTF]	= ethnl_default_notify,
 	[ETHTOOL_MSG_PAUSE_NTF]		= ethnl_default_notify,
 	[ETHTOOL_MSG_EEE_NTF]		= ethnl_default_notify,
+	[ETHTOOL_MSG_PREEMPT_NTF]	= ethnl_default_notify,
 };
 
 void ethtool_notify(struct net_device *dev, unsigned int cmd, const void *data)
@@ -912,6 +915,22 @@  static const struct genl_ops ethtool_genl_ops[] = {
 		.policy = ethnl_tunnel_info_get_policy,
 		.maxattr = ARRAY_SIZE(ethnl_tunnel_info_get_policy) - 1,
 	},
+	{
+		.cmd	= ETHTOOL_MSG_PREEMPT_GET,
+		.doit	= ethnl_default_doit,
+		.start	= ethnl_default_start,
+		.dumpit	= ethnl_default_dumpit,
+		.done	= ethnl_default_done,
+		.policy = ethnl_preempt_get_policy,
+		.maxattr = ARRAY_SIZE(ethnl_preempt_get_policy) - 1,
+	},
+	{
+		.cmd	= ETHTOOL_MSG_PREEMPT_SET,
+		.flags	= GENL_UNS_ADMIN_PERM,
+		.doit	= ethnl_set_preempt,
+		.policy = ethnl_preempt_set_policy,
+		.maxattr = ARRAY_SIZE(ethnl_preempt_set_policy) - 1,
+	},
 };
 
 static const struct genl_multicast_group ethtool_nl_mcgrps[] = {
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index d8efec516d86..53d2e722fad3 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -344,6 +344,7 @@  extern const struct ethnl_request_ops ethnl_coalesce_request_ops;
 extern const struct ethnl_request_ops ethnl_pause_request_ops;
 extern const struct ethnl_request_ops ethnl_eee_request_ops;
 extern const struct ethnl_request_ops ethnl_tsinfo_request_ops;
+extern const struct ethnl_request_ops ethnl_preempt_request_ops;
 
 extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1];
 extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1];
@@ -375,6 +376,8 @@  extern const struct nla_policy ethnl_tsinfo_get_policy[ETHTOOL_A_TSINFO_HEADER +
 extern const struct nla_policy ethnl_cable_test_act_policy[ETHTOOL_A_CABLE_TEST_HEADER + 1];
 extern const struct nla_policy ethnl_cable_test_tdr_act_policy[ETHTOOL_A_CABLE_TEST_TDR_CFG + 1];
 extern const struct nla_policy ethnl_tunnel_info_get_policy[ETHTOOL_A_TUNNEL_INFO_HEADER + 1];
+extern const struct nla_policy ethnl_preempt_get_policy[ETHTOOL_A_PREEMPT_HEADER + 1];
+extern const struct nla_policy ethnl_preempt_set_policy[ETHTOOL_A_PREEMPT_ADD_FRAG_SIZE + 1];
 
 int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info);
 int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info);
@@ -392,5 +395,6 @@  int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info);
 int ethnl_tunnel_info_doit(struct sk_buff *skb, struct genl_info *info);
 int ethnl_tunnel_info_start(struct netlink_callback *cb);
 int ethnl_tunnel_info_dumpit(struct sk_buff *skb, struct netlink_callback *cb);
+int ethnl_set_preempt(struct sk_buff *skb, struct genl_info *info);
 
 #endif /* _NET_ETHTOOL_NETLINK_H */
diff --git a/net/ethtool/preempt.c b/net/ethtool/preempt.c
new file mode 100644
index 000000000000..4f96d3c2b1d5
--- /dev/null
+++ b/net/ethtool/preempt.c
@@ -0,0 +1,146 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "netlink.h"
+#include "common.h"
+
+struct preempt_req_info {
+	struct ethnl_req_info		base;
+};
+
+struct preempt_reply_data {
+	struct ethnl_reply_data		base;
+	struct ethtool_fp		fp;
+};
+
+#define PREEMPT_REPDATA(__reply_base) \
+	container_of(__reply_base, struct preempt_reply_data, base)
+
+const struct nla_policy
+ethnl_preempt_get_policy[] = {
+	[ETHTOOL_A_PREEMPT_HEADER]		= NLA_POLICY_NESTED(ethnl_header_policy),
+};
+
+static int preempt_prepare_data(const struct ethnl_req_info *req_base,
+				struct ethnl_reply_data *reply_base,
+				struct genl_info *info)
+{
+	struct preempt_reply_data *data = PREEMPT_REPDATA(reply_base);
+	struct net_device *dev = reply_base->dev;
+	int ret;
+
+	if (!dev->ethtool_ops->get_preempt)
+		return -EOPNOTSUPP;
+
+	ret = ethnl_ops_begin(dev);
+	if (ret < 0)
+		return ret;
+
+	ret = dev->ethtool_ops->get_preempt(dev, &data->fp);
+	ethnl_ops_complete(dev);
+
+	return ret;
+}
+
+static int preempt_reply_size(const struct ethnl_req_info *req_base,
+			      const struct ethnl_reply_data *reply_base)
+{
+	int len = 0;
+
+	len += nla_total_size(sizeof(u8)); /* _PREEMPT_ENABLED */
+	len += nla_total_size(sizeof(u32)); /* _PREEMPT_ADD_FRAG_SIZE */
+
+	return len;
+}
+
+static int preempt_fill_reply(struct sk_buff *skb,
+			      const struct ethnl_req_info *req_base,
+			      const struct ethnl_reply_data *reply_base)
+{
+	const struct preempt_reply_data *data = PREEMPT_REPDATA(reply_base);
+	const struct ethtool_fp *preempt = &data->fp;
+
+	if (nla_put_u8(skb, ETHTOOL_A_PREEMPT_ENABLED, preempt->enabled))
+		return -EMSGSIZE;
+
+	if (nla_put_u32(skb, ETHTOOL_A_PREEMPT_ADD_FRAG_SIZE,
+			preempt->add_frag_size))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+const struct ethnl_request_ops ethnl_preempt_request_ops = {
+	.request_cmd		= ETHTOOL_MSG_PREEMPT_GET,
+	.reply_cmd		= ETHTOOL_MSG_PREEMPT_GET_REPLY,
+	.hdr_attr		= ETHTOOL_A_PREEMPT_HEADER,
+	.req_info_size		= sizeof(struct preempt_req_info),
+	.reply_data_size	= sizeof(struct preempt_reply_data),
+
+	.prepare_data		= preempt_prepare_data,
+	.reply_size		= preempt_reply_size,
+	.fill_reply		= preempt_fill_reply,
+};
+
+const struct nla_policy
+ethnl_preempt_set_policy[ETHTOOL_A_PREEMPT_MAX + 1] = {
+	[ETHTOOL_A_PREEMPT_HEADER]			= NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PREEMPT_ENABLED]			= NLA_POLICY_RANGE(NLA_U8, 0, 1),
+	[ETHTOOL_A_PREEMPT_ADD_FRAG_SIZE]		= { .type = NLA_U32 },
+};
+
+int ethnl_set_preempt(struct sk_buff *skb, struct genl_info *info)
+{
+	struct ethnl_req_info req_info = {};
+	struct nlattr **tb = info->attrs;
+	struct ethtool_fp preempt = {};
+	struct net_device *dev;
+	bool mod = false;
+	int ret;
+
+	ret = ethnl_parse_header_dev_get(&req_info,
+					 tb[ETHTOOL_A_PREEMPT_HEADER],
+					 genl_info_net(info), info->extack,
+					 true);
+	if (ret < 0)
+		return ret;
+	dev = req_info.dev;
+	ret = -EOPNOTSUPP;
+	if (!dev->ethtool_ops->get_preempt ||
+	    !dev->ethtool_ops->set_preempt)
+		goto out_dev;
+
+	rtnl_lock();
+	ret = ethnl_ops_begin(dev);
+	if (ret < 0)
+		goto out_rtnl;
+
+	ret = dev->ethtool_ops->get_preempt(dev, &preempt);
+	if (ret < 0) {
+		GENL_SET_ERR_MSG(info, "failed to retrieve frame preemption settings");
+		goto out_ops;
+	}
+
+	ethnl_update_u8(&preempt.enabled,
+			tb[ETHTOOL_A_PREEMPT_ENABLED], &mod);
+	ethnl_update_u32(&preempt.add_frag_size,
+			 tb[ETHTOOL_A_PREEMPT_ADD_FRAG_SIZE], &mod);
+	ret = 0;
+	if (!mod)
+		goto out_ops;
+
+	ret = dev->ethtool_ops->set_preempt(dev, &preempt, info->extack);
+	if (ret < 0) {
+		GENL_SET_ERR_MSG(info, "frame preemption settings update failed");
+		goto out_ops;
+	}
+
+	ethtool_notify(dev, ETHTOOL_MSG_PREEMPT_NTF, NULL);
+
+out_ops:
+	ethnl_ops_complete(dev);
+out_rtnl:
+	rtnl_unlock();
+out_dev:
+	dev_put(dev);
+	return ret;
+}