diff mbox series

[net-next,08/15] bnxt_en: attempt to reinitialize after aborted reset

Message ID 1611558501-11022-9-git-send-email-michael.chan@broadcom.com
State New
Headers show
Series bnxt_en: Error recovery improvements. | expand

Commit Message

Michael Chan Jan. 25, 2021, 7:08 a.m. UTC 
From: Edwin Peer <edwin.peer@broadcom.com>

Drawing a hard line on aborted resets prevents a NIC open in
some scenarios that may otherwise be recoverable. For example,
if a firmware recovery happened while a PF was down and an
attempt was made to bring up an associated VF in this state,
then it was impossible to ever bring up this VF without a
rebind or reload of its driver.

Attempt to reinitialize the firmware when an aborted reset (or
failed init after a reset) is discovered during open - it may
succeed. Also take care to allow the user to retry opening the
NIC even after an aborted reset.

Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 29 +++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index c8c25f7644ae..7f30a9fee0c8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -9768,6 +9768,25 @@  static void bnxt_preset_reg_win(struct bnxt *bp)
 
 static int bnxt_init_dflt_ring_mode(struct bnxt *bp);
 
+static int bnxt_reinit_after_abort(struct bnxt *bp)
+{
+	int rc;
+
+	if (test_bit(BNXT_STATE_IN_FW_RESET, &bp->state))
+		return -EBUSY;
+
+	rc = bnxt_fw_init_one(bp);
+	if (!rc) {
+		bnxt_clear_int_mode(bp);
+		rc = bnxt_init_int_mode(bp);
+		if (!rc) {
+			clear_bit(BNXT_STATE_ABORT_ERR, &bp->state);
+			set_bit(BNXT_STATE_FW_RESET_DET, &bp->state);
+		}
+	}
+	return rc;
+}
+
 static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init)
 {
 	int rc = 0;
@@ -9926,8 +9945,14 @@  static int bnxt_open(struct net_device *dev)
 	int rc;
 
 	if (test_bit(BNXT_STATE_ABORT_ERR, &bp->state)) {
-		netdev_err(bp->dev, "A previous firmware reset did not complete, aborting\n");
-		return -ENODEV;
+		rc = bnxt_reinit_after_abort(bp);
+		if (rc) {
+			if (rc == -EBUSY)
+				netdev_err(bp->dev, "A previous firmware reset has not completed, aborting\n");
+			else
+				netdev_err(bp->dev, "Failed to reinitialize after aborted firmware reset\n");
+			return -ENODEV;
+		}
 	}
 
 	rc = bnxt_hwrm_if_change(bp, true);