diff mbox series

[v3,3/4] dmaengine: rcar-dmac: Add helpers for clearing DMA channel status

Message ID 20210128084455.2237256-4-geert+renesas@glider.be
State Accepted
Commit 245bbd16b72cffe86d9216b26ac182bf850bec2b
Headers show
Series dmaengine: rcar-dmac: Add support for R-Car V3U | expand

Commit Message

Geert Uytterhoeven Jan. 28, 2021, 8:44 a.m. UTC 
Extract the code to clear the status of one or all channels into their
own helpers, to prepare for the different handling of the R-Car V3U SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
v3:
  - Add Reviewed-by, Tested-by,

v2:
  - No changes.
---
 drivers/dma/sh/rcar-dmac.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 83c9a5bd1077db3a..37e3c6890f8670da 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -336,6 +336,17 @@  static void rcar_dmac_chan_write(struct rcar_dmac_chan *chan, u32 reg, u32 data)
 		writel(data, chan->iomem + reg);
 }
 
+static void rcar_dmac_chan_clear(struct rcar_dmac *dmac,
+				 struct rcar_dmac_chan *chan)
+{
+	rcar_dmac_write(dmac, RCAR_DMACHCLR, BIT(chan->index));
+}
+
+static void rcar_dmac_chan_clear_all(struct rcar_dmac *dmac)
+{
+	rcar_dmac_write(dmac, RCAR_DMACHCLR, dmac->channels_mask);
+}
+
 /* -----------------------------------------------------------------------------
  * Initialization and configuration
  */
@@ -451,7 +462,7 @@  static int rcar_dmac_init(struct rcar_dmac *dmac)
 	u16 dmaor;
 
 	/* Clear all channels and enable the DMAC globally. */
-	rcar_dmac_write(dmac, RCAR_DMACHCLR, dmac->channels_mask);
+	rcar_dmac_chan_clear_all(dmac);
 	rcar_dmac_write(dmac, RCAR_DMAOR,
 			RCAR_DMAOR_PRI_FIXED | RCAR_DMAOR_DME);
 
@@ -1566,7 +1577,7 @@  static irqreturn_t rcar_dmac_isr_channel(int irq, void *dev)
 		 * because channel is already stopped in error case.
 		 * We need to clear register and check DE bit as recovery.
 		 */
-		rcar_dmac_write(dmac, RCAR_DMACHCLR, 1 << chan->index);
+		rcar_dmac_chan_clear(dmac, chan);
 		rcar_dmac_chcr_de_barrier(chan);
 		reinit = true;
 		goto spin_lock_end;