diff mbox series

[v2,net-next,3/3] octeontx2-af: Handle CPT function level reset

Message ID 20210202152709.20450-4-schalla@marvell.com
State New
Headers show
Series Support for OcteonTX2 98xx CPT block. | expand

Commit Message

Srujana Challa Feb. 2, 2021, 3:27 p.m. UTC 
When FLR is initiated for a VF (PCI function level reset),
the parent PF gets a interrupt. PF then sends a message to
admin function (AF), which then cleans up all resources
attached to that VF. This patch adds support to handle
CPT FLR.

Signed-off-by: Narayana Prasad Raju Atherya <pathreya@marvell.com>
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
---
 .../net/ethernet/marvell/octeontx2/af/rvu.c   |  3 +
 .../net/ethernet/marvell/octeontx2/af/rvu.h   |  2 +
 .../ethernet/marvell/octeontx2/af/rvu_cpt.c   | 89 +++++++++++++++++++
 .../ethernet/marvell/octeontx2/af/rvu_reg.h   |  8 ++
 4 files changed, 102 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index 4ef7fc8bbb19..50c2a1d800f4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -2150,6 +2150,9 @@  static void rvu_blklf_teardown(struct rvu *rvu, u16 pcifunc, u8 blkaddr)
 			rvu_nix_lf_teardown(rvu, pcifunc, block->addr, lf);
 		else if (block->addr == BLKADDR_NPA)
 			rvu_npa_lf_teardown(rvu, pcifunc, lf);
+		else if ((block->addr == BLKADDR_CPT0) ||
+			 (block->addr == BLKADDR_CPT1))
+			rvu_cpt_lf_teardown(rvu, pcifunc, lf, slot);
 
 		err = rvu_lf_reset(rvu, block, lf);
 		if (err) {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index aabf6d5ee020..ce931d86600b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -608,6 +608,8 @@  void npc_enable_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam,
 void npc_read_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam,
 			 int blkaddr, u16 src, struct mcam_entry *entry,
 			 u8 *intf, u8 *ena);
+/* CPT APIs */
+int rvu_cpt_lf_teardown(struct rvu *rvu, u16 pcifunc, int lf, int slot);
 
 #ifdef CONFIG_DEBUG_FS
 void rvu_dbg_init(struct rvu *rvu);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
index b6de4b95a72a..0945c3a3b180 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
@@ -240,3 +240,92 @@  int rvu_mbox_handler_cpt_rd_wr_register(struct rvu *rvu,
 
 	return 0;
 }
+
+#define INPROG_INFLIGHT(reg)    ((reg) & 0x1FF)
+#define INPROG_GRB_PARTIAL(reg) ((reg) & BIT_ULL(31))
+#define INPROG_GRB(reg)         (((reg) >> 32) & 0xFF)
+#define INPROG_GWB(reg)         (((reg) >> 40) & 0xFF)
+
+static void cpt_lf_disable_iqueue(struct rvu *rvu, int blkaddr, int slot)
+{
+	int i = 0, hard_lp_ctr = 100000;
+	u64 inprog, grp_ptr;
+	u16 nq_ptr, dq_ptr;
+
+	/* Disable instructions enqueuing */
+	rvu_write64(rvu, blkaddr, CPT_AF_BAR2_ALIASX(slot, CPT_LF_CTL), 0x0);
+
+	/* Disable executions in the LF's queue */
+	inprog = rvu_read64(rvu, blkaddr,
+			    CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG));
+	inprog &= ~BIT_ULL(16);
+	rvu_write64(rvu, blkaddr,
+		    CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG), inprog);
+
+	/* Wait for CPT queue to become execution-quiescent */
+	do {
+		inprog = rvu_read64(rvu, blkaddr,
+				    CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG));
+		if (INPROG_GRB_PARTIAL(inprog)) {
+			i = 0;
+			hard_lp_ctr--;
+		} else {
+			i++;
+		}
+
+		grp_ptr = rvu_read64(rvu, blkaddr,
+				     CPT_AF_BAR2_ALIASX(slot,
+							CPT_LF_Q_GRP_PTR));
+		nq_ptr = (grp_ptr >> 32) & 0x7FFF;
+		dq_ptr = grp_ptr & 0x7FFF;
+
+	} while (hard_lp_ctr && (i < 10) && (nq_ptr != dq_ptr));
+
+	if (hard_lp_ctr == 0)
+		dev_warn(rvu->dev, "CPT FLR hits hard loop counter\n");
+
+	i = 0;
+	hard_lp_ctr = 100000;
+	do {
+		inprog = rvu_read64(rvu, blkaddr,
+				    CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG));
+
+		if ((INPROG_INFLIGHT(inprog) == 0) &&
+		    (INPROG_GWB(inprog) < 40) &&
+		    ((INPROG_GRB(inprog) == 0) ||
+		     (INPROG_GRB((inprog)) == 40))) {
+			i++;
+		} else {
+			i = 0;
+			hard_lp_ctr--;
+		}
+	} while (hard_lp_ctr && (i < 10));
+
+	if (hard_lp_ctr == 0)
+		dev_warn(rvu->dev, "CPT FLR hits hard loop counter\n");
+}
+
+int rvu_cpt_lf_teardown(struct rvu *rvu, u16 pcifunc, int lf, int slot)
+{
+	int blkaddr;
+	u64 reg;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, pcifunc);
+	if (blkaddr != BLKADDR_CPT0 && blkaddr != BLKADDR_CPT1)
+		return -EINVAL;
+
+	/* Enable BAR2 ALIAS for this pcifunc. */
+	reg = BIT_ULL(16) | pcifunc;
+	rvu_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, reg);
+
+	cpt_lf_disable_iqueue(rvu, blkaddr, slot);
+
+	/* Set group drop to help clear out hardware */
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG));
+	reg |= BIT_ULL(17);
+	rvu_write64(rvu, blkaddr, CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG), reg);
+
+	rvu_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, 0);
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
index 0fb2aa909a23..79a6dcf0e3c0 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
@@ -484,9 +484,17 @@ 
 #define CPT_AF_RAS_INT_ENA_W1S          (0x47030)
 #define CPT_AF_RAS_INT_ENA_W1C          (0x47038)
 
+#define AF_BAR2_ALIASX(a, b)            (0x9100000ull | (a) << 12 | (b))
+#define CPT_AF_BAR2_SEL                 0x9000000
+#define CPT_AF_BAR2_ALIASX(a, b)        AF_BAR2_ALIASX(a, b)
+
 #define CPT_AF_LF_CTL2_SHIFT 3
 #define CPT_AF_LF_SSO_PF_FUNC_SHIFT 32
 
+#define CPT_LF_CTL                      0x10
+#define CPT_LF_INPROG                   0x40
+#define CPT_LF_Q_GRP_PTR                0x120
+
 #define NPC_AF_BLK_RST                  (0x00040)
 
 /* NPC */