diff mbox series

[net-next,4/7] net: hns3: add support for obtaining the maximum frame length

Message ID 1612269593-18691-5-git-send-email-tanhuazhong@huawei.com
State New
Headers show
Series net: hns3: updates for -next | expand

Commit Message

Huazhong Tan Feb. 2, 2021, 12:39 p.m. UTC
From: Yufeng Mo <moyufeng@huawei.com>

Since the newer hardware may supports different frame size,
so add support to obtain the capability from the firmware
instead of the fixed value.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.h             | 1 +
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h  | 3 ++-
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +++++-
 3 files changed, 8 insertions(+), 2 deletions(-)

Comments

Jakub Kicinski Feb. 4, 2021, 12:56 a.m. UTC | #1
On Tue, 2 Feb 2021 20:39:50 +0800 Huazhong Tan wrote:
> From: Yufeng Mo <moyufeng@huawei.com>

> 

> Since the newer hardware may supports different frame size,

> so add support to obtain the capability from the firmware

> instead of the fixed value.

> 

> Signed-off-by: Yufeng Mo <moyufeng@huawei.com>

> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>


> @@ -9659,7 +9663,7 @@ int hclge_set_vport_mtu(struct hclge_vport *vport, int new_mtu)

>  	/* HW supprt 2 layer vlan */

>  	max_frm_size = new_mtu + ETH_HLEN + ETH_FCS_LEN + 2 * VLAN_HLEN;

>  	if (max_frm_size < HCLGE_MAC_MIN_FRAME ||

> -	    max_frm_size > HCLGE_MAC_MAX_FRAME)

> +	    max_frm_size > hdev->ae_dev->dev_specs.max_pkt_len)

>  		return -EINVAL;

>  

>  	max_frm_size = max(max_frm_size, HCLGE_MAC_DEFAULT_FRAME);


Don't you have to adjust netdev->max_mtu as well when device specifies
max_pkt_len different than HCLGE_MAC_MAX_FRAME?
Huazhong Tan Feb. 4, 2021, 2:01 a.m. UTC | #2
On 2021/2/4 8:56, Jakub Kicinski wrote:
> On Tue, 2 Feb 2021 20:39:50 +0800 Huazhong Tan wrote:

>> From: Yufeng Mo <moyufeng@huawei.com>

>>

>> Since the newer hardware may supports different frame size,

>> so add support to obtain the capability from the firmware

>> instead of the fixed value.

>>

>> Signed-off-by: Yufeng Mo <moyufeng@huawei.com>

>> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>

>> @@ -9659,7 +9663,7 @@ int hclge_set_vport_mtu(struct hclge_vport *vport, int new_mtu)

>>   	/* HW supprt 2 layer vlan */

>>   	max_frm_size = new_mtu + ETH_HLEN + ETH_FCS_LEN + 2 * VLAN_HLEN;

>>   	if (max_frm_size < HCLGE_MAC_MIN_FRAME ||

>> -	    max_frm_size > HCLGE_MAC_MAX_FRAME)

>> +	    max_frm_size > hdev->ae_dev->dev_specs.max_pkt_len)

>>   		return -EINVAL;

>>   

>>   	max_frm_size = max(max_frm_size, HCLGE_MAC_DEFAULT_FRAME);

> Don't you have to adjust netdev->max_mtu as well when device specifies

> max_pkt_len different than HCLGE_MAC_MAX_FRAME?


netdev->max_mtu should be adjusted as well, will fix it.

thanks.

> .
diff mbox series

Patch

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index f4c8d72..f27504e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -284,6 +284,7 @@  struct hnae3_dev_specs {
 	u16 int_ql_max; /* max value of interrupt coalesce based on INT_QL */
 	u16 max_int_gl; /* max value of interrupt coalesce based on INT_GL */
 	u8 max_non_tso_bd_num; /* max BD number of one non-TSO packet */
+	u16 max_pkt_len;
 };
 
 struct hnae3_client_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 9ceb059..0c8ac68 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -1131,7 +1131,8 @@  struct hclge_dev_specs_0_cmd {
 #define HCLGE_DEF_MAX_INT_GL		0x1FE0U
 
 struct hclge_dev_specs_1_cmd {
-	__le32 rsv0;
+	__le16 max_pkt_len;
+	__le16 rsv0;
 	__le16 max_int_gl;
 	u8 rsv1[18];
 };
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index fcf1bca..dd205c0 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1371,6 +1371,7 @@  static void hclge_set_default_dev_specs(struct hclge_dev *hdev)
 	ae_dev->dev_specs.rss_key_size = HCLGE_RSS_KEY_SIZE;
 	ae_dev->dev_specs.max_tm_rate = HCLGE_ETHER_MAX_RATE;
 	ae_dev->dev_specs.max_int_gl = HCLGE_DEF_MAX_INT_GL;
+	ae_dev->dev_specs.max_pkt_len = HCLGE_MAC_MAX_FRAME;
 }
 
 static void hclge_parse_dev_specs(struct hclge_dev *hdev,
@@ -1390,6 +1391,7 @@  static void hclge_parse_dev_specs(struct hclge_dev *hdev,
 	ae_dev->dev_specs.rss_key_size = le16_to_cpu(req0->rss_key_size);
 	ae_dev->dev_specs.max_tm_rate = le32_to_cpu(req0->max_tm_rate);
 	ae_dev->dev_specs.max_int_gl = le16_to_cpu(req1->max_int_gl);
+	ae_dev->dev_specs.max_pkt_len = le16_to_cpu(req1->max_pkt_len);
 }
 
 static void hclge_check_dev_specs(struct hclge_dev *hdev)
@@ -1406,6 +1408,8 @@  static void hclge_check_dev_specs(struct hclge_dev *hdev)
 		dev_specs->max_tm_rate = HCLGE_ETHER_MAX_RATE;
 	if (!dev_specs->max_int_gl)
 		dev_specs->max_int_gl = HCLGE_DEF_MAX_INT_GL;
+	if (!dev_specs->max_pkt_len)
+		dev_specs->max_pkt_len = HCLGE_MAC_MAX_FRAME;
 }
 
 static int hclge_query_dev_specs(struct hclge_dev *hdev)
@@ -9659,7 +9663,7 @@  int hclge_set_vport_mtu(struct hclge_vport *vport, int new_mtu)
 	/* HW supprt 2 layer vlan */
 	max_frm_size = new_mtu + ETH_HLEN + ETH_FCS_LEN + 2 * VLAN_HLEN;
 	if (max_frm_size < HCLGE_MAC_MIN_FRAME ||
-	    max_frm_size > HCLGE_MAC_MAX_FRAME)
+	    max_frm_size > hdev->ae_dev->dev_specs.max_pkt_len)
 		return -EINVAL;
 
 	max_frm_size = max(max_frm_size, HCLGE_MAC_DEFAULT_FRAME);