Message ID | 1411003825-21521-5-git-send-email-Liviu.Dudau@arm.com |
---|---|
State | New |
Headers | show |
On Thu, Sep 18, 2014 at 02:30:19AM +0100, Liviu Dudau wrote: > The ranges property for a host bridge controller in DT describes > the mapping between the PCI bus address and the CPU physical address. > The resources framework however expects that the IO resources start > at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. > The conversion from pci ranges to resources failed to take that into account. > > In the process move the function into drivers/of/address.c as it now > depends on pci_address_to_pio() code and make it return an error code. I think you're talking about of_pci_range_to_resource(). Can you split this into one patch that moves it from of_address.h to of/address.c without changing its functionality, and a second one that does the actual change? Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On 09/17/2014 08:30 PM, Liviu Dudau wrote: > The ranges property for a host bridge controller in DT describes > the mapping between the PCI bus address and the CPU physical address. > The resources framework however expects that the IO resources start > at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. > The conversion from pci ranges to resources failed to take that into account. > > In the process move the function into drivers/of/address.c as it now > depends on pci_address_to_pio() code and make it return an error code. > Also fix all the drivers that depend on the old behaviour by fetching > the CPU physical address based on the port number. > > Cc: Grant Likely <grant.likely@linaro.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Simon Horman <horms@verge.net.au> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> A few minor things below. > --- > arch/arm/mach-integrator/pci_v3.c | 23 ++++++++++---------- > drivers/of/address.c | 46 +++++++++++++++++++++++++++++++++++++++ > drivers/pci/host/pci-tegra.c | 10 ++++++--- > drivers/pci/host/pcie-rcar.c | 21 +++++++++++++----- > include/linux/of_address.h | 13 ++--------- > 5 files changed, 82 insertions(+), 31 deletions(-) > > diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c > index 05e1f73..3321e1b 100644 > --- a/arch/arm/mach-integrator/pci_v3.c > +++ b/arch/arm/mach-integrator/pci_v3.c > @@ -660,6 +660,7 @@ static void __init pci_v3_preinit(void) > { > unsigned long flags; > unsigned int temp; > + phys_addr_t io_address = pci_pio_to_address(io_mem.start); > > pcibios_min_mem = 0x00100000; > > @@ -701,7 +702,7 @@ static void __init pci_v3_preinit(void) > /* > * Setup window 2 - PCI IO > */ > - v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) | > + v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) | > V3_LB_BASE_ENABLE); > v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0)); > > @@ -742,6 +743,7 @@ static void __init pci_v3_preinit(void) > static void __init pci_v3_postinit(void) > { > unsigned int pci_cmd; > + phys_addr_t io_address = pci_pio_to_address(io_mem.start); > > pci_cmd = PCI_COMMAND_MEMORY | > PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; > @@ -758,7 +760,7 @@ static void __init pci_v3_postinit(void) > "interrupt: %d\n", ret); > #endif > > - register_isa_ports(non_mem.start, io_mem.start, 0); > + register_isa_ports(non_mem.start, io_address, 0); > } > > /* > @@ -867,33 +869,32 @@ static int __init pci_v3_probe(struct platform_device *pdev) > > for_each_of_pci_range(&parser, &range) { > if (!range.flags) { > - of_pci_range_to_resource(&range, np, &conf_mem); > + ret = of_pci_range_to_resource(&range, np, &conf_mem); > conf_mem.name = "PCIv3 config"; > } > if (range.flags & IORESOURCE_IO) { > - of_pci_range_to_resource(&range, np, &io_mem); > + ret = of_pci_range_to_resource(&range, np, &io_mem); > io_mem.name = "PCIv3 I/O"; > } > if ((range.flags & IORESOURCE_MEM) && > !(range.flags & IORESOURCE_PREFETCH)) { > non_mem_pci = range.pci_addr; > non_mem_pci_sz = range.size; > - of_pci_range_to_resource(&range, np, &non_mem); > + ret = of_pci_range_to_resource(&range, np, &non_mem); > non_mem.name = "PCIv3 non-prefetched mem"; > } > if ((range.flags & IORESOURCE_MEM) && > (range.flags & IORESOURCE_PREFETCH)) { > pre_mem_pci = range.pci_addr; > pre_mem_pci_sz = range.size; > - of_pci_range_to_resource(&range, np, &pre_mem); > + ret = of_pci_range_to_resource(&range, np, &pre_mem); > pre_mem.name = "PCIv3 prefetched mem"; > } > - } > > - if (!conf_mem.start || !io_mem.start || > - !non_mem.start || !pre_mem.start) { > - dev_err(&pdev->dev, "missing ranges in device node\n"); > - return -EINVAL; > + if (ret < 0) { > + dev_err(&pdev->dev, "missing ranges in device node\n"); > + return -EINVAL; You should return ret rather than potentially changing the return value. > + } > } > > pci_v3.map_irq = of_irq_parse_and_map_pci; > diff --git a/drivers/of/address.c b/drivers/of/address.c > index 2373a92..ff10b64 100644 > --- a/drivers/of/address.c > +++ b/drivers/of/address.c > @@ -947,3 +947,49 @@ bool of_dma_is_coherent(struct device_node *np) > return false; > } > EXPORT_SYMBOL_GPL(of_dma_is_coherent); > + > +/* > + * of_pci_range_to_resource - Create a resource from an of_pci_range > + * @range: the PCI range that describes the resource > + * @np: device node where the range belongs to > + * @res: pointer to a valid resource that will be updated to > + * reflect the values contained in the range. > + * > + * Returns EINVAL if the range cannot be converted to resource. > + * > + * Note that if the range is an IO range, the resource will be converted > + * using pci_address_to_pio() which can fail if it is called too early or > + * if the range cannot be matched to any host bridge IO space (our case here). > + * To guard against that we try to register the IO range first. > + * If that fails we know that pci_address_to_pio() will do too. > + */ > +int of_pci_range_to_resource(struct of_pci_range *range, > + struct device_node *np, struct resource *res) > +{ > + int err; > + res->flags = range->flags; > + res->parent = res->child = res->sibling = NULL; > + res->name = np->full_name; > + > + if (res->flags & IORESOURCE_IO) { > + unsigned long port = -1; Assigning a signed value to unsigned... Does port need to be 64-bit on 64-bit hosts? > + err = pci_register_io_range(range->cpu_addr, range->size); > + if (err) > + goto invalid_range; > + port = pci_address_to_pio(range->cpu_addr); > + if (port == (unsigned long)-1) { > + err = -EINVAL; > + goto invalid_range; > + } > + res->start = port; > + } else { > + res->start = range->cpu_addr; > + } > + res->end = res->start + range->size - 1; > + return 0; > + > +invalid_range: > + res->start = (resource_size_t)OF_BAD_ADDR; > + res->end = (resource_size_t)OF_BAD_ADDR; > + return err; > +} > diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c > index 0fb0fdb..946935d 100644 > --- a/drivers/pci/host/pci-tegra.c > +++ b/drivers/pci/host/pci-tegra.c > @@ -626,13 +626,14 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable); > static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) > { > struct tegra_pcie *pcie = sys_to_pcie(sys); > + phys_addr_t io_start = pci_pio_to_address(pcie->io.start); > > pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset); > pci_add_resource_offset(&sys->resources, &pcie->prefetch, > sys->mem_offset); > pci_add_resource(&sys->resources, &pcie->busn); > > - pci_ioremap_io(nr * SZ_64K, pcie->io.start); > + pci_ioremap_io(nr * SZ_64K, io_start); > > return 1; > } > @@ -737,6 +738,7 @@ static irqreturn_t tegra_pcie_isr(int irq, void *arg) > static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) > { > u32 fpci_bar, size, axi_address; > + phys_addr_t io_start = pci_pio_to_address(pcie->io.start); > > /* Bar 0: type 1 extended configuration space */ > fpci_bar = 0xfe100000; > @@ -749,7 +751,7 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) > /* Bar 1: downstream IO bar */ > fpci_bar = 0xfdfc0000; > size = resource_size(&pcie->io); > - axi_address = pcie->io.start; > + axi_address = io_start; > afi_writel(pcie, axi_address, AFI_AXI_BAR1_START); > afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ); > afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1); > @@ -1520,7 +1522,9 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie) > } > > for_each_of_pci_range(&parser, &range) { > - of_pci_range_to_resource(&range, np, &res); > + err = of_pci_range_to_resource(&range, np, &res); > + if (err < 0) > + return err; > > switch (res.flags & IORESOURCE_TYPE_BITS) { > case IORESOURCE_IO: > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c > index 4884ee5..61158e0 100644 > --- a/drivers/pci/host/pcie-rcar.c > +++ b/drivers/pci/host/pcie-rcar.c > @@ -323,6 +323,7 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie) > > /* Setup PCIe address space mappings for each resource */ > resource_size_t size; > + resource_size_t res_start; > u32 mask; > > rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win)); > @@ -335,8 +336,13 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie) > mask = (roundup_pow_of_two(size) / SZ_128) - 1; > rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win)); > > - rcar_pci_write_reg(pcie, upper_32_bits(res->start), PCIEPARH(win)); > - rcar_pci_write_reg(pcie, lower_32_bits(res->start), PCIEPARL(win)); > + if (res->flags & IORESOURCE_IO) > + res_start = pci_pio_to_address(res->start); > + else > + res_start = res->start; > + > + rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPARH(win)); > + rcar_pci_write_reg(pcie, lower_32_bits(res_start), PCIEPARL(win)); > > /* First resource is for IO */ > mask = PAR_ENABLE; > @@ -363,9 +369,10 @@ static int rcar_pcie_setup(int nr, struct pci_sys_data *sys) > > rcar_pcie_setup_window(i, pcie); > > - if (res->flags & IORESOURCE_IO) > - pci_ioremap_io(nr * SZ_64K, res->start); > - else > + if (res->flags & IORESOURCE_IO) { > + phys_addr_t io_start = pci_pio_to_address(res->start); > + pci_ioremap_io(nr * SZ_64K, io_start); > + } else > pci_add_resource(&sys->resources, res); > } > pci_add_resource(&sys->resources, &pcie->busn); > @@ -935,8 +942,10 @@ static int rcar_pcie_probe(struct platform_device *pdev) > } > > for_each_of_pci_range(&parser, &range) { > - of_pci_range_to_resource(&range, pdev->dev.of_node, > + err = of_pci_range_to_resource(&range, pdev->dev.of_node, > &pcie->res[win++]); > + if (err < 0) > + return err; > > if (win > RCAR_PCI_MAX_RESOURCES) > break; > diff --git a/include/linux/of_address.h b/include/linux/of_address.h > index f8cc7da..c9d70deb 100644 > --- a/include/linux/of_address.h > +++ b/include/linux/of_address.h > @@ -23,17 +23,8 @@ struct of_pci_range { > #define for_each_of_pci_range(parser, range) \ > for (; of_pci_range_parser_one(parser, range);) > > -static inline void of_pci_range_to_resource(struct of_pci_range *range, > - struct device_node *np, > - struct resource *res) > -{ > - res->flags = range->flags; > - res->start = range->cpu_addr; > - res->end = range->cpu_addr + range->size - 1; > - res->parent = res->child = res->sibling = NULL; > - res->name = np->full_name; > -} > - > +extern int of_pci_range_to_resource(struct of_pci_range *range, > + struct device_node *np, struct resource *res); We probably need an empty version of this now for !OF_ADDRESS. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Sep 20, 2014 at 06:33:11PM +0100, Rob Herring wrote: > On 09/17/2014 08:30 PM, Liviu Dudau wrote: > > The ranges property for a host bridge controller in DT describes > > the mapping between the PCI bus address and the CPU physical address. > > The resources framework however expects that the IO resources start > > at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. > > The conversion from pci ranges to resources failed to take that into account. > > > > In the process move the function into drivers/of/address.c as it now > > depends on pci_address_to_pio() code and make it return an error code. > > Also fix all the drivers that depend on the old behaviour by fetching > > the CPU physical address based on the port number. > > > > Cc: Grant Likely <grant.likely@linaro.org> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Arnd Bergmann <arnd@arndb.de> > > Cc: Linus Walleij <linus.walleij@linaro.org> > > Cc: Thierry Reding <thierry.reding@gmail.com> > > Cc: Simon Horman <horms@verge.net.au> > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> > > A few minor things below. > > > --- > > arch/arm/mach-integrator/pci_v3.c | 23 ++++++++++---------- > > drivers/of/address.c | 46 +++++++++++++++++++++++++++++++++++++++ > > drivers/pci/host/pci-tegra.c | 10 ++++++--- > > drivers/pci/host/pcie-rcar.c | 21 +++++++++++++----- > > include/linux/of_address.h | 13 ++--------- > > 5 files changed, 82 insertions(+), 31 deletions(-) > > > > diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c > > index 05e1f73..3321e1b 100644 > > --- a/arch/arm/mach-integrator/pci_v3.c > > +++ b/arch/arm/mach-integrator/pci_v3.c > > @@ -660,6 +660,7 @@ static void __init pci_v3_preinit(void) > > { > > unsigned long flags; > > unsigned int temp; > > + phys_addr_t io_address = pci_pio_to_address(io_mem.start); > > > > pcibios_min_mem = 0x00100000; > > > > @@ -701,7 +702,7 @@ static void __init pci_v3_preinit(void) > > /* > > * Setup window 2 - PCI IO > > */ > > - v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) | > > + v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) | > > V3_LB_BASE_ENABLE); > > v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0)); > > > > @@ -742,6 +743,7 @@ static void __init pci_v3_preinit(void) > > static void __init pci_v3_postinit(void) > > { > > unsigned int pci_cmd; > > + phys_addr_t io_address = pci_pio_to_address(io_mem.start); > > > > pci_cmd = PCI_COMMAND_MEMORY | > > PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; > > @@ -758,7 +760,7 @@ static void __init pci_v3_postinit(void) > > "interrupt: %d\n", ret); > > #endif > > > > - register_isa_ports(non_mem.start, io_mem.start, 0); > > + register_isa_ports(non_mem.start, io_address, 0); > > } > > > > /* > > @@ -867,33 +869,32 @@ static int __init pci_v3_probe(struct platform_device *pdev) > > > > for_each_of_pci_range(&parser, &range) { > > if (!range.flags) { > > - of_pci_range_to_resource(&range, np, &conf_mem); > > + ret = of_pci_range_to_resource(&range, np, &conf_mem); > > conf_mem.name = "PCIv3 config"; > > } > > if (range.flags & IORESOURCE_IO) { > > - of_pci_range_to_resource(&range, np, &io_mem); > > + ret = of_pci_range_to_resource(&range, np, &io_mem); > > io_mem.name = "PCIv3 I/O"; > > } > > if ((range.flags & IORESOURCE_MEM) && > > !(range.flags & IORESOURCE_PREFETCH)) { > > non_mem_pci = range.pci_addr; > > non_mem_pci_sz = range.size; > > - of_pci_range_to_resource(&range, np, &non_mem); > > + ret = of_pci_range_to_resource(&range, np, &non_mem); > > non_mem.name = "PCIv3 non-prefetched mem"; > > } > > if ((range.flags & IORESOURCE_MEM) && > > (range.flags & IORESOURCE_PREFETCH)) { > > pre_mem_pci = range.pci_addr; > > pre_mem_pci_sz = range.size; > > - of_pci_range_to_resource(&range, np, &pre_mem); > > + ret = of_pci_range_to_resource(&range, np, &pre_mem); > > pre_mem.name = "PCIv3 prefetched mem"; > > } > > - } > > > > - if (!conf_mem.start || !io_mem.start || > > - !non_mem.start || !pre_mem.start) { > > - dev_err(&pdev->dev, "missing ranges in device node\n"); > > - return -EINVAL; > > + if (ret < 0) { > > + dev_err(&pdev->dev, "missing ranges in device node\n"); > > + return -EINVAL; > > You should return ret rather than potentially changing the return value. I was trying to keep the existing behaviour, which was to return -EINVAL if the parsing has failed. But I can return ret and propagate the original error code. > > > + } > > } > > > > pci_v3.map_irq = of_irq_parse_and_map_pci; > > diff --git a/drivers/of/address.c b/drivers/of/address.c > > index 2373a92..ff10b64 100644 > > --- a/drivers/of/address.c > > +++ b/drivers/of/address.c > > @@ -947,3 +947,49 @@ bool of_dma_is_coherent(struct device_node *np) > > return false; > > } > > EXPORT_SYMBOL_GPL(of_dma_is_coherent); > > + > > +/* > > + * of_pci_range_to_resource - Create a resource from an of_pci_range > > + * @range: the PCI range that describes the resource > > + * @np: device node where the range belongs to > > + * @res: pointer to a valid resource that will be updated to > > + * reflect the values contained in the range. > > + * > > + * Returns EINVAL if the range cannot be converted to resource. > > + * > > + * Note that if the range is an IO range, the resource will be converted > > + * using pci_address_to_pio() which can fail if it is called too early or > > + * if the range cannot be matched to any host bridge IO space (our case here). > > + * To guard against that we try to register the IO range first. > > + * If that fails we know that pci_address_to_pio() will do too. > > + */ > > +int of_pci_range_to_resource(struct of_pci_range *range, > > + struct device_node *np, struct resource *res) > > +{ > > + int err; > > + res->flags = range->flags; > > + res->parent = res->child = res->sibling = NULL; > > + res->name = np->full_name; > > + > > + if (res->flags & IORESOURCE_IO) { > > + unsigned long port = -1; > > Assigning a signed value to unsigned... Ooops, sorry about that. Removed the initialisation now. > > Does port need to be 64-bit on 64-bit hosts? I'm following existing APIs. Basically my function is a variant of __of_address_to_resource() > > > + err = pci_register_io_range(range->cpu_addr, range->size); > > + if (err) > > + goto invalid_range; > > + port = pci_address_to_pio(range->cpu_addr); > > + if (port == (unsigned long)-1) { > > + err = -EINVAL; > > + goto invalid_range; > > + } > > + res->start = port; > > + } else { > > + res->start = range->cpu_addr; > > + } > > + res->end = res->start + range->size - 1; > > + return 0; > > + > > +invalid_range: > > + res->start = (resource_size_t)OF_BAD_ADDR; > > + res->end = (resource_size_t)OF_BAD_ADDR; > > + return err; > > +} > > diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c > > index 0fb0fdb..946935d 100644 > > --- a/drivers/pci/host/pci-tegra.c > > +++ b/drivers/pci/host/pci-tegra.c > > @@ -626,13 +626,14 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable); > > static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) > > { > > struct tegra_pcie *pcie = sys_to_pcie(sys); > > + phys_addr_t io_start = pci_pio_to_address(pcie->io.start); > > > > pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset); > > pci_add_resource_offset(&sys->resources, &pcie->prefetch, > > sys->mem_offset); > > pci_add_resource(&sys->resources, &pcie->busn); > > > > - pci_ioremap_io(nr * SZ_64K, pcie->io.start); > > + pci_ioremap_io(nr * SZ_64K, io_start); > > > > return 1; > > } > > @@ -737,6 +738,7 @@ static irqreturn_t tegra_pcie_isr(int irq, void *arg) > > static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) > > { > > u32 fpci_bar, size, axi_address; > > + phys_addr_t io_start = pci_pio_to_address(pcie->io.start); > > > > /* Bar 0: type 1 extended configuration space */ > > fpci_bar = 0xfe100000; > > @@ -749,7 +751,7 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) > > /* Bar 1: downstream IO bar */ > > fpci_bar = 0xfdfc0000; > > size = resource_size(&pcie->io); > > - axi_address = pcie->io.start; > > + axi_address = io_start; > > afi_writel(pcie, axi_address, AFI_AXI_BAR1_START); > > afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ); > > afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1); > > @@ -1520,7 +1522,9 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie) > > } > > > > for_each_of_pci_range(&parser, &range) { > > - of_pci_range_to_resource(&range, np, &res); > > + err = of_pci_range_to_resource(&range, np, &res); > > + if (err < 0) > > + return err; > > > > switch (res.flags & IORESOURCE_TYPE_BITS) { > > case IORESOURCE_IO: > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c > > index 4884ee5..61158e0 100644 > > --- a/drivers/pci/host/pcie-rcar.c > > +++ b/drivers/pci/host/pcie-rcar.c > > @@ -323,6 +323,7 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie) > > > > /* Setup PCIe address space mappings for each resource */ > > resource_size_t size; > > + resource_size_t res_start; > > u32 mask; > > > > rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win)); > > @@ -335,8 +336,13 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie) > > mask = (roundup_pow_of_two(size) / SZ_128) - 1; > > rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win)); > > > > - rcar_pci_write_reg(pcie, upper_32_bits(res->start), PCIEPARH(win)); > > - rcar_pci_write_reg(pcie, lower_32_bits(res->start), PCIEPARL(win)); > > + if (res->flags & IORESOURCE_IO) > > + res_start = pci_pio_to_address(res->start); > > + else > > + res_start = res->start; > > + > > + rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPARH(win)); > > + rcar_pci_write_reg(pcie, lower_32_bits(res_start), PCIEPARL(win)); > > > > /* First resource is for IO */ > > mask = PAR_ENABLE; > > @@ -363,9 +369,10 @@ static int rcar_pcie_setup(int nr, struct pci_sys_data *sys) > > > > rcar_pcie_setup_window(i, pcie); > > > > - if (res->flags & IORESOURCE_IO) > > - pci_ioremap_io(nr * SZ_64K, res->start); > > - else > > + if (res->flags & IORESOURCE_IO) { > > + phys_addr_t io_start = pci_pio_to_address(res->start); > > + pci_ioremap_io(nr * SZ_64K, io_start); > > + } else > > pci_add_resource(&sys->resources, res); > > } > > pci_add_resource(&sys->resources, &pcie->busn); > > @@ -935,8 +942,10 @@ static int rcar_pcie_probe(struct platform_device *pdev) > > } > > > > for_each_of_pci_range(&parser, &range) { > > - of_pci_range_to_resource(&range, pdev->dev.of_node, > > + err = of_pci_range_to_resource(&range, pdev->dev.of_node, > > &pcie->res[win++]); > > + if (err < 0) > > + return err; > > > > if (win > RCAR_PCI_MAX_RESOURCES) > > break; > > diff --git a/include/linux/of_address.h b/include/linux/of_address.h > > index f8cc7da..c9d70deb 100644 > > --- a/include/linux/of_address.h > > +++ b/include/linux/of_address.h > > @@ -23,17 +23,8 @@ struct of_pci_range { > > #define for_each_of_pci_range(parser, range) \ > > for (; of_pci_range_parser_one(parser, range);) > > > > -static inline void of_pci_range_to_resource(struct of_pci_range *range, > > - struct device_node *np, > > - struct resource *res) > > -{ > > - res->flags = range->flags; > > - res->start = range->cpu_addr; > > - res->end = range->cpu_addr + range->size - 1; > > - res->parent = res->child = res->sibling = NULL; > > - res->name = np->full_name; > > -} > > - > > +extern int of_pci_range_to_resource(struct of_pci_range *range, > > + struct device_node *np, struct resource *res); > > We probably need an empty version of this now for !OF_ADDRESS. Good catch! Will update my patch. Thanks for finding time to review the series! Best regards, Liviu > > Rob >
On Mon, Sep 22, 2014 at 10:32 AM, Liviu Dudau <Liviu.Dudau@arm.com> wrote: > On Sat, Sep 20, 2014 at 06:33:11PM +0100, Rob Herring wrote: >> On 09/17/2014 08:30 PM, Liviu Dudau wrote: >> > The ranges property for a host bridge controller in DT describes >> > the mapping between the PCI bus address and the CPU physical address. >> > The resources framework however expects that the IO resources start >> > at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. >> > The conversion from pci ranges to resources failed to take that into account. [...] >> > if ((range.flags & IORESOURCE_MEM) && >> > (range.flags & IORESOURCE_PREFETCH)) { >> > pre_mem_pci = range.pci_addr; >> > pre_mem_pci_sz = range.size; >> > - of_pci_range_to_resource(&range, np, &pre_mem); >> > + ret = of_pci_range_to_resource(&range, np, &pre_mem); >> > pre_mem.name = "PCIv3 prefetched mem"; >> > } >> > - } >> > >> > - if (!conf_mem.start || !io_mem.start || >> > - !non_mem.start || !pre_mem.start) { >> > - dev_err(&pdev->dev, "missing ranges in device node\n"); >> > - return -EINVAL; >> > + if (ret < 0) { >> > + dev_err(&pdev->dev, "missing ranges in device node\n"); >> > + return -EINVAL; >> >> You should return ret rather than potentially changing the return value. > > I was trying to keep the existing behaviour, which was to return -EINVAL if the > parsing has failed. But I can return ret and propagate the original error code. A valid concern, but I checked and I believe the return from of_pci_range_to_resource is currently -EINVAL. >> > +int of_pci_range_to_resource(struct of_pci_range *range, >> > + struct device_node *np, struct resource *res) >> > +{ >> > + int err; >> > + res->flags = range->flags; >> > + res->parent = res->child = res->sibling = NULL; >> > + res->name = np->full_name; >> > + >> > + if (res->flags & IORESOURCE_IO) { >> > + unsigned long port = -1; >> >> Assigning a signed value to unsigned... > > Ooops, sorry about that. Removed the initialisation now. > >> >> Does port need to be 64-bit on 64-bit hosts? > > I'm following existing APIs. Basically my function is a variant of __of_address_to_resource() Okay. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 05e1f73..3321e1b 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -660,6 +660,7 @@ static void __init pci_v3_preinit(void) { unsigned long flags; unsigned int temp; + phys_addr_t io_address = pci_pio_to_address(io_mem.start); pcibios_min_mem = 0x00100000; @@ -701,7 +702,7 @@ static void __init pci_v3_preinit(void) /* * Setup window 2 - PCI IO */ - v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) | + v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) | V3_LB_BASE_ENABLE); v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0)); @@ -742,6 +743,7 @@ static void __init pci_v3_preinit(void) static void __init pci_v3_postinit(void) { unsigned int pci_cmd; + phys_addr_t io_address = pci_pio_to_address(io_mem.start); pci_cmd = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; @@ -758,7 +760,7 @@ static void __init pci_v3_postinit(void) "interrupt: %d\n", ret); #endif - register_isa_ports(non_mem.start, io_mem.start, 0); + register_isa_ports(non_mem.start, io_address, 0); } /* @@ -867,33 +869,32 @@ static int __init pci_v3_probe(struct platform_device *pdev) for_each_of_pci_range(&parser, &range) { if (!range.flags) { - of_pci_range_to_resource(&range, np, &conf_mem); + ret = of_pci_range_to_resource(&range, np, &conf_mem); conf_mem.name = "PCIv3 config"; } if (range.flags & IORESOURCE_IO) { - of_pci_range_to_resource(&range, np, &io_mem); + ret = of_pci_range_to_resource(&range, np, &io_mem); io_mem.name = "PCIv3 I/O"; } if ((range.flags & IORESOURCE_MEM) && !(range.flags & IORESOURCE_PREFETCH)) { non_mem_pci = range.pci_addr; non_mem_pci_sz = range.size; - of_pci_range_to_resource(&range, np, &non_mem); + ret = of_pci_range_to_resource(&range, np, &non_mem); non_mem.name = "PCIv3 non-prefetched mem"; } if ((range.flags & IORESOURCE_MEM) && (range.flags & IORESOURCE_PREFETCH)) { pre_mem_pci = range.pci_addr; pre_mem_pci_sz = range.size; - of_pci_range_to_resource(&range, np, &pre_mem); + ret = of_pci_range_to_resource(&range, np, &pre_mem); pre_mem.name = "PCIv3 prefetched mem"; } - } - if (!conf_mem.start || !io_mem.start || - !non_mem.start || !pre_mem.start) { - dev_err(&pdev->dev, "missing ranges in device node\n"); - return -EINVAL; + if (ret < 0) { + dev_err(&pdev->dev, "missing ranges in device node\n"); + return -EINVAL; + } } pci_v3.map_irq = of_irq_parse_and_map_pci; diff --git a/drivers/of/address.c b/drivers/of/address.c index 2373a92..ff10b64 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -947,3 +947,49 @@ bool of_dma_is_coherent(struct device_node *np) return false; } EXPORT_SYMBOL_GPL(of_dma_is_coherent); + +/* + * of_pci_range_to_resource - Create a resource from an of_pci_range + * @range: the PCI range that describes the resource + * @np: device node where the range belongs to + * @res: pointer to a valid resource that will be updated to + * reflect the values contained in the range. + * + * Returns EINVAL if the range cannot be converted to resource. + * + * Note that if the range is an IO range, the resource will be converted + * using pci_address_to_pio() which can fail if it is called too early or + * if the range cannot be matched to any host bridge IO space (our case here). + * To guard against that we try to register the IO range first. + * If that fails we know that pci_address_to_pio() will do too. + */ +int of_pci_range_to_resource(struct of_pci_range *range, + struct device_node *np, struct resource *res) +{ + int err; + res->flags = range->flags; + res->parent = res->child = res->sibling = NULL; + res->name = np->full_name; + + if (res->flags & IORESOURCE_IO) { + unsigned long port = -1; + err = pci_register_io_range(range->cpu_addr, range->size); + if (err) + goto invalid_range; + port = pci_address_to_pio(range->cpu_addr); + if (port == (unsigned long)-1) { + err = -EINVAL; + goto invalid_range; + } + res->start = port; + } else { + res->start = range->cpu_addr; + } + res->end = res->start + range->size - 1; + return 0; + +invalid_range: + res->start = (resource_size_t)OF_BAD_ADDR; + res->end = (resource_size_t)OF_BAD_ADDR; + return err; +} diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index 0fb0fdb..946935d 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -626,13 +626,14 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable); static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) { struct tegra_pcie *pcie = sys_to_pcie(sys); + phys_addr_t io_start = pci_pio_to_address(pcie->io.start); pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pcie->prefetch, sys->mem_offset); pci_add_resource(&sys->resources, &pcie->busn); - pci_ioremap_io(nr * SZ_64K, pcie->io.start); + pci_ioremap_io(nr * SZ_64K, io_start); return 1; } @@ -737,6 +738,7 @@ static irqreturn_t tegra_pcie_isr(int irq, void *arg) static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) { u32 fpci_bar, size, axi_address; + phys_addr_t io_start = pci_pio_to_address(pcie->io.start); /* Bar 0: type 1 extended configuration space */ fpci_bar = 0xfe100000; @@ -749,7 +751,7 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) /* Bar 1: downstream IO bar */ fpci_bar = 0xfdfc0000; size = resource_size(&pcie->io); - axi_address = pcie->io.start; + axi_address = io_start; afi_writel(pcie, axi_address, AFI_AXI_BAR1_START); afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ); afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1); @@ -1520,7 +1522,9 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie) } for_each_of_pci_range(&parser, &range) { - of_pci_range_to_resource(&range, np, &res); + err = of_pci_range_to_resource(&range, np, &res); + if (err < 0) + return err; switch (res.flags & IORESOURCE_TYPE_BITS) { case IORESOURCE_IO: diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c index 4884ee5..61158e0 100644 --- a/drivers/pci/host/pcie-rcar.c +++ b/drivers/pci/host/pcie-rcar.c @@ -323,6 +323,7 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie) /* Setup PCIe address space mappings for each resource */ resource_size_t size; + resource_size_t res_start; u32 mask; rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win)); @@ -335,8 +336,13 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie) mask = (roundup_pow_of_two(size) / SZ_128) - 1; rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win)); - rcar_pci_write_reg(pcie, upper_32_bits(res->start), PCIEPARH(win)); - rcar_pci_write_reg(pcie, lower_32_bits(res->start), PCIEPARL(win)); + if (res->flags & IORESOURCE_IO) + res_start = pci_pio_to_address(res->start); + else + res_start = res->start; + + rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPARH(win)); + rcar_pci_write_reg(pcie, lower_32_bits(res_start), PCIEPARL(win)); /* First resource is for IO */ mask = PAR_ENABLE; @@ -363,9 +369,10 @@ static int rcar_pcie_setup(int nr, struct pci_sys_data *sys) rcar_pcie_setup_window(i, pcie); - if (res->flags & IORESOURCE_IO) - pci_ioremap_io(nr * SZ_64K, res->start); - else + if (res->flags & IORESOURCE_IO) { + phys_addr_t io_start = pci_pio_to_address(res->start); + pci_ioremap_io(nr * SZ_64K, io_start); + } else pci_add_resource(&sys->resources, res); } pci_add_resource(&sys->resources, &pcie->busn); @@ -935,8 +942,10 @@ static int rcar_pcie_probe(struct platform_device *pdev) } for_each_of_pci_range(&parser, &range) { - of_pci_range_to_resource(&range, pdev->dev.of_node, + err = of_pci_range_to_resource(&range, pdev->dev.of_node, &pcie->res[win++]); + if (err < 0) + return err; if (win > RCAR_PCI_MAX_RESOURCES) break; diff --git a/include/linux/of_address.h b/include/linux/of_address.h index f8cc7da..c9d70deb 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -23,17 +23,8 @@ struct of_pci_range { #define for_each_of_pci_range(parser, range) \ for (; of_pci_range_parser_one(parser, range);) -static inline void of_pci_range_to_resource(struct of_pci_range *range, - struct device_node *np, - struct resource *res) -{ - res->flags = range->flags; - res->start = range->cpu_addr; - res->end = range->cpu_addr + range->size - 1; - res->parent = res->child = res->sibling = NULL; - res->name = np->full_name; -} - +extern int of_pci_range_to_resource(struct of_pci_range *range, + struct device_node *np, struct resource *res); /* Translate a DMA address from device space to CPU space */ extern u64 of_translate_dma_address(struct device_node *dev, const __be32 *in_addr);
The ranges property for a host bridge controller in DT describes the mapping between the PCI bus address and the CPU physical address. The resources framework however expects that the IO resources start at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The conversion from pci ranges to resources failed to take that into account. In the process move the function into drivers/of/address.c as it now depends on pci_address_to_pio() code and make it return an error code. Also fix all the drivers that depend on the old behaviour by fetching the CPU physical address based on the port number. Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Simon Horman <horms@verge.net.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> --- arch/arm/mach-integrator/pci_v3.c | 23 ++++++++++---------- drivers/of/address.c | 46 +++++++++++++++++++++++++++++++++++++++ drivers/pci/host/pci-tegra.c | 10 ++++++--- drivers/pci/host/pcie-rcar.c | 21 +++++++++++++----- include/linux/of_address.h | 13 ++--------- 5 files changed, 82 insertions(+), 31 deletions(-)