| Message ID | 20210204125718.1646082-1-geert+renesas@glider.be |
|---|---|
| State | Accepted |
| Commit | 74f2dd447900256e8aa986be868bcd835d3c60d1 |
| Headers | show |
| Series | dt-bindings: pinctrl: Group tuples in pin control properties | expand |
On Thu, Feb 04, 2021 at 01:57:18PM +0100, Geert Uytterhoeven wrote: > To improve human readability and enable automatic validation, the tuples > in "pinctrl-*" properties should be grouped using angle brackets. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > .../devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt | 2 +- > .../devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt | 2 +- > .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt | 2 +- > .../devicetree/bindings/pinctrl/pinctrl-bindings.txt | 4 ++-- > .../devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 2 +- > .../devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 2 +- > .../devicetree/bindings/pinctrl/pinctrl-single.txt | 10 +++++----- > .../devicetree/bindings/pinctrl/samsung-pinctrl.txt | 2 +- > 8 files changed, 13 insertions(+), 13 deletions(-) Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
On Thu, 04 Feb 2021 13:57:18 +0100, Geert Uytterhoeven wrote: > To improve human readability and enable automatic validation, the tuples > in "pinctrl-*" properties should be grouped using angle brackets. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > .../devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt | 2 +- > .../devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt | 2 +- > .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt | 2 +- > .../devicetree/bindings/pinctrl/pinctrl-bindings.txt | 4 ++-- > .../devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 2 +- > .../devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 2 +- > .../devicetree/bindings/pinctrl/pinctrl-single.txt | 10 +++++----- > .../devicetree/bindings/pinctrl/samsung-pinctrl.txt | 2 +- > 8 files changed, 13 insertions(+), 13 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt index e295dda4bbbab958..40e0a9a19525b40d 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt @@ -39,7 +39,7 @@ For example: <0x660009b0 0x40>; pinctrl-names = "default"; - pinctrl-0 = <&nand_sel &uart3_rx &sdio0_d4>; + pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>; /* Select nand function */ nand_sel: nand_sel { diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt index 603564e5fe6f0e54..dede11e4ef78087f 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt @@ -30,7 +30,7 @@ For example: <0x1803f408 0x04>; pinctrl-names = "default"; - pinctrl-0 = <&pwm &gpio_b &nand_sel>; + pinctrl-0 = <&pwm>, <&gpio_b>, <&nand_sel>; pwm: pwm { function = "pwm"; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt index 8ac1d0851a0f8f0a..bfab5ca49fd1211a 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt @@ -60,7 +60,7 @@ iomuxc-lpsr controller and SDA pad from iomuxc controller as: i2c1: i2c@30a20000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>; + pinctrl-0 = <&pinctrl_i2c1_1>, <&pinctrl_i2c1_2>; }; iomuxc-lpsr@302c0000 { diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 4613bb17ace3f6e1..9dae60acf950641d 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -77,13 +77,13 @@ For example: device { pinctrl-names = "active", "idle"; pinctrl-0 = <&state_0_node_a>; - pinctrl-1 = <&state_1_node_a &state_1_node_b>; + pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>; }; /* For the same device if using state IDs */ device { pinctrl-0 = <&state_0_node_a>; - pinctrl-1 = <&state_1_node_a &state_1_node_b>; + pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>; }; /* diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index 8b94aa8f5971ceb7..6ec3c8d79f496b52 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -134,7 +134,7 @@ gpio21: gpio@21 { #interrupt-cells = <0x2>; microchip,irq-mirror; pinctrl-names = "default"; - pinctrl-0 = <&i2cgpio0irq &gpio21pullups>; + pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>; gpio21pullups: pinmux { pins = "gpio0", "gpio1", "gpio2", "gpio3", diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 931a18cd1e238e6c..360e59c9301a93a8 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -91,7 +91,7 @@ Examples: pinctrl@1c20800 { compatible = "mediatek,mt8135-pinctrl"; reg = <0 0x1000B000 0 0x1000>; - mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; + mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>; pins-are-numbered; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index bb99991193148cb2..bfd222b0549569df 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -80,7 +80,7 @@ Optional properties: property. /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>; + pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>; - interrupt-controller : standard interrupt controller binding if using interrupts for wake-up events for example. In this case pinctrl-single @@ -185,10 +185,10 @@ pmx_gpio: pinmux@d401e000 { pinctrl-single,function-mask = <7>; /* sparse GPIO range could be supported */ - pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1 - &range 12 1 0 &range 13 29 1 - &range 43 1 0 &range 44 49 1 - &range 94 1 1 &range 96 2 1>; + pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>, + <&range 12 1 0>, <&range 13 29 1>, + <&range 43 1 0>, <&range 44 49 1>, + <&range 94 1 1>, <&range 96 2 1>; range: gpio-range { #pinctrl-single,gpio-range-cells = <3>; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 7734ab6fec449471..38a1416fd2cd8e1a 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -336,7 +336,7 @@ Example 3: A uart client node that supports 'default' and 'flow-control' states. interrupts = <0 52 0>; pinctrl-names = "default", "flow-control; pinctrl-0 = <&uart0_data>; - pinctrl-1 = <&uart0_data &uart0_fctl>; + pinctrl-1 = <&uart0_data>, <&uart0_fctl>; }; Example 4: Set up the default pin state for uart controller.
To improve human readability and enable automatic validation, the tuples in "pinctrl-*" properties should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- .../devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt | 2 +- .../devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt | 2 +- .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt | 2 +- .../devicetree/bindings/pinctrl/pinctrl-bindings.txt | 4 ++-- .../devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 2 +- .../devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 2 +- .../devicetree/bindings/pinctrl/pinctrl-single.txt | 10 +++++----- .../devicetree/bindings/pinctrl/samsung-pinctrl.txt | 2 +- 8 files changed, 13 insertions(+), 13 deletions(-)