@@ -46,6 +46,9 @@
#define MAX_ULD_QSETS 16
#define MAX_ULD_NPORTS 4
+/* ulp_mem_io + ulptx_idata + payload + padding */
+#define MAX_IMM_ULPTX_WR_LEN (32 + 8 + 256 + 8)
+
/* CPL message priority levels */
enum {
CPL_PRIORITY_DATA = 0, /* data messages */
@@ -2842,17 +2842,22 @@ int t4_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
* @skb: the packet
*
* Returns true if a packet can be sent as an offload WR with immediate
- * data. We currently use the same limit as for Ethernet packets.
+ * data.
+ * FW_OFLD_TX_DATA_WR limits the payload to 255 bytes due to 8-bit field.
+ * However, FW_ULPTX_WR commands have a 256 byte immediate only
+ * payload limit.
*/
static inline int is_ofld_imm(const struct sk_buff *skb)
{
struct work_request_hdr *req = (struct work_request_hdr *)skb->data;
unsigned long opcode = FW_WR_OP_G(ntohl(req->wr_hi));
- if (opcode == FW_CRYPTO_LOOKASIDE_WR)
+ if (unlikely(opcode == FW_ULPTX_WR))
+ return skb->len <= MAX_IMM_ULPTX_WR_LEN;
+ else if (opcode == FW_CRYPTO_LOOKASIDE_WR)
return skb->len <= SGE_MAX_WR_LEN;
else
- return skb->len <= MAX_IMM_TX_PKT_LEN;
+ return skb->len <= MAX_IMM_OFLD_TX_DATA_WR_LEN;
}
/**
@@ -50,9 +50,6 @@
#define MIN_RCV_WND (24 * 1024U)
#define LOOPBACK(x) (((x) & htonl(0xff000000)) == htonl(0x7f000000))
-/* ulp_mem_io + ulptx_idata + payload + padding */
-#define MAX_IMM_ULPTX_WR_LEN (32 + 8 + 256 + 8)
-
/* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
#define TX_HEADER_LEN \
(sizeof(struct fw_ofld_tx_data_wr) + sizeof(struct sge_opaque_hdr))
@@ -86,8 +86,7 @@ static int cxgbit_is_ofld_imm(const struct sk_buff *skb)
if (likely(cxgbit_skcb_flags(skb) & SKCBF_TX_ISO))
length += sizeof(struct cpl_tx_data_iso);
-#define MAX_IMM_TX_PKT_LEN 256
- return length <= MAX_IMM_TX_PKT_LEN;
+ return length <= MAX_IMM_OFLD_TX_DATA_WR_LEN;
}
/*
The Max imm data size in cxgb4 is not similar to the max imm data size in the chtls. This caused an mismatch in output of is_ofld_imm() of cxgb4 and chtls. So fixed this by keeping the max wreq size of imm data same in both chtls and cxgb4 as MAX_IMM_OFLD_TX_DATA_WR_LEN. As cxgb4's max imm. data value for ofld packets is changed to MAX_IMM_OFLD_TX_DATA_WR_LEN. Using the same in cxgbit also. Fixes: 36bedb3f2e5b8 ("crypto: chtls - Inline TLS record Tx") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h | 3 +++ drivers/net/ethernet/chelsio/cxgb4/sge.c | 11 ++++++++--- .../ethernet/chelsio/inline_crypto/chtls/chtls_cm.h | 3 --- drivers/target/iscsi/cxgbit/cxgbit_target.c | 3 +-- 4 files changed, 12 insertions(+), 8 deletions(-)