@@ -43,6 +43,9 @@ struct msm_dsi_phy_cfg {
struct msm_dsi_phy_ops ops;
const struct msm_dsi_pll_ops pll_ops;
+ unsigned long min_pll_rate;
+ unsigned long max_pll_rate;
+
/*
* Each cell {phy_id, pll_id} of the truth table indicates
* if the source PLL selection bit should be set for each PHY.
@@ -861,8 +861,6 @@ static int dsi_pll_10nm_init(struct msm_dsi_phy *phy)
spin_lock_init(&pll_10nm->postdiv_lock);
pll = &pll_10nm->base;
- pll->min_rate = 1000000000UL;
- pll->max_rate = 3500000000UL;
pll->cfg = phy->cfg;
pll_10nm->vco_delay = 1;
@@ -1126,6 +1124,8 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs = {
.restore_state = dsi_pll_10nm_restore_state,
.set_usecase = dsi_pll_10nm_set_usecase,
},
+ .min_pll_rate = 1000000000UL,
+ .max_pll_rate = 3500000000UL,
.io_start = { 0xae94400, 0xae96400 },
.num_dsi_phy = 2,
};
@@ -1152,6 +1152,8 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs = {
.restore_state = dsi_pll_10nm_restore_state,
.set_usecase = dsi_pll_10nm_set_usecase,
},
+ .min_pll_rate = 1000000000UL,
+ .max_pll_rate = 3500000000UL,
.io_start = { 0xc994400, 0xc996400 },
.num_dsi_phy = 2,
.quirks = V3_0_0_10NM_OLD_TIMINGS_QUIRK,
@@ -1078,8 +1078,6 @@ static int dsi_pll_14nm_init(struct msm_dsi_phy *phy)
spin_lock_init(&pll_14nm->postdiv_lock);
pll = &pll_14nm->base;
- pll->min_rate = VCO_MIN_RATE;
- pll->max_rate = VCO_MAX_RATE;
pll->cfg = phy->cfg;
pll_14nm->vco_delay = 1;
@@ -1253,6 +1251,8 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = {
.disable_seq = dsi_pll_14nm_disable_seq,
.enable_seq = dsi_pll_14nm_enable_seq,
},
+ .min_pll_rate = VCO_MIN_RATE,
+ .max_pll_rate = VCO_MAX_RATE,
.io_start = { 0x994400, 0x996400 },
.num_dsi_phy = 2,
};
@@ -1281,6 +1281,8 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs = {
.disable_seq = dsi_pll_14nm_disable_seq,
.enable_seq = dsi_pll_14nm_enable_seq,
},
+ .min_pll_rate = VCO_MIN_RATE,
+ .max_pll_rate = VCO_MAX_RATE,
.io_start = { 0xc994400, 0xc996000 },
.num_dsi_phy = 2,
};
@@ -622,8 +622,6 @@ static int dsi_pll_28nm_hpm_init(struct msm_dsi_phy *phy)
}
pll = &pll_28nm->base;
- pll->min_rate = VCO_MIN_RATE;
- pll->max_rate = VCO_MAX_RATE;
pll_28nm->vco_delay = 1;
pll->cfg = phy->cfg;
@@ -664,8 +662,6 @@ static int dsi_pll_28nm_lp_init(struct msm_dsi_phy *phy)
}
pll = &pll_28nm->base;
- pll->min_rate = VCO_MIN_RATE;
- pll->max_rate = VCO_MAX_RATE;
pll_28nm->vco_delay = 1000;
pll->cfg = phy->cfg;
@@ -849,6 +845,8 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
.disable_seq = dsi_pll_28nm_disable_seq,
.enable_seq = dsi_pll_28nm_enable_seq_hpm,
},
+ .min_pll_rate = VCO_MIN_RATE,
+ .max_pll_rate = VCO_MAX_RATE,
.io_start = { 0xfd922b00, 0xfd923100 },
.num_dsi_phy = 2,
};
@@ -876,6 +874,8 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs = {
.disable_seq = dsi_pll_28nm_disable_seq,
.enable_seq = dsi_pll_28nm_enable_seq_hpm,
},
+ .min_pll_rate = VCO_MIN_RATE,
+ .max_pll_rate = VCO_MAX_RATE,
.io_start = { 0x1a94400, 0x1a96400 },
.num_dsi_phy = 2,
};
@@ -903,6 +903,8 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
.disable_seq = dsi_pll_28nm_disable_seq,
.enable_seq = dsi_pll_28nm_enable_seq_lp,
},
+ .min_pll_rate = VCO_MIN_RATE,
+ .max_pll_rate = VCO_MAX_RATE,
.io_start = { 0x1a98500 },
.num_dsi_phy = 1,
};
@@ -508,8 +508,6 @@ static int dsi_pll_28nm_8960_init(struct msm_dsi_phy *phy)
}
pll = &pll_28nm->base;
- pll->min_rate = VCO_MIN_RATE;
- pll->max_rate = VCO_MAX_RATE;
pll->cfg = phy->cfg;
@@ -712,6 +710,8 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
.disable_seq = dsi_pll_28nm_disable_seq,
.enable_seq = dsi_pll_28nm_enable_seq,
},
+ .min_pll_rate = VCO_MIN_RATE,
+ .max_pll_rate = VCO_MAX_RATE,
.io_start = { 0x4700300, 0x5800300 },
.num_dsi_phy = 2,
};
@@ -886,14 +886,6 @@ static int dsi_pll_7nm_init(struct msm_dsi_phy *phy)
spin_lock_init(&pll_7nm->postdiv_lock);
pll = &pll_7nm->base;
- pll->min_rate = 1000000000UL;
- pll->max_rate = 3500000000UL;
- if (phy->cfg->type == MSM_DSI_PHY_7NM_V4_1) {
- pll->min_rate = 600000000UL;
- pll->max_rate = (unsigned long)5000000000ULL;
- /* workaround for max rate overflowing on 32-bit builds: */
- pll->max_rate = max(pll->max_rate, 0xffffffffUL);
- }
pll->cfg = phy->cfg;
pll_7nm->vco_delay = 1;
@@ -1165,6 +1157,8 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
.restore_state = dsi_pll_7nm_restore_state,
.set_usecase = dsi_pll_7nm_set_usecase,
},
+ .min_pll_rate = 1000000000UL,
+ .max_pll_rate = 3500000000UL,
.io_start = { 0xae94400, 0xae96400 },
.num_dsi_phy = 2,
};
@@ -1191,6 +1185,8 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = {
.restore_state = dsi_pll_7nm_restore_state,
.set_usecase = dsi_pll_7nm_set_usecase,
},
+ .min_pll_rate = 600000000UL,
+ .max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000ULL : ULONG_MAX,
.io_start = { 0xae94400, 0xae96400 },
.num_dsi_phy = 2,
};
@@ -14,10 +14,10 @@ long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw,
{
struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- if (rate < pll->min_rate)
- return pll->min_rate;
- else if (rate > pll->max_rate)
- return pll->max_rate;
+ if (rate < pll->cfg->min_pll_rate)
+ return pll->cfg->min_pll_rate;
+ else if (rate > pll->cfg->max_pll_rate)
+ return pll->cfg->max_pll_rate;
else
return rate;
}
@@ -18,9 +18,6 @@ struct msm_dsi_pll {
bool pll_on;
bool state_saved;
- unsigned long min_rate;
- unsigned long max_rate;
-
const struct msm_dsi_phy_cfg *cfg;
};
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 3 +++ drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 6 ++++-- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 6 ++++-- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 10 ++++++---- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 ++-- drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 12 ++++-------- drivers/gpu/drm/msm/dsi/phy/dsi_pll.c | 8 ++++---- drivers/gpu/drm/msm/dsi/phy/dsi_pll.h | 3 --- 8 files changed, 27 insertions(+), 25 deletions(-) -- 2.30.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel