@@ -160,7 +160,7 @@ struct msm_dsi_phy_clk_request {
void msm_dsi_phy_driver_register(void);
void msm_dsi_phy_driver_unregister(void);
-int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+int msm_dsi_phy_enable(struct msm_dsi_phy *phy,
struct msm_dsi_phy_clk_request *clk_req);
void msm_dsi_phy_disable(struct msm_dsi_phy *phy);
void msm_dsi_phy_get_shared_timings(struct msm_dsi_phy *phy,
@@ -109,7 +109,7 @@ static int dsi_mgr_setup_components(int id)
return ret;
}
-static int enable_phy(struct msm_dsi *msm_dsi, int src_pll_id,
+static int enable_phy(struct msm_dsi *msm_dsi,
struct msm_dsi_phy_shared_timings *shared_timings)
{
struct msm_dsi_phy_clk_request clk_req;
@@ -118,7 +118,7 @@ static int enable_phy(struct msm_dsi *msm_dsi, int src_pll_id,
msm_dsi_host_get_phy_clk_req(msm_dsi->host, &clk_req, is_dual_dsi);
- ret = msm_dsi_phy_enable(msm_dsi->phy, src_pll_id, &clk_req);
+ ret = msm_dsi_phy_enable(msm_dsi->phy, &clk_req);
msm_dsi_phy_get_shared_timings(msm_dsi->phy, shared_timings);
return ret;
@@ -131,7 +131,6 @@ dsi_mgr_phy_enable(int id,
struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
struct msm_dsi *mdsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER);
struct msm_dsi *sdsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE);
- int src_pll_id = IS_DUAL_DSI() ? DSI_CLOCK_MASTER : id;
int ret;
/* In case of dual DSI, some registers in PHY1 have been programmed
@@ -144,11 +143,11 @@ dsi_mgr_phy_enable(int id,
msm_dsi_host_reset_phy(mdsi->host);
msm_dsi_host_reset_phy(sdsi->host);
- ret = enable_phy(mdsi, src_pll_id,
+ ret = enable_phy(mdsi,
&shared_timings[DSI_CLOCK_MASTER]);
if (ret)
return ret;
- ret = enable_phy(sdsi, src_pll_id,
+ ret = enable_phy(sdsi,
&shared_timings[DSI_CLOCK_SLAVE]);
if (ret) {
msm_dsi_phy_disable(mdsi->phy);
@@ -157,7 +156,7 @@ dsi_mgr_phy_enable(int id,
}
} else {
msm_dsi_host_reset_phy(msm_dsi->host);
- ret = enable_phy(msm_dsi, src_pll_id, &shared_timings[id]);
+ ret = enable_phy(msm_dsi, &shared_timings[id]);
if (ret)
return ret;
}
@@ -753,7 +753,7 @@ void __exit msm_dsi_phy_driver_unregister(void)
platform_driver_unregister(&dsi_phy_platform_driver);
}
-int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+int msm_dsi_phy_enable(struct msm_dsi_phy *phy,
struct msm_dsi_phy_clk_request *clk_req)
{
struct device *dev = &phy->pdev->dev;
@@ -776,7 +776,7 @@ int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
goto reg_en_fail;
}
- ret = phy->cfg->ops.enable(phy, src_pll_id, clk_req);
+ ret = phy->cfg->ops.enable(phy, clk_req);
if (ret) {
DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret);
goto phy_en_fail;
@@ -19,7 +19,7 @@
struct msm_dsi_phy_ops {
int (*pll_init)(struct msm_dsi_phy *phy);
- int (*enable)(struct msm_dsi_phy *phy, int src_pll_id,
+ int (*enable)(struct msm_dsi_phy *phy,
struct msm_dsi_phy_clk_request *clk_req);
void (*disable)(struct msm_dsi_phy *phy);
void (*save_state)(struct msm_dsi_phy *phy);
@@ -786,7 +786,7 @@ static void dsi_phy_hw_v3_0_lane_settings(struct msm_dsi_phy *phy)
}
}
-static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy,
struct msm_dsi_phy_clk_request *clk_req)
{
int ret;
@@ -938,7 +938,7 @@ static void dsi_14nm_dphy_set_timing(struct msm_dsi_phy *phy,
DSI_14nm_PHY_LN_TIMING_CTRL_11_TRIG3_CMD(0xa0));
}
-static int dsi_14nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+static int dsi_14nm_phy_enable(struct msm_dsi_phy *phy,
struct msm_dsi_phy_clk_request *clk_req)
{
struct msm_dsi_dphy_timing *timing = &phy->timing;
@@ -996,7 +996,7 @@ static int dsi_14nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x00);
glbl_test_ctrl = dsi_phy_read(base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL);
- if (phy->id == DSI_1 && src_pll_id == DSI_0)
+ if (phy->usecase == MSM_DSI_PHY_SLAVE)
glbl_test_ctrl |= DSI_14nm_PHY_CMN_GLBL_TEST_CTRL_BITCLK_HS_SEL;
else
glbl_test_ctrl &= ~DSI_14nm_PHY_CMN_GLBL_TEST_CTRL_BITCLK_HS_SEL;
@@ -63,7 +63,7 @@ static void dsi_20nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_0, 0x03);
}
-static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy,
struct msm_dsi_phy_clk_request *clk_req)
{
struct msm_dsi_dphy_timing *timing = &phy->timing;
@@ -85,7 +85,7 @@ static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_0, 0xff);
val = dsi_phy_read(base + REG_DSI_20nm_PHY_GLBL_TEST_CTRL);
- if (src_pll_id == DSI_1)
+ if (phy->id == DSI_1 && phy->usecase == MSM_DSI_PHY_STANDALONE)
val |= DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL;
else
val &= ~DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL;
@@ -721,7 +721,7 @@ static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
dsi_28nm_phy_regulator_enable_dcdc(phy);
}
-static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy,
struct msm_dsi_phy_clk_request *clk_req)
{
struct msm_dsi_dphy_timing *timing = &phy->timing;
@@ -768,7 +768,7 @@ static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
val = dsi_phy_read(base + REG_DSI_28nm_PHY_GLBL_TEST_CTRL);
- if (phy->id == DSI_1 && src_pll_id == DSI_0)
+ if (phy->usecase == MSM_DSI_PHY_SLAVE)
val &= ~DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL;
else
val |= DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL;
@@ -585,7 +585,7 @@ static void dsi_28nm_phy_lane_config(struct msm_dsi_phy *phy)
dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR1, 0x88);
}
-static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy,
struct msm_dsi_phy_clk_request *clk_req)
{
struct msm_dsi_dphy_timing *timing = &phy->timing;
@@ -800,7 +800,7 @@ static void dsi_phy_hw_v4_0_lane_settings(struct msm_dsi_phy *phy)
}
}
-static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
struct msm_dsi_phy_clk_request *clk_req)
{
int ret;
Phy driver already knows the source PLL id basing on the set usecase and the current PLL id. Stop passing it to the phy_enable call. As a reminder, dsi manager will always use DSI 0 as a clock master in a slave mode, so PLL 0 is always a clocksource for DSI 0 and it is always a clocksource for DSI 1 too unless DSI 1 is used in the standalone mode. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/dsi/dsi.h | 2 +- drivers/gpu/drm/msm/dsi/dsi_manager.c | 11 +++++------ drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 4 ++-- drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 2 +- drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 2 +- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 4 ++-- drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c | 4 ++-- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 4 ++-- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 2 +- drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 2 +- 10 files changed, 18 insertions(+), 19 deletions(-) -- 2.30.2 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel