| Message ID | 1415361475-6218-11-git-send-email-peter.griffin@linaro.org |
|---|---|
| State | New |
| Headers | show |
Hi Peter, On 11/07/2014 12:57 PM, Peter Griffin wrote: > The stih410 has some additional usb controllers. This patch adds the > dt nodes which will enabled them to function correctly. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm/boot/dts/stih407.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi > index 967ec39..5e01db2 100644 > --- a/arch/arm/boot/dts/stih407.dtsi > +++ b/arch/arm/boot/dts/stih407.dtsi Shouldn't you create a new stih410.dtsi file, to clearly highlight these USB2 controller are not present on STiH407? If you create this file, you could also include the stih410-clocks.dtsi file in it. > @@ -321,5 +321,65 @@ > reset-names = "global", > "port"; > }; > + > + ohci0: usb@9a03c00 { > + compatible = "st,st-ohci-300x"; > + status = "disabled"; > + reg = <0x9a03c00 0x100>; > + interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, > + <&softreset STIH407_USB2_PORT0_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy0>; > + phy-names = "usb"; > + }; > + > + ehci0: usb@9a03e00 { > + compatible = "st,st-ehci-300x"; > + status = "disabled"; > + reg = <0x9a03e00 0x100>; > + interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb0>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, > + <&softreset STIH407_USB2_PORT0_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy0>; > + phy-names = "usb"; > + }; > + > + ohci1: usb@9a83c00 { > + compatible = "st,st-ohci-300x"; > + status = "disabled"; > + reg = <0x9a83c00 0x100>; > + interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, > + <&softreset STIH407_USB2_PORT1_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy1>; > + phy-names = "usb"; > + }; > + > + ehci1: usb@9a83e00 { > + compatible = "st,st-ehci-300x"; > + status = "disabled"; > + reg = <0x9a83e00 0x100>; > + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb1>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, > + <&softreset STIH407_USB2_PORT1_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy1>; > + phy-names = "usb"; > + }; > }; > }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 07 Nov 2014, Peter Griffin wrote: > The stih410 has some additional usb controllers. This patch adds the > dt nodes which will enabled them to function correctly. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm/boot/dts/stih407.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi > index 967ec39..5e01db2 100644 > --- a/arch/arm/boot/dts/stih407.dtsi > +++ b/arch/arm/boot/dts/stih407.dtsi > @@ -321,5 +321,65 @@ > reset-names = "global", > "port"; > }; > + > + ohci0: usb@9a03c00 { > + compatible = "st,st-ohci-300x"; > + status = "disabled"; Being picky, I like to see the node status at the bottom in clear view, but apart from that patch looks good: Acked-by: Lee Jones <lee.jones@linaro.org> > + reg = <0x9a03c00 0x100>; > + interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, > + <&softreset STIH407_USB2_PORT0_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy0>; > + phy-names = "usb"; > + }; > + > + ehci0: usb@9a03e00 { > + compatible = "st,st-ehci-300x"; > + status = "disabled"; > + reg = <0x9a03e00 0x100>; > + interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb0>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, > + <&softreset STIH407_USB2_PORT0_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy0>; > + phy-names = "usb"; > + }; > + > + ohci1: usb@9a83c00 { > + compatible = "st,st-ohci-300x"; > + status = "disabled"; > + reg = <0x9a83c00 0x100>; > + interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, > + <&softreset STIH407_USB2_PORT1_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy1>; > + phy-names = "usb"; > + }; > + > + ehci1: usb@9a83e00 { > + compatible = "st,st-ehci-300x"; > + status = "disabled"; > + reg = <0x9a83e00 0x100>; > + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb1>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, > + <&softreset STIH407_USB2_PORT1_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy1>; > + phy-names = "usb"; > + }; > }; > };
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 967ec39..5e01db2 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -321,5 +321,65 @@ reset-names = "global", "port"; }; + + ohci0: usb@9a03c00 { + compatible = "st,st-ohci-300x"; + status = "disabled"; + reg = <0x9a03c00 0x100>; + interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, + <&softreset STIH407_USB2_PORT0_SOFTRESET>; + reset-names = "power", "softreset"; + + phys = <&usb2_picophy0>; + phy-names = "usb"; + }; + + ehci0: usb@9a03e00 { + compatible = "st,st-ehci-300x"; + status = "disabled"; + reg = <0x9a03e00 0x100>; + interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, + <&softreset STIH407_USB2_PORT0_SOFTRESET>; + reset-names = "power", "softreset"; + + phys = <&usb2_picophy0>; + phy-names = "usb"; + }; + + ohci1: usb@9a83c00 { + compatible = "st,st-ohci-300x"; + status = "disabled"; + reg = <0x9a83c00 0x100>; + interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, + <&softreset STIH407_USB2_PORT1_SOFTRESET>; + reset-names = "power", "softreset"; + + phys = <&usb2_picophy1>; + phy-names = "usb"; + }; + + ehci1: usb@9a83e00 { + compatible = "st,st-ehci-300x"; + status = "disabled"; + reg = <0x9a83e00 0x100>; + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, + <&softreset STIH407_USB2_PORT1_SOFTRESET>; + reset-names = "power", "softreset"; + + phys = <&usb2_picophy1>; + phy-names = "usb"; + }; }; };
The stih410 has some additional usb controllers. This patch adds the dt nodes which will enabled them to function correctly. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- arch/arm/boot/dts/stih407.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)