@@ -507,12 +507,27 @@ void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
}
EXPORT_SYMBOL(b53_imp_vlan_setup);
+static void b53_port_set_learning(struct b53_device *dev, int port,
+ bool learning)
+{
+ u16 reg;
+
+ b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, ®);
+ if (learning)
+ reg &= ~BIT(port);
+ else
+ reg |= BIT(port);
+ b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
+}
+
int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
{
struct b53_device *dev = ds->priv;
unsigned int cpu_port = ds->ports[port].cpu_dp->index;
u16 pvlan;
+ b53_port_set_learning(dev, port, false);
+
/* Clear the Rx and Tx disable bits and set to no spanning tree */
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
@@ -620,6 +635,7 @@ static void b53_enable_cpu_port(struct b53_device *dev, int port)
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
b53_brcm_hdr_setup(dev->ds, port);
+ b53_port_set_learning(dev, port, false);
}
static void b53_enable_mib(struct b53_device *dev)
@@ -1517,6 +1533,8 @@ int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
dev->ports[port].vlan_ctl_mask = pvlan;
+ b53_port_set_learning(dev, port, true);
+
return 0;
}
EXPORT_SYMBOL(b53_br_join);
@@ -1564,6 +1582,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
vl->untag |= BIT(port) | BIT(cpu_port);
b53_set_vlan_entry(dev, pvid, vl);
}
+ b53_port_set_learning(dev, port, false);
}
EXPORT_SYMBOL(b53_br_leave);
@@ -115,6 +115,7 @@
#define B53_UC_FLOOD_MASK 0x32
#define B53_MC_FLOOD_MASK 0x34
#define B53_IPMC_FLOOD_MASK 0x36
+#define B53_DIS_LEARNING 0x3c
/*
* Override Ports 0-7 State on devices with xMII interfaces (8 bit)
@@ -173,11 +173,6 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
reg &= ~P_TXQ_PSM_VDD(port);
core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
- /* Enable learning */
- reg = core_readl(priv, CORE_DIS_LEARN);
- reg &= ~BIT(port);
- core_writel(priv, reg, CORE_DIS_LEARN);
-
/* Enable Broadcom tags for that port if requested */
if (priv->brcm_tag_mask & BIT(port))
b53_brcm_hdr_setup(ds, port);
Standalone ports should not have learning enabled since all the frames are always copied to the CPU port. This is particularly important in case an user-facing port intentionally spoofs the CPU port's MAC address. With learning enabled we would end up with the switch having incorrectly learned the address of the CPU port which typically results in a complete break down of network connectivity until the address learned ages out and gets re-learned, from the correct port this time. There was no control of the BR_LEARNING flag until upstream commit 4098ced4680a485c5953f60ac63dff19f3fb3d42 ("Merge branch 'brport-flags'") which is why we default to enabling learning when the ports gets added as a bridge member. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/dsa/b53/b53_common.c | 19 +++++++++++++++++++ drivers/net/dsa/b53/b53_regs.h | 1 + drivers/net/dsa/bcm_sf2.c | 5 ----- 3 files changed, 20 insertions(+), 5 deletions(-)