[v2,2/6] phy: qcom-qmp: move DP functions to callbacks

Message ID	20210318141144.2147610-3-dmitry.baryshkov@linaro.org
State	Superseded
Headers	show Delivered-To: patch@linaro.org Received-SPF: pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Vinod Koul <vkoul@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com>, Rob Herring <robh+dt@kernel.org> Cc: Manu Gautam <mgautam@codeaurora.org>, Stephen Boyd <sboyd@kernel.org>, Jonathan Marek <jonathan@marek.ca>, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v2 2/6] phy: qcom-qmp: move DP functions to callbacks Date: Thu, 18 Mar 2021 17:11:40 +0300 Message-Id: <20210318141144.2147610-3-dmitry.baryshkov@linaro.org> In-Reply-To: <20210318141144.2147610-1-dmitry.baryshkov@linaro.org> References: <20210318141144.2147610-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	phy: qcom-qmp: provide DP phy support for sm8250 \| expand [v2,0/6] phy: qcom-qmp: provide DP phy support for sm8250 [v2,1/6] dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250 [v2,2/6] phy: qcom-qmp: move DP functions to callbacks [v2,3/6] phy: qcom-qmp: rename common registers [v2,4/6] phy: qcom-qmp: add support for sm8250-usb3-dp phy [v2,5/6] arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode [v2,6/6] arm64: dts: qcom: use dp_phy to provide clocks to dispcc

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 9cdebe7f26cb..4150096fd350 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -2268,6 +2268,8 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21), }; +struct qmp_phy; + /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { /* phy-type - PCIE/UFS/USB */ @@ -2307,6 +2309,12 @@ struct qmp_phy_cfg { const struct qmp_phy_init_tbl *serdes_tbl_hbr3; int serdes_tbl_hbr3_num; + /* DP PHY callbacks */ + int (*configure_dp_phy)(struct qmp_phy *qphy); + void (*configure_dp_tx)(struct qmp_phy *qphy); + int (*calibrate_dp_phy)(struct qmp_phy *qphy); + void (*dp_aux_init)(struct qmp_phy *qphy); + /* clock ids to be requested */ const char * const *clk_list; int num_clks; @@ -2423,6 +2431,216 @@ struct qcom_qmp { struct reset_control *ufs_reset; }; +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy) +{ + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, + qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + /* Turn on BIAS current for PHY/PLL */ + writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX | + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL, + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN); + + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_LANE_0_1_PWRDN | + DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN | + DP_PHY_PD_CTL_DP_CLAMP_EN, + qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + writel(QSERDES_V3_COM_BIAS_EN | + QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN | + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL | + QSERDES_V3_COM_CLKBUF_RX_DRIVE_L, + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN); + + writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG0); + writel(0x13, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1); + writel(0x24, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2); + writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG3); + writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG4); + writel(0x26, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG5); + writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG6); + writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG7); + writel(0xbb, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG8); + writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG9); + qphy->dp_aux_cfg = 0; + + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK | + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK | + PHY_AUX_REQ_ERR_MASK, + qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK); +} + +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = { + { 0x00, 0x0c, 0x14, 0x19 }, + { 0x00, 0x0b, 0x12, 0xff }, + { 0x00, 0x0b, 0xff, 0xff }, + { 0x04, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { + { 0x08, 0x0f, 0x16, 0x1f }, + { 0x11, 0x1e, 0x1f, 0xff }, + { 0x19, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy) +{ + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + unsigned int v_level = 0, p_level = 0; + u32 bias_en, drvr_en; + u8 voltage_swing_cfg, pre_emphasis_cfg; + int i; + + for (i = 0; i < dp_opts->lanes; i++) { + v_level = max(v_level, dp_opts->voltage[i]); + p_level = max(p_level, dp_opts->pre[i]); + } + + if (dp_opts->lanes == 1) { + bias_en = 0x3e; + drvr_en = 0x13; + } else { + bias_en = 0x3f; + drvr_en = 0x10; + } + + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; + + /* TODO: Move check to config check */ + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) + return; + + /* Enable MUX to use Cursor values from these registers */ + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; + + writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL); + writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL); + writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL); + writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL); + + writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN); + writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); + writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN); + writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); +} + +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy) +{ + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks; + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + u32 val, phy_vco_div, status; + unsigned long pixel_freq; + + val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN; + + /* + * TODO: Assume orientation is CC1 for now and two lanes, need to + * use type-c connector to understand orientation and lanes. + * + * Otherwise val changes to be like below if this code understood + * the orientation of the type-c cable. + * + * if (lane_cnt == 4 || orientation == ORIENTATION_CC2) + * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN; + * if (lane_cnt == 4 || orientation == ORIENTATION_CC1) + * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN; + * if (orientation == ORIENTATION_CC2) + * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE); + */ + val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN; + writel(val, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + writel(0x5c, qphy->pcs + QSERDES_V3_DP_PHY_MODE); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL); + + switch (dp_opts->link_rate) { + case 1620: + phy_vco_div = 0x1; + pixel_freq = 1620000000UL / 2; + break; + case 2700: + phy_vco_div = 0x1; + pixel_freq = 2700000000UL / 2; + break; + case 5400: + phy_vco_div = 0x2; + pixel_freq = 5400000000UL / 4; + break; + case 8100: + phy_vco_div = 0x0; + pixel_freq = 8100000000UL / 6; + break; + default: + /* Other link rates aren't supported */ + return -EINVAL; + } + writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV); + + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000); + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq); + + writel(0x04, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2); + writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + writel(0x09, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + + writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL); + + if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS, + status, + ((status & BIT(0)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + + if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + writel(0x18, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + udelay(2000); + writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + + return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000); +} + +/* + * We need to calibrate the aux setting here as many times + * as the caller tries + */ +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy) +{ + static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d }; + u8 val; + + qphy->dp_aux_cfg++; + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings); + val = cfg1_settings[qphy->dp_aux_cfg]; + + writel(val, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1); + + return 0; +} + static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) { u32 reg; @@ -2871,6 +3089,11 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = { .has_phy_dp_com_ctrl = true, .is_dual_lane_phy = true, + + .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init, + .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx, + .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy, + .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate, }; static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = { @@ -3332,227 +3555,28 @@ static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy) return 0; } -static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy) -{ - writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | - DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, - qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); - - /* Turn on BIAS current for PHY/PLL */ - writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX | - QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL, - qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN); - - writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); - - writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | - DP_PHY_PD_CTL_LANE_0_1_PWRDN | - DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN | - DP_PHY_PD_CTL_DP_CLAMP_EN, - qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); - - writel(QSERDES_V3_COM_BIAS_EN | - QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN | - QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL | - QSERDES_V3_COM_CLKBUF_RX_DRIVE_L, - qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN); - - writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG0); - writel(0x13, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1); - writel(0x24, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2); - writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG3); - writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG4); - writel(0x26, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG5); - writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG6); - writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG7); - writel(0xbb, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG8); - writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG9); - qphy->dp_aux_cfg = 0; - - writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK | - PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK | - PHY_AUX_REQ_ERR_MASK, - qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK); -} - -static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = { - { 0x00, 0x0c, 0x14, 0x19 }, - { 0x00, 0x0b, 0x12, 0xff }, - { 0x00, 0x0b, 0xff, 0xff }, - { 0x04, 0xff, 0xff, 0xff } -}; - -static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { - { 0x08, 0x0f, 0x16, 0x1f }, - { 0x11, 0x1e, 0x1f, 0xff }, - { 0x19, 0x1f, 0xff, 0xff }, - { 0x1f, 0xff, 0xff, 0xff } -}; - -static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy) -{ - const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; - unsigned int v_level = 0, p_level = 0; - u32 bias_en, drvr_en; - u8 voltage_swing_cfg, pre_emphasis_cfg; - int i; - - for (i = 0; i < dp_opts->lanes; i++) { - v_level = max(v_level, dp_opts->voltage[i]); - p_level = max(p_level, dp_opts->pre[i]); - } - - if (dp_opts->lanes == 1) { - bias_en = 0x3e; - drvr_en = 0x13; - } else { - bias_en = 0x3f; - drvr_en = 0x10; - } - - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; - - /* TODO: Move check to config check */ - if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) - return; - - /* Enable MUX to use Cursor values from these registers */ - voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; - pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; - - writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL); - writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL); - writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL); - writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL); - - writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN); - writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); - writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN); - writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); -} - static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts) { const struct phy_configure_opts_dp *dp_opts = &opts->dp; struct qmp_phy *qphy = phy_get_drvdata(phy); + const struct qmp_phy_cfg *cfg = qphy->cfg; memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts)); if (qphy->dp_opts.set_voltages) { - qcom_qmp_phy_configure_dp_tx(qphy); + cfg->configure_dp_tx(qphy); qphy->dp_opts.set_voltages = 0; } return 0; } -static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy) -{ - const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks; - const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; - u32 val, phy_vco_div, status; - unsigned long pixel_freq; - - val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | - DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN; - - /* - * TODO: Assume orientation is CC1 for now and two lanes, need to - * use type-c connector to understand orientation and lanes. - * - * Otherwise val changes to be like below if this code understood - * the orientation of the type-c cable. - * - * if (lane_cnt == 4 || orientation == ORIENTATION_CC2) - * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN; - * if (lane_cnt == 4 || orientation == ORIENTATION_CC1) - * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN; - * if (orientation == ORIENTATION_CC2) - * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE); - */ - val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN; - writel(val, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); - - writel(0x5c, qphy->pcs + QSERDES_V3_DP_PHY_MODE); - writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL); - writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL); - - switch (dp_opts->link_rate) { - case 1620: - phy_vco_div = 0x1; - pixel_freq = 1620000000UL / 2; - break; - case 2700: - phy_vco_div = 0x1; - pixel_freq = 2700000000UL / 2; - break; - case 5400: - phy_vco_div = 0x2; - pixel_freq = 5400000000UL / 4; - break; - case 8100: - phy_vco_div = 0x0; - pixel_freq = 8100000000UL / 6; - break; - default: - /* Other link rates aren't supported */ - return -EINVAL; - } - writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV); - - clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000); - clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq); - - writel(0x04, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2); - writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG); - writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_CFG); - writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG); - writel(0x09, qphy->pcs + QSERDES_V3_DP_PHY_CFG); - - writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL); - - if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS, - status, - ((status & BIT(0)) > 0), - 500, - 10000)) - return -ETIMEDOUT; - - writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG); - - if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS, - status, - ((status & BIT(1)) > 0), - 500, - 10000)) - return -ETIMEDOUT; - - writel(0x18, qphy->pcs + QSERDES_V3_DP_PHY_CFG); - udelay(2000); - writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG); - - return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS, - status, - ((status & BIT(1)) > 0), - 500, - 10000); -} - -/* - * We need to calibrate the aux setting here as many times - * as the caller tries - */ static int qcom_qmp_dp_phy_calibrate(struct phy *phy) { struct qmp_phy *qphy = phy_get_drvdata(phy); - static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d }; - u8 val; - - qphy->dp_aux_cfg++; - qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings); - val = cfg1_settings[qphy->dp_aux_cfg]; + const struct qmp_phy_cfg *cfg = qphy->cfg; - writel(val, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1); + if (cfg->calibrate_dp_phy) + return cfg->calibrate_dp_phy(qphy); return 0; } @@ -3729,7 +3753,7 @@ static int qcom_qmp_phy_init(struct phy *phy) return ret; if (cfg->type == PHY_TYPE_DP) - qcom_qmp_phy_dp_aux_init(qphy); + cfg->dp_aux_init(qphy); return 0; } @@ -3783,7 +3807,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy) /* Configure special DP tx tunings */ if (cfg->type == PHY_TYPE_DP) - qcom_qmp_phy_configure_dp_tx(qphy); + cfg->configure_dp_tx(qphy); qcom_qmp_phy_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1); @@ -3802,7 +3826,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy) /* Configure link rate, swing, etc. */ if (cfg->type == PHY_TYPE_DP) { - qcom_qmp_phy_configure_dp_phy(qphy); + cfg->configure_dp_phy(qphy); } else { qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); if (cfg->pcs_tbl_sec)

[v2,2/6] phy: qcom-qmp: move DP functions to callbacks

Commit Message

Patch