diff mbox

[v11,23/26] target-arm: make VBAR banked

Message ID 1416242878-876-24-git-send-email-greg.bellows@linaro.org
State Superseded
Headers show

Commit Message

Greg Bellows Nov. 17, 2014, 4:47 p.m. UTC 
When EL3 is running in Aarch32 (or ARMv7 with Security Extensions)
VBAR has a secure and a non-secure instance, which are mapped to
VBAR_EL1 and VBAR_EL3.

Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

---

v8 -> v9
- Revert unnecessary CPreg definition changes

v5 -> v6
- Changed _el field variants to be array based
- Merged VBAR and VBAR_EL1 reginfo entries

v3 -> v4
- Fix vbar union/structure definition
- Revert back to array-based vbar definition combined with v7 naming
---
 target-arm/cpu.h    | 10 +++++++++-
 target-arm/helper.c |  5 +++--
 2 files changed, 12 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 2f8d607..fc64497 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -297,7 +297,15 @@  typedef struct CPUARMState {
         uint32_t c9_pmuserenr; /* perf monitor user enable */
         uint32_t c9_pminten; /* perf monitor interrupt enables */
         uint64_t mair_el1;
-        uint64_t vbar_el[4]; /* vector base address register */
+        union { /* vector base address register */
+            struct {
+                uint64_t _unused_vbar;
+                uint64_t vbar_ns;
+                uint64_t hvbar;
+                uint64_t vbar_s;
+            };
+            uint64_t vbar_el[4];
+        };
         uint32_t mvbar; /* (monitor) vector base address register */
         uint32_t c13_fcse; /* FCSE PID.  */
         uint64_t contextidr_el1; /* Context ID.  */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 081c00e..69f2e68 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -911,7 +911,8 @@  static const ARMCPRegInfo v7_cp_reginfo[] = {
     { .name = "VBAR", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0,
       .access = PL1_RW, .writefn = vbar_write,
-      .fieldoffset = offsetof(CPUARMState, cp15.vbar_el[1]),
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.vbar_s),
+                             offsetof(CPUARMState, cp15.vbar_ns) },
       .resetvalue = 0 },
     { .name = "CCSIDR", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0,
@@ -4401,7 +4402,7 @@  void arm_cpu_do_interrupt(CPUState *cs)
          * This register is only followed in non-monitor mode, and is banked.
          * Note: only bits 31:5 are valid.
          */
-        addr += env->cp15.vbar_el[1];
+        addr += A32_BANKED_CURRENT_REG_GET(env, vbar);
     }
 
     if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON) {