| Message ID | 20210331091616.2306-3-thunder.leizhen@huawei.com |
|---|---|
| State | New |
| Headers | show |
| Series | clean up dt_binding_check and dtbs_check warnings of renesas,rsnd.yaml | expand |
On Wed, Mar 31, 2021 at 05:16:16PM +0800, Zhen Lei wrote: > Currently, if there are more than two ports, or if there is only one port > but other properties(such as "#address-cells") is required, these ports > are placed under the "ports" node. So add the schema of property "ports". A given binding should just use 'ports' or 'port' depending on it's need. Supporting both forms is needless complexity. > Otherwise, warnings similar to the following will be reported: > arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dt.yaml: \ > sound@ec500000: 'ports' does not match any of the regexes: \ > '^rcar_sound,ctu$', '^rcar_sound,dai$', '^rcar_sound,dvc$', ... > > Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> > --- > Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml > index 384191ee497f534..a42992fa687d3f3 100644 > --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml > +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml > @@ -115,6 +115,11 @@ properties: > $ref: audio-graph-port.yaml# > unevaluatedProperties: false > > + ports: $ref: /schemas/graph.yaml#/properties/ports > + patternProperties: > + '^port@[0-9]': > + $ref: "#/properties/port" Then this should be: $ref: audio-graph-port.yaml# Also, what each port is should be defined, but that's a separate problem. > + > # use patternProperties to avoid naming "xxx,yyy" issue > patternProperties: > "^rcar_sound,dvc$": > -- > 1.8.3 > >
On 2021/4/2 4:20, Rob Herring wrote: > On Wed, Mar 31, 2021 at 05:16:16PM +0800, Zhen Lei wrote: >> Currently, if there are more than two ports, or if there is only one port >> but other properties(such as "#address-cells") is required, these ports >> are placed under the "ports" node. So add the schema of property "ports". > > A given binding should just use 'ports' or 'port' depending on it's > need. Supporting both forms is needless complexity. Right, I'll adjust this patch again. > >> Otherwise, warnings similar to the following will be reported: >> arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dt.yaml: \ >> sound@ec500000: 'ports' does not match any of the regexes: \ >> '^rcar_sound,ctu$', '^rcar_sound,dai$', '^rcar_sound,dvc$', ... >> >> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> >> --- >> Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml >> index 384191ee497f534..a42992fa687d3f3 100644 >> --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml >> +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml >> @@ -115,6 +115,11 @@ properties: >> $ref: audio-graph-port.yaml# >> unevaluatedProperties: false >> >> + ports: > > $ref: /schemas/graph.yaml#/properties/ports OK, thanks > >> + patternProperties: >> + '^port@[0-9]': >> + $ref: "#/properties/port" > > Then this should be: $ref: audio-graph-port.yaml# OK, thanks > > Also, what each port is should be defined, but that's a separate > problem. > >> + >> # use patternProperties to avoid naming "xxx,yyy" issue >> patternProperties: >> "^rcar_sound,dvc$": >> -- >> 1.8.3 >> >> > > . >
On 2021/4/7 10:04, Leizhen (ThunderTown) wrote: > > > On 2021/4/2 4:20, Rob Herring wrote: >> On Wed, Mar 31, 2021 at 05:16:16PM +0800, Zhen Lei wrote: >>> Currently, if there are more than two ports, or if there is only one port >>> but other properties(such as "#address-cells") is required, these ports >>> are placed under the "ports" node. So add the schema of property "ports". >> >> A given binding should just use 'ports' or 'port' depending on it's >> need. Supporting both forms is needless complexity. Hi Rob: I don't think of a good way to avoid "port" and "ports" to be used at the same time. Should I disable the use of "port"? Convert the two usages of "port" into "ports". But usually no one will use both of them in one dts file. And even if it's used at the same time, it's not a big mistake. So I decided not to test it. > > Right, I'll adjust this patch again. > >> >>> Otherwise, warnings similar to the following will be reported: >>> arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dt.yaml: \ >>> sound@ec500000: 'ports' does not match any of the regexes: \ >>> '^rcar_sound,ctu$', '^rcar_sound,dai$', '^rcar_sound,dvc$', ... >>> >>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> >>> --- >>> Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 5 +++++ >>> 1 file changed, 5 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml >>> index 384191ee497f534..a42992fa687d3f3 100644 >>> --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml >>> +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml >>> @@ -115,6 +115,11 @@ properties: >>> $ref: audio-graph-port.yaml# >>> unevaluatedProperties: false >>> >>> + ports: >> >> $ref: /schemas/graph.yaml#/properties/ports > > OK, thanks > >> >>> + patternProperties: >>> + '^port@[0-9]': >>> + $ref: "#/properties/port" >> >> Then this should be: $ref: audio-graph-port.yaml# > > OK, thanks > >> >> Also, what each port is should be defined, but that's a separate >> problem. >> >>> + >>> # use patternProperties to avoid naming "xxx,yyy" issue >>> patternProperties: >>> "^rcar_sound,dvc$": >>> -- >>> 1.8.3 >>> >>> >> >> . >>
On Thu, Apr 08, 2021 at 08:28:08PM +0800, Leizhen (ThunderTown) wrote: > > > On 2021/4/7 10:04, Leizhen (ThunderTown) wrote: > > > > > > On 2021/4/2 4:20, Rob Herring wrote: > >> On Wed, Mar 31, 2021 at 05:16:16PM +0800, Zhen Lei wrote: > >>> Currently, if there are more than two ports, or if there is only one port > >>> but other properties(such as "#address-cells") is required, these ports > >>> are placed under the "ports" node. So add the schema of property "ports". > >> > >> A given binding should just use 'ports' or 'port' depending on it's > >> need. Supporting both forms is needless complexity. > > Hi Rob: > I don't think of a good way to avoid "port" and "ports" to be used at the same time. > Should I disable the use of "port"? Convert the two usages of "port" into "ports". > But usually no one will use both of them in one dts file. And even if it's used at > the same time, it's not a big mistake. So I decided not to test it. I think the Renesas folks need to comment on this. Rob
On 2021/4/9 4:42, Rob Herring wrote: > On Thu, Apr 08, 2021 at 08:28:08PM +0800, Leizhen (ThunderTown) wrote: >> >> >> On 2021/4/7 10:04, Leizhen (ThunderTown) wrote: >>> >>> >>> On 2021/4/2 4:20, Rob Herring wrote: >>>> On Wed, Mar 31, 2021 at 05:16:16PM +0800, Zhen Lei wrote: >>>>> Currently, if there are more than two ports, or if there is only one port >>>>> but other properties(such as "#address-cells") is required, these ports >>>>> are placed under the "ports" node. So add the schema of property "ports". >>>> >>>> A given binding should just use 'ports' or 'port' depending on it's >>>> need. Supporting both forms is needless complexity. >> >> Hi Rob: >> I don't think of a good way to avoid "port" and "ports" to be used at the same time. >> Should I disable the use of "port"? Convert the two usages of "port" into "ports". >> But usually no one will use both of them in one dts file. And even if it's used at >> the same time, it's not a big mistake. So I decided not to test it. > > I think the Renesas folks need to comment on this. Hi All: I've figured out a way to avoid both. I'll send v3 right away. > > Rob > > . >
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 384191ee497f534..a42992fa687d3f3 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -115,6 +115,11 @@ properties: $ref: audio-graph-port.yaml# unevaluatedProperties: false + ports: + patternProperties: + '^port@[0-9]': + $ref: "#/properties/port" + # use patternProperties to avoid naming "xxx,yyy" issue patternProperties: "^rcar_sound,dvc$":
Currently, if there are more than two ports, or if there is only one port but other properties(such as "#address-cells") is required, these ports are placed under the "ports" node. So add the schema of property "ports". Otherwise, warnings similar to the following will be reported: arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dt.yaml: \ sound@ec500000: 'ports' does not match any of the regexes: \ '^rcar_sound,ctu$', '^rcar_sound,dai$', '^rcar_sound,dvc$', ... Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> --- Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 5 +++++ 1 file changed, 5 insertions(+) -- 1.8.3