@@ -1,3 +1,4 @@
ifeq ($(CONFIG_LINUX), y)
+obj-$(CONFIG_SOFTMMU) += common.o
obj-$(CONFIG_PCI) += pci.o
endif
new file mode 100644
@@ -0,0 +1,959 @@
+/*
+ * generic functions used by VFIO devices
+ *
+ * Copyright Red Hat, Inc. 2012
+ *
+ * Authors:
+ * Alex Williamson <alex.williamson@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ * Based on qemu-kvm device-assignment:
+ * Adapted for KVM by Qumranet.
+ * Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com)
+ * Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com)
+ * Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com)
+ * Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com)
+ * Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com)
+ */
+
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <linux/vfio.h>
+
+#include "hw/vfio/vfio-common.h"
+#include "hw/vfio/vfio.h"
+#include "exec/address-spaces.h"
+#include "exec/memory.h"
+#include "hw/hw.h"
+#include "qemu/error-report.h"
+#include "sysemu/kvm.h"
+#include "trace.h"
+
+struct vfio_group_head vfio_group_list =
+ QLIST_HEAD_INITIALIZER(vfio_address_spaces);
+struct vfio_as_head vfio_address_spaces =
+ QLIST_HEAD_INITIALIZER(vfio_address_spaces);
+
+#ifdef CONFIG_KVM
+/*
+ * We have a single VFIO pseudo device per KVM VM. Once created it lives
+ * for the life of the VM. Closing the file descriptor only drops our
+ * reference to it and the device's reference to kvm. Therefore once
+ * initialized, this file descriptor is only released on QEMU exit and
+ * we'll re-use it should another vfio device be attached before then.
+ */
+static int vfio_kvm_device_fd = -1;
+#endif
+
+/*
+ * Common VFIO interrupt disable
+ */
+void vfio_disable_irqindex(VFIODevice *vbasedev, int index)
+{
+ struct vfio_irq_set irq_set = {
+ .argsz = sizeof(irq_set),
+ .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER,
+ .index = index,
+ .start = 0,
+ .count = 0,
+ };
+
+ ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
+}
+
+void vfio_unmask_single_irqindex(VFIODevice *vbasedev, int index)
+{
+ struct vfio_irq_set irq_set = {
+ .argsz = sizeof(irq_set),
+ .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK,
+ .index = index,
+ .start = 0,
+ .count = 1,
+ };
+
+ ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
+}
+
+void vfio_mask_single_irqindex(VFIODevice *vbasedev, int index)
+{
+ struct vfio_irq_set irq_set = {
+ .argsz = sizeof(irq_set),
+ .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_MASK,
+ .index = index,
+ .start = 0,
+ .count = 1,
+ };
+
+ ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
+}
+
+/*
+ * IO Port/MMIO - Beware of the endians, VFIO is always little endian
+ */
+void vfio_region_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
+{
+ VFIORegion *region = opaque;
+ VFIODevice *vbasedev = region->vbasedev;
+ union {
+ uint8_t byte;
+ uint16_t word;
+ uint32_t dword;
+ uint64_t qword;
+ } buf;
+
+ switch (size) {
+ case 1:
+ buf.byte = data;
+ break;
+ case 2:
+ buf.word = cpu_to_le16(data);
+ break;
+ case 4:
+ buf.dword = cpu_to_le32(data);
+ break;
+ default:
+ hw_error("vfio: unsupported write size, %d bytes", size);
+ break;
+ }
+
+ if (pwrite(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) {
+ error_report("%s(%s:region%d+0x%"HWADDR_PRIx", 0x%"PRIx64
+ ",%d) failed: %m",
+ __func__, vbasedev->name, region->nr,
+ addr, data, size);
+ }
+
+ trace_vfio_region_write(vbasedev->name, region->nr, addr, data, size);
+
+ /*
+ * A read or write to a BAR always signals an INTx EOI. This will
+ * do nothing if not pending (including not in INTx mode). We assume
+ * that a BAR access is in response to an interrupt and that BAR
+ * accesses will service the interrupt. Unfortunately, we don't know
+ * which access will service the interrupt, so we're potentially
+ * getting quite a few host interrupts per guest interrupt.
+ */
+ vbasedev->ops->vfio_eoi(vbasedev);
+}
+
+uint64_t vfio_region_read(void *opaque,
+ hwaddr addr, unsigned size)
+{
+ VFIORegion *region = opaque;
+ VFIODevice *vbasedev = region->vbasedev;
+ union {
+ uint8_t byte;
+ uint16_t word;
+ uint32_t dword;
+ uint64_t qword;
+ } buf;
+ uint64_t data = 0;
+
+ if (pread(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) {
+ error_report("%s(%s:region%d+0x%"HWADDR_PRIx", %d) failed: %m",
+ __func__, vbasedev->name, region->nr,
+ addr, size);
+ return (uint64_t)-1;
+ }
+ switch (size) {
+ case 1:
+ data = buf.byte;
+ break;
+ case 2:
+ data = le16_to_cpu(buf.word);
+ break;
+ case 4:
+ data = le32_to_cpu(buf.dword);
+ break;
+ default:
+ hw_error("vfio: unsupported read size, %d bytes", size);
+ break;
+ }
+
+ trace_vfio_region_read(vbasedev->name, region->nr, addr, size, data);
+
+ /* Same as write above */
+ vbasedev->ops->vfio_eoi(vbasedev);
+
+ return data;
+}
+
+const MemoryRegionOps vfio_region_ops = {
+ .read = vfio_region_read,
+ .write = vfio_region_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+/*
+ * DMA - Mapping and unmapping for the "type1" IOMMU interface used on x86
+ */
+static int vfio_dma_unmap(VFIOContainer *container,
+ hwaddr iova, ram_addr_t size)
+{
+ struct vfio_iommu_type1_dma_unmap unmap = {
+ .argsz = sizeof(unmap),
+ .flags = 0,
+ .iova = iova,
+ .size = size,
+ };
+
+ if (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) {
+ error_report("VFIO_UNMAP_DMA: %d\n", -errno);
+ return -errno;
+ }
+
+ return 0;
+}
+
+static int vfio_dma_map(VFIOContainer *container, hwaddr iova,
+ ram_addr_t size, void *vaddr, bool readonly)
+{
+ struct vfio_iommu_type1_dma_map map = {
+ .argsz = sizeof(map),
+ .flags = VFIO_DMA_MAP_FLAG_READ,
+ .vaddr = (__u64)(uintptr_t)vaddr,
+ .iova = iova,
+ .size = size,
+ };
+
+ if (!readonly) {
+ map.flags |= VFIO_DMA_MAP_FLAG_WRITE;
+ }
+
+ /*
+ * Try the mapping, if it fails with EBUSY, unmap the region and try
+ * again. This shouldn't be necessary, but we sometimes see it in
+ * the the VGA ROM space.
+ */
+ if (ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0 ||
+ (errno == EBUSY && vfio_dma_unmap(container, iova, size) == 0 &&
+ ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0)) {
+ return 0;
+ }
+
+ error_report("VFIO_MAP_DMA: %d\n", -errno);
+ return -errno;
+}
+
+static bool vfio_listener_skipped_section(MemoryRegionSection *section)
+{
+ return (!memory_region_is_ram(section->mr) &&
+ !memory_region_is_iommu(section->mr)) ||
+ /*
+ * Sizing an enabled 64-bit BAR can cause spurious mappings to
+ * addresses in the upper part of the 64-bit address space. These
+ * are never accessed by the CPU and beyond the address width of
+ * some IOMMU hardware. TODO: VFIO should tell us the IOMMU width.
+ */
+ section->offset_within_address_space & (1ULL << 63);
+}
+
+static void vfio_iommu_map_notify(Notifier *n, void *data)
+{
+ VFIOGuestIOMMU *giommu = container_of(n, VFIOGuestIOMMU, n);
+ VFIOContainer *container = giommu->container;
+ IOMMUTLBEntry *iotlb = data;
+ MemoryRegion *mr;
+ hwaddr xlat;
+ hwaddr len = iotlb->addr_mask + 1;
+ void *vaddr;
+ int ret;
+
+ trace_vfio_iommu_map_notify(iotlb->iova,
+ iotlb->iova + iotlb->addr_mask);
+
+ /*
+ * The IOMMU TLB entry we have just covers translation through
+ * this IOMMU to its immediate target. We need to translate
+ * it the rest of the way through to memory.
+ */
+ mr = address_space_translate(&address_space_memory,
+ iotlb->translated_addr,
+ &xlat, &len, iotlb->perm & IOMMU_WO);
+ if (!memory_region_is_ram(mr)) {
+ error_report("iommu map to non memory area %"HWADDR_PRIx"\n",
+ xlat);
+ return;
+ }
+ /*
+ * Translation truncates length to the IOMMU page size,
+ * check that it did not truncate too much.
+ */
+ if (len & iotlb->addr_mask) {
+ error_report("iommu has granularity incompatible with target AS\n");
+ return;
+ }
+
+ if ((iotlb->perm & IOMMU_RW) != IOMMU_NONE) {
+ vaddr = memory_region_get_ram_ptr(mr) + xlat;
+ ret = vfio_dma_map(container, iotlb->iova,
+ iotlb->addr_mask + 1, vaddr,
+ !(iotlb->perm & IOMMU_WO) || mr->readonly);
+ if (ret) {
+ error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", "
+ "0x%"HWADDR_PRIx", %p) = %d (%m)",
+ container, iotlb->iova,
+ iotlb->addr_mask + 1, vaddr, ret);
+ }
+ } else {
+ ret = vfio_dma_unmap(container, iotlb->iova, iotlb->addr_mask + 1);
+ if (ret) {
+ error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", "
+ "0x%"HWADDR_PRIx") = %d (%m)",
+ container, iotlb->iova,
+ iotlb->addr_mask + 1, ret);
+ }
+ }
+}
+
+static void vfio_listener_region_add(MemoryListener *listener,
+ MemoryRegionSection *section)
+{
+ VFIOContainer *container = container_of(listener, VFIOContainer,
+ iommu_data.type1.listener);
+ hwaddr iova, end;
+ Int128 llend;
+ void *vaddr;
+ int ret;
+
+ if (vfio_listener_skipped_section(section)) {
+ trace_vfio_listener_region_add_skip(
+ section->offset_within_address_space,
+ section->offset_within_address_space +
+ int128_get64(int128_sub(section->size, int128_one())));
+ return;
+ }
+
+ if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) !=
+ (section->offset_within_region & ~TARGET_PAGE_MASK))) {
+ error_report("%s received unaligned region", __func__);
+ return;
+ }
+
+ iova = TARGET_PAGE_ALIGN(section->offset_within_address_space);
+ llend = int128_make64(section->offset_within_address_space);
+ llend = int128_add(llend, section->size);
+ llend = int128_and(llend, int128_exts64(TARGET_PAGE_MASK));
+
+ if (int128_ge(int128_make64(iova), llend)) {
+ return;
+ }
+
+ memory_region_ref(section->mr);
+
+ if (memory_region_is_iommu(section->mr)) {
+ VFIOGuestIOMMU *giommu;
+
+ trace_vfio_listener_region_add_iommu(iova,
+ int128_get64(int128_sub(llend, int128_one())));
+ /*
+ * FIXME: We should do some checking to see if the
+ * capabilities of the host VFIO IOMMU are adequate to model
+ * the guest IOMMU
+ *
+ * FIXME: For VFIO iommu types which have KVM acceleration to
+ * avoid bouncing all map/unmaps through qemu this way, this
+ * would be the right place to wire that up (tell the KVM
+ * device emulation the VFIO iommu handles to use).
+ */
+ /*
+ * This assumes that the guest IOMMU is empty of
+ * mappings at this point.
+ *
+ * One way of doing this is:
+ * 1. Avoid sharing IOMMUs between emulated devices or different
+ * IOMMU groups.
+ * 2. Implement VFIO_IOMMU_ENABLE in the host kernel to fail if
+ * there are some mappings in IOMMU.
+ *
+ * VFIO on SPAPR does that. Other IOMMU models may do that different,
+ * they must make sure there are no existing mappings or
+ * loop through existing mappings to map them into VFIO.
+ */
+ giommu = g_malloc0(sizeof(*giommu));
+ giommu->iommu = section->mr;
+ giommu->container = container;
+ giommu->n.notify = vfio_iommu_map_notify;
+ QLIST_INSERT_HEAD(&container->giommu_list, giommu, giommu_next);
+ memory_region_register_iommu_notifier(giommu->iommu, &giommu->n);
+
+ return;
+ }
+
+ /* Here we assume that memory_region_is_ram(section->mr)==true */
+
+ end = int128_get64(llend);
+ vaddr = memory_region_get_ram_ptr(section->mr) +
+ section->offset_within_region +
+ (iova - section->offset_within_address_space);
+
+ trace_vfio_listener_region_add_ram(iova, end - 1, vaddr);
+
+ ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly);
+ if (ret) {
+ error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", "
+ "0x%"HWADDR_PRIx", %p) = %d (%m)",
+ container, iova, end - iova, vaddr, ret);
+
+ /*
+ * On the initfn path, store the first error in the container so we
+ * can gracefully fail. Runtime, there's not much we can do other
+ * than throw a hardware error.
+ */
+ if (!container->iommu_data.type1.initialized) {
+ if (!container->iommu_data.type1.error) {
+ container->iommu_data.type1.error = ret;
+ }
+ } else {
+ hw_error("vfio: DMA mapping failed, unable to continue");
+ }
+ }
+}
+
+static void vfio_listener_region_del(MemoryListener *listener,
+ MemoryRegionSection *section)
+{
+ VFIOContainer *container = container_of(listener, VFIOContainer,
+ iommu_data.type1.listener);
+ hwaddr iova, end;
+ int ret;
+
+ if (vfio_listener_skipped_section(section)) {
+ trace_vfio_listener_region_del_skip(
+ section->offset_within_address_space,
+ section->offset_within_address_space +
+ int128_get64(int128_sub(section->size, int128_one())));
+ return;
+ }
+
+ if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) !=
+ (section->offset_within_region & ~TARGET_PAGE_MASK))) {
+ error_report("%s received unaligned region", __func__);
+ return;
+ }
+
+ if (memory_region_is_iommu(section->mr)) {
+ VFIOGuestIOMMU *giommu;
+
+ QLIST_FOREACH(giommu, &container->giommu_list, giommu_next) {
+ if (giommu->iommu == section->mr) {
+ memory_region_unregister_iommu_notifier(&giommu->n);
+ QLIST_REMOVE(giommu, giommu_next);
+ g_free(giommu);
+ break;
+ }
+ }
+
+ /*
+ * FIXME: We assume the one big unmap below is adequate to
+ * remove any individual page mappings in the IOMMU which
+ * might have been copied into VFIO. This works for a page table
+ * based IOMMU where a big unmap flattens a large range of IO-PTEs.
+ * That may not be true for all IOMMU types.
+ */
+ }
+
+ iova = TARGET_PAGE_ALIGN(section->offset_within_address_space);
+ end = (section->offset_within_address_space + int128_get64(section->size)) &
+ TARGET_PAGE_MASK;
+
+ if (iova >= end) {
+ return;
+ }
+
+ trace_vfio_listener_region_del(iova, end - 1);
+
+ ret = vfio_dma_unmap(container, iova, end - iova);
+ memory_region_unref(section->mr);
+ if (ret) {
+ error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", "
+ "0x%"HWADDR_PRIx") = %d (%m)",
+ container, iova, end - iova, ret);
+ }
+}
+
+const MemoryListener vfio_memory_listener = {
+ .region_add = vfio_listener_region_add,
+ .region_del = vfio_listener_region_del,
+};
+
+void vfio_listener_release(VFIOContainer *container)
+{
+ memory_listener_unregister(&container->iommu_data.type1.listener);
+}
+
+int vfio_mmap_region(Object *obj, VFIORegion *region,
+ MemoryRegion *mem, MemoryRegion *submem,
+ void **map, size_t size, off_t offset,
+ const char *name)
+{
+ int ret = 0;
+ VFIODevice *vbasedev = region->vbasedev;
+
+ if (VFIO_ALLOW_MMAP && size && region->flags &
+ VFIO_REGION_INFO_FLAG_MMAP) {
+ int prot = 0;
+
+ if (region->flags & VFIO_REGION_INFO_FLAG_READ) {
+ prot |= PROT_READ;
+ }
+
+ if (region->flags & VFIO_REGION_INFO_FLAG_WRITE) {
+ prot |= PROT_WRITE;
+ }
+
+ *map = mmap(NULL, size, prot, MAP_SHARED,
+ vbasedev->fd,
+ region->fd_offset + offset);
+ if (*map == MAP_FAILED) {
+ *map = NULL;
+ ret = -errno;
+ goto empty_region;
+ }
+
+ memory_region_init_ram_ptr(submem, obj, name, size, *map);
+ memory_region_set_skip_dump(submem);
+ } else {
+empty_region:
+ /* Create a zero sized sub-region to make cleanup easy. */
+ memory_region_init(submem, obj, name, 0);
+ }
+
+ memory_region_add_subregion(mem, offset, submem);
+
+ return ret;
+}
+
+void vfio_reset_handler(void *opaque)
+{
+ VFIOGroup *group;
+ VFIODevice *vbasedev;
+
+ QLIST_FOREACH(group, &vfio_group_list, next) {
+ QLIST_FOREACH(vbasedev, &group->device_list, next) {
+ vbasedev->ops->vfio_compute_needs_reset(vbasedev);
+ }
+ }
+
+ QLIST_FOREACH(group, &vfio_group_list, next) {
+ QLIST_FOREACH(vbasedev, &group->device_list, next) {
+ if (vbasedev->needs_reset) {
+ vbasedev->ops->vfio_hot_reset_multi(vbasedev);
+ }
+ }
+ }
+}
+
+static void vfio_kvm_device_add_group(VFIOGroup *group)
+{
+#ifdef CONFIG_KVM
+ struct kvm_device_attr attr = {
+ .group = KVM_DEV_VFIO_GROUP,
+ .attr = KVM_DEV_VFIO_GROUP_ADD,
+ .addr = (uint64_t)(unsigned long)&group->fd,
+ };
+
+ if (!kvm_enabled()) {
+ return;
+ }
+
+ if (vfio_kvm_device_fd < 0) {
+ struct kvm_create_device cd = {
+ .type = KVM_DEV_TYPE_VFIO,
+ };
+
+ if (kvm_vm_ioctl(kvm_state, KVM_CREATE_DEVICE, &cd)) {
+ error_report("KVM_CREATE_DEVICE: %m\n");
+ return;
+ }
+
+ vfio_kvm_device_fd = cd.fd;
+ }
+
+ if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) {
+ error_report("Failed to add group %d to KVM VFIO device: %m",
+ group->groupid);
+ }
+#endif
+}
+
+static void vfio_kvm_device_del_group(VFIOGroup *group)
+{
+#ifdef CONFIG_KVM
+ struct kvm_device_attr attr = {
+ .group = KVM_DEV_VFIO_GROUP,
+ .attr = KVM_DEV_VFIO_GROUP_DEL,
+ .addr = (uint64_t)(unsigned long)&group->fd,
+ };
+
+ if (vfio_kvm_device_fd < 0) {
+ return;
+ }
+
+ if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) {
+ error_report("Failed to remove group %d from KVM VFIO device: %m",
+ group->groupid);
+ }
+#endif
+}
+
+static VFIOAddressSpace *vfio_get_address_space(AddressSpace *as)
+{
+ VFIOAddressSpace *space;
+
+ QLIST_FOREACH(space, &vfio_address_spaces, list) {
+ if (space->as == as) {
+ return space;
+ }
+ }
+
+ /* No suitable VFIOAddressSpace, create a new one */
+ space = g_malloc0(sizeof(*space));
+ space->as = as;
+ QLIST_INIT(&space->containers);
+
+ QLIST_INSERT_HEAD(&vfio_address_spaces, space, list);
+
+ return space;
+}
+
+static void vfio_put_address_space(VFIOAddressSpace *space)
+{
+ if (QLIST_EMPTY(&space->containers)) {
+ QLIST_REMOVE(space, list);
+ g_free(space);
+ }
+}
+
+static int vfio_connect_container(VFIOGroup *group, AddressSpace *as)
+{
+ VFIOContainer *container;
+ int ret, fd;
+ VFIOAddressSpace *space;
+
+ space = vfio_get_address_space(as);
+
+ QLIST_FOREACH(container, &space->containers, next) {
+ if (!ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &container->fd)) {
+ group->container = container;
+ QLIST_INSERT_HEAD(&container->group_list, group, container_next);
+ return 0;
+ }
+ }
+
+ fd = qemu_open("/dev/vfio/vfio", O_RDWR);
+ if (fd < 0) {
+ error_report("vfio: failed to open /dev/vfio/vfio: %m");
+ ret = -errno;
+ goto put_space_exit;
+ }
+
+ ret = ioctl(fd, VFIO_GET_API_VERSION);
+ if (ret != VFIO_API_VERSION) {
+ error_report("vfio: supported vfio version: %d, "
+ "reported version: %d", VFIO_API_VERSION, ret);
+ ret = -EINVAL;
+ goto close_fd_exit;
+ }
+
+ container = g_malloc0(sizeof(*container));
+ container->space = space;
+ container->fd = fd;
+ if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) {
+ ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd);
+ if (ret) {
+ error_report("vfio: failed to set group container: %m");
+ ret = -errno;
+ goto free_container_exit;
+ }
+
+ ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU);
+ if (ret) {
+ error_report("vfio: failed to set iommu for container: %m");
+ ret = -errno;
+ goto free_container_exit;
+ }
+
+ container->iommu_data.type1.listener = vfio_memory_listener;
+ container->iommu_data.release = vfio_listener_release;
+
+ memory_listener_register(&container->iommu_data.type1.listener,
+ &address_space_memory);
+
+ if (container->iommu_data.type1.error) {
+ ret = container->iommu_data.type1.error;
+ error_report("vfio: memory listener initialization failed for container");
+ goto listener_release_exit;
+ }
+
+ container->iommu_data.type1.initialized = true;
+
+ } else if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_IOMMU)) {
+ ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd);
+ if (ret) {
+ error_report("vfio: failed to set group container: %m");
+ ret = -errno;
+ goto free_container_exit;
+ }
+ ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_SPAPR_TCE_IOMMU);
+ if (ret) {
+ error_report("vfio: failed to set iommu for container: %m");
+ ret = -errno;
+ goto free_container_exit;
+ }
+
+ /*
+ * The host kernel code implementing VFIO_IOMMU_DISABLE is called
+ * when container fd is closed so we do not call it explicitly
+ * in this file.
+ */
+ ret = ioctl(fd, VFIO_IOMMU_ENABLE);
+ if (ret) {
+ error_report("vfio: failed to enable container: %m");
+ ret = -errno;
+ goto free_container_exit;
+ }
+
+ container->iommu_data.type1.listener = vfio_memory_listener;
+ container->iommu_data.release = vfio_listener_release;
+
+ memory_listener_register(&container->iommu_data.type1.listener,
+ container->space->as);
+
+ } else {
+ error_report("vfio: No available IOMMU models");
+ ret = -EINVAL;
+ goto free_container_exit;
+ }
+
+ QLIST_INIT(&container->group_list);
+ QLIST_INSERT_HEAD(&space->containers, container, next);
+
+ group->container = container;
+ QLIST_INSERT_HEAD(&container->group_list, group, container_next);
+
+ return 0;
+listener_release_exit:
+ vfio_listener_release(container);
+
+free_container_exit:
+ g_free(container);
+
+close_fd_exit:
+ close(fd);
+
+put_space_exit:
+ vfio_put_address_space(space);
+
+ return ret;
+}
+
+static void vfio_disconnect_container(VFIOGroup *group)
+{
+ VFIOContainer *container = group->container;
+
+ if (ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER, &container->fd)) {
+ error_report("vfio: error disconnecting group %d from container",
+ group->groupid);
+ }
+
+ QLIST_REMOVE(group, container_next);
+ group->container = NULL;
+
+ if (QLIST_EMPTY(&container->group_list)) {
+ VFIOAddressSpace *space = container->space;
+
+ if (container->iommu_data.release) {
+ container->iommu_data.release(container);
+ }
+ QLIST_REMOVE(container, next);
+ trace_vfio_disconnect_container(container->fd);
+ close(container->fd);
+ g_free(container);
+
+ vfio_put_address_space(space);
+ }
+}
+
+VFIOGroup *vfio_get_group(int groupid, AddressSpace *as)
+{
+ VFIOGroup *group;
+ char path[32];
+ struct vfio_group_status status = { .argsz = sizeof(status) };
+
+ QLIST_FOREACH(group, &vfio_group_list, next) {
+ if (group->groupid == groupid) {
+ /* Found it. Now is it already in the right context? */
+ if (group->container->space->as == as) {
+ return group;
+ } else {
+ error_report("vfio: group %d used in multiple address spaces",
+ group->groupid);
+ return NULL;
+ }
+ }
+ }
+
+ group = g_malloc0(sizeof(*group));
+
+ snprintf(path, sizeof(path), "/dev/vfio/%d", groupid);
+ group->fd = qemu_open(path, O_RDWR);
+ if (group->fd < 0) {
+ error_report("vfio: error opening %s: %m", path);
+ goto free_group_exit;
+ }
+
+ if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &status)) {
+ error_report("vfio: error getting group status: %m");
+ goto close_fd_exit;
+ }
+
+ if (!(status.flags & VFIO_GROUP_FLAGS_VIABLE)) {
+ error_report("vfio: error, group %d is not viable, please ensure "
+ "all devices within the iommu_group are bound to their "
+ "vfio bus driver.", groupid);
+ goto close_fd_exit;
+ }
+
+ group->groupid = groupid;
+ QLIST_INIT(&group->device_list);
+
+ if (vfio_connect_container(group, as)) {
+ error_report("vfio: failed to setup container for group %d", groupid);
+ goto close_fd_exit;
+ }
+
+ if (QLIST_EMPTY(&vfio_group_list)) {
+ qemu_register_reset(vfio_reset_handler, NULL);
+ }
+
+ QLIST_INSERT_HEAD(&vfio_group_list, group, next);
+
+ vfio_kvm_device_add_group(group);
+
+ return group;
+
+close_fd_exit:
+ close(group->fd);
+
+free_group_exit:
+ g_free(group);
+
+ return NULL;
+}
+
+void vfio_put_group(VFIOGroup *group)
+{
+ if (!QLIST_EMPTY(&group->device_list)) {
+ return;
+ }
+
+ vfio_kvm_device_del_group(group);
+ vfio_disconnect_container(group);
+ QLIST_REMOVE(group, next);
+ trace_vfio_put_group(group->fd);
+ close(group->fd);
+ g_free(group);
+
+ if (QLIST_EMPTY(&vfio_group_list)) {
+ qemu_unregister_reset(vfio_reset_handler, NULL);
+ }
+}
+
+int vfio_get_device(VFIOGroup *group, const char *name,
+ VFIODevice *vbasedev)
+{
+ struct vfio_device_info dev_info = { .argsz = sizeof(dev_info) };
+ int ret;
+
+ ret = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, name);
+ if (ret < 0) {
+ error_report("vfio: error getting device %s from group %d: %m",
+ name, group->groupid);
+ error_printf("Verify all devices in group %d are bound to vfio-<bus> "
+ "or pci-stub and not already in use\n", group->groupid);
+ return ret;
+ }
+
+ vbasedev->fd = ret;
+ vbasedev->group = group;
+ QLIST_INSERT_HEAD(&group->device_list, vbasedev, next);
+
+ ret = ioctl(vbasedev->fd, VFIO_DEVICE_GET_INFO, &dev_info);
+ if (ret) {
+ error_report("vfio: error getting device info: %m");
+ goto error;
+ }
+
+ vbasedev->num_irqs = dev_info.num_irqs;
+ vbasedev->num_regions = dev_info.num_regions;
+ vbasedev->flags = dev_info.flags;
+
+ trace_vfio_get_device(name, dev_info.flags, dev_info.num_regions,
+ dev_info.num_irqs);
+
+ vbasedev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET);
+
+ ret = vbasedev->ops->vfio_populate_device(vbasedev);
+
+error:
+ if (ret) {
+ vfio_put_base_device(vbasedev);
+ }
+ return ret;
+}
+
+void vfio_put_base_device(VFIODevice *vbasedev)
+{
+ QLIST_REMOVE(vbasedev, next);
+ vbasedev->group = NULL;
+ trace_vfio_put_base_device(vbasedev->fd);
+ close(vbasedev->fd);
+}
+
+static int vfio_container_do_ioctl(AddressSpace *as, int32_t groupid,
+ int req, void *param)
+{
+ VFIOGroup *group;
+ VFIOContainer *container;
+ int ret = -1;
+
+ group = vfio_get_group(groupid, as);
+ if (!group) {
+ error_report("vfio: group %d not registered", groupid);
+ return ret;
+ }
+
+ container = group->container;
+ if (group->container) {
+ ret = ioctl(container->fd, req, param);
+ if (ret < 0) {
+ error_report("vfio: failed to ioctl container: ret=%d, %s",
+ ret, strerror(errno));
+ }
+ }
+
+ vfio_put_group(group);
+
+ return ret;
+}
+
+int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
+ int req, void *param)
+{
+ /* We allow only certain ioctls to the container */
+ switch (req) {
+ case VFIO_CHECK_EXTENSION:
+ case VFIO_IOMMU_SPAPR_TCE_GET_INFO:
+ break;
+ default:
+ /* Return an error on unknown requests */
+ error_report("vfio: unsupported ioctl %X", req);
+ return -1;
+ }
+
+ return vfio_container_do_ioctl(as, groupid, req, param);
+}
@@ -41,16 +41,7 @@
#include "sysemu/sysemu.h"
#include "trace.h"
#include "hw/vfio/vfio.h"
-
-/* Extra debugging, trap acceleration paths for more logging */
-#define VFIO_ALLOW_MMAP 1
-#define VFIO_ALLOW_KVM_INTX 1
-#define VFIO_ALLOW_KVM_MSI 1
-#define VFIO_ALLOW_KVM_MSIX 1
-
-enum {
- VFIO_DEVICE_TYPE_PCI = 0,
-};
+#include "hw/vfio/vfio-common.h"
struct VFIOPCIDevice;
@@ -77,17 +68,6 @@ typedef struct VFIOQuirk {
} data;
} VFIOQuirk;
-typedef struct VFIORegion {
- struct VFIODevice *vbasedev;
- off_t fd_offset; /* offset of region within device fd */
- MemoryRegion mem; /* slow, read/write access */
- MemoryRegion mmap_mem; /* direct mapped access */
- void *mmap;
- size_t size;
- uint32_t flags; /* VFIO region flags (rd/wr/mmap) */
- uint8_t nr; /* cache the region number for debug */
-} VFIORegion;
-
typedef struct VFIOBAR {
VFIORegion region;
bool ioport;
@@ -143,45 +123,6 @@ enum {
VFIO_INT_MSIX = 3,
};
-typedef struct VFIOAddressSpace {
- AddressSpace *as;
- QLIST_HEAD(, VFIOContainer) containers;
- QLIST_ENTRY(VFIOAddressSpace) list;
-} VFIOAddressSpace;
-
-static QLIST_HEAD(, VFIOAddressSpace) vfio_address_spaces =
- QLIST_HEAD_INITIALIZER(vfio_address_spaces);
-
-struct VFIOGroup;
-
-typedef struct VFIOType1 {
- MemoryListener listener;
- int error;
- bool initialized;
-} VFIOType1;
-
-typedef struct VFIOContainer {
- VFIOAddressSpace *space;
- int fd; /* /dev/vfio/vfio, empowered by the attached groups */
- struct {
- /* enable abstraction to support various iommu backends */
- union {
- VFIOType1 type1;
- };
- void (*release)(struct VFIOContainer *);
- } iommu_data;
- QLIST_HEAD(, VFIOGuestIOMMU) giommu_list;
- QLIST_HEAD(, VFIOGroup) group_list;
- QLIST_ENTRY(VFIOContainer) next;
-} VFIOContainer;
-
-typedef struct VFIOGuestIOMMU {
- VFIOContainer *container;
- MemoryRegion *iommu;
- Notifier n;
- QLIST_ENTRY(VFIOGuestIOMMU) giommu_next;
-} VFIOGuestIOMMU;
-
/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */
typedef struct VFIOMSIXInfo {
uint8_t table_bar;
@@ -193,29 +134,6 @@ typedef struct VFIOMSIXInfo {
void *mmap;
} VFIOMSIXInfo;
-typedef struct VFIODeviceOps VFIODeviceOps;
-
-typedef struct VFIODevice {
- QLIST_ENTRY(VFIODevice) next;
- struct VFIOGroup *group;
- char *name;
- int fd;
- int type;
- bool reset_works;
- bool needs_reset;
- VFIODeviceOps *ops;
- unsigned int num_irqs;
- unsigned int num_regions;
- unsigned int flags;
-} VFIODevice;
-
-struct VFIODeviceOps {
- void (*vfio_compute_needs_reset)(VFIODevice *vdev);
- int (*vfio_hot_reset_multi)(VFIODevice *vdev);
- void (*vfio_eoi)(VFIODevice *vdev);
- int (*vfio_populate_device)(VFIODevice *vdev);
-};
-
typedef struct VFIOPCIDevice {
PCIDevice pdev;
VFIODevice vbasedev;
@@ -247,15 +165,6 @@ typedef struct VFIOPCIDevice {
bool rom_read_failed;
} VFIOPCIDevice;
-typedef struct VFIOGroup {
- int fd;
- int groupid;
- VFIOContainer *container;
- QLIST_HEAD(, VFIODevice) device_list;
- QLIST_ENTRY(VFIOGroup) next;
- QLIST_ENTRY(VFIOGroup) container_next;
-} VFIOGroup;
-
typedef struct VFIORomBlacklistEntry {
uint16_t vendor_id;
uint16_t device_id;
@@ -281,76 +190,14 @@ static const VFIORomBlacklistEntry romblacklist[] = {
#define MSIX_CAP_LENGTH 12
-static QLIST_HEAD(, VFIOGroup)
- vfio_group_list = QLIST_HEAD_INITIALIZER(vfio_group_list);
-
-#ifdef CONFIG_KVM
-/*
- * We have a single VFIO pseudo device per KVM VM. Once created it lives
- * for the life of the VM. Closing the file descriptor only drops our
- * reference to it and the device's reference to kvm. Therefore once
- * initialized, this file descriptor is only released on QEMU exit and
- * we'll re-use it should another vfio device be attached before then.
- */
-static int vfio_kvm_device_fd = -1;
-#endif
-
static void vfio_disable_interrupts(VFIOPCIDevice *vdev);
static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr,
uint32_t val, int len);
static void vfio_mmap_set_enabled(VFIOPCIDevice *vdev, bool enabled);
-static void vfio_put_base_device(VFIODevice *vbasedev);
static int vfio_populate_device(VFIODevice *vbasedev);
/*
- * Common VFIO interrupt disable
- */
-static void vfio_disable_irqindex(VFIODevice *vbasedev, int index)
-{
- struct vfio_irq_set irq_set = {
- .argsz = sizeof(irq_set),
- .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER,
- .index = index,
- .start = 0,
- .count = 0,
- };
-
- ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
-}
-
-/*
- * INTx
- */
-static void vfio_unmask_single_irqindex(VFIODevice *vbasedev, int index)
-{
- struct vfio_irq_set irq_set = {
- .argsz = sizeof(irq_set),
- .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK,
- .index = index,
- .start = 0,
- .count = 1,
- };
-
- ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
-}
-
-#ifdef CONFIG_KVM /* Unused outside of CONFIG_KVM code */
-static void vfio_mask_single_irqindex(VFIODevice *vbasedev, int index)
-{
- struct vfio_irq_set irq_set = {
- .argsz = sizeof(irq_set),
- .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_MASK,
- .index = index,
- .start = 0,
- .count = 1,
- };
-
- ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
-}
-#endif
-
-/*
* Disabling BAR mmaping can be slow, but toggling it around INTx can
* also be a huge overhead. We try to get the best of both worlds by
* waiting until an interrupt to disable mmaps (subsequent transitions
@@ -1080,105 +927,6 @@ static void vfio_update_msi(VFIOPCIDevice *vdev)
}
}
-/*
- * IO Port/MMIO - Beware of the endians, VFIO is always little endian
- */
-static void vfio_region_write(void *opaque, hwaddr addr,
- uint64_t data, unsigned size)
-{
- VFIORegion *region = opaque;
- VFIODevice *vbasedev = region->vbasedev;
- union {
- uint8_t byte;
- uint16_t word;
- uint32_t dword;
- uint64_t qword;
- } buf;
-
- switch (size) {
- case 1:
- buf.byte = data;
- break;
- case 2:
- buf.word = cpu_to_le16(data);
- break;
- case 4:
- buf.dword = cpu_to_le32(data);
- break;
- default:
- hw_error("vfio: unsupported write size, %d bytes", size);
- break;
- }
-
- if (pwrite(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) {
- error_report("%s(%s:region%d+0x%"HWADDR_PRIx", 0x%"PRIx64
- ",%d) failed: %m",
- __func__, vbasedev->name, region->nr,
- addr, data, size);
- }
-
- trace_vfio_region_write(vbasedev->name, region->nr, addr, data, size);
-
- /*
- * A read or write to a BAR always signals an INTx EOI. This will
- * do nothing if not pending (including not in INTx mode). We assume
- * that a BAR access is in response to an interrupt and that BAR
- * accesses will service the interrupt. Unfortunately, we don't know
- * which access will service the interrupt, so we're potentially
- * getting quite a few host interrupts per guest interrupt.
- */
- vbasedev->ops->vfio_eoi(vbasedev);
-}
-
-static uint64_t vfio_region_read(void *opaque,
- hwaddr addr, unsigned size)
-{
- VFIORegion *region = opaque;
- VFIODevice *vbasedev = region->vbasedev;
- union {
- uint8_t byte;
- uint16_t word;
- uint32_t dword;
- uint64_t qword;
- } buf;
- uint64_t data = 0;
-
- if (pread(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) {
- error_report("%s(%s:region%d+0x%"HWADDR_PRIx", %d) failed: %m",
- __func__, vbasedev->name, region->nr,
- addr, size);
- return (uint64_t)-1;
- }
-
- switch (size) {
- case 1:
- data = buf.byte;
- break;
- case 2:
- data = le16_to_cpu(buf.word);
- break;
- case 4:
- data = le32_to_cpu(buf.dword);
- break;
- default:
- hw_error("vfio: unsupported read size, %d bytes", size);
- break;
- }
-
- trace_vfio_region_read(vbasedev->name, region->nr, addr, size, data);
-
- /* Same as write above */
- vbasedev->ops->vfio_eoi(vbasedev);
-
- return data;
-}
-
-static const MemoryRegionOps vfio_region_ops = {
- .read = vfio_region_read,
- .write = vfio_region_write,
- .endianness = DEVICE_LITTLE_ENDIAN,
-};
-
static void vfio_pci_load_rom(VFIOPCIDevice *vdev)
{
struct vfio_region_info reg_info = {
@@ -2377,305 +2125,6 @@ static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr,
}
/*
- * DMA - Mapping and unmapping for the "type1" IOMMU interface used on x86
- */
-static int vfio_dma_unmap(VFIOContainer *container,
- hwaddr iova, ram_addr_t size)
-{
- struct vfio_iommu_type1_dma_unmap unmap = {
- .argsz = sizeof(unmap),
- .flags = 0,
- .iova = iova,
- .size = size,
- };
-
- if (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) {
- error_report("VFIO_UNMAP_DMA: %d\n", -errno);
- return -errno;
- }
-
- return 0;
-}
-
-static int vfio_dma_map(VFIOContainer *container, hwaddr iova,
- ram_addr_t size, void *vaddr, bool readonly)
-{
- struct vfio_iommu_type1_dma_map map = {
- .argsz = sizeof(map),
- .flags = VFIO_DMA_MAP_FLAG_READ,
- .vaddr = (__u64)(uintptr_t)vaddr,
- .iova = iova,
- .size = size,
- };
-
- if (!readonly) {
- map.flags |= VFIO_DMA_MAP_FLAG_WRITE;
- }
-
- /*
- * Try the mapping, if it fails with EBUSY, unmap the region and try
- * again. This shouldn't be necessary, but we sometimes see it in
- * the the VGA ROM space.
- */
- if (ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0 ||
- (errno == EBUSY && vfio_dma_unmap(container, iova, size) == 0 &&
- ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0)) {
- return 0;
- }
-
- error_report("VFIO_MAP_DMA: %d\n", -errno);
- return -errno;
-}
-
-static bool vfio_listener_skipped_section(MemoryRegionSection *section)
-{
- return (!memory_region_is_ram(section->mr) &&
- !memory_region_is_iommu(section->mr)) ||
- /*
- * Sizing an enabled 64-bit BAR can cause spurious mappings to
- * addresses in the upper part of the 64-bit address space. These
- * are never accessed by the CPU and beyond the address width of
- * some IOMMU hardware. TODO: VFIO should tell us the IOMMU width.
- */
- section->offset_within_address_space & (1ULL << 63);
-}
-
-static void vfio_iommu_map_notify(Notifier *n, void *data)
-{
- VFIOGuestIOMMU *giommu = container_of(n, VFIOGuestIOMMU, n);
- VFIOContainer *container = giommu->container;
- IOMMUTLBEntry *iotlb = data;
- MemoryRegion *mr;
- hwaddr xlat;
- hwaddr len = iotlb->addr_mask + 1;
- void *vaddr;
- int ret;
-
- trace_vfio_iommu_map_notify(iotlb->iova,
- iotlb->iova + iotlb->addr_mask);
-
- /*
- * The IOMMU TLB entry we have just covers translation through
- * this IOMMU to its immediate target. We need to translate
- * it the rest of the way through to memory.
- */
- mr = address_space_translate(&address_space_memory,
- iotlb->translated_addr,
- &xlat, &len, iotlb->perm & IOMMU_WO);
- if (!memory_region_is_ram(mr)) {
- error_report("iommu map to non memory area %"HWADDR_PRIx"\n",
- xlat);
- return;
- }
- /*
- * Translation truncates length to the IOMMU page size,
- * check that it did not truncate too much.
- */
- if (len & iotlb->addr_mask) {
- error_report("iommu has granularity incompatible with target AS\n");
- return;
- }
-
- if ((iotlb->perm & IOMMU_RW) != IOMMU_NONE) {
- vaddr = memory_region_get_ram_ptr(mr) + xlat;
-
- ret = vfio_dma_map(container, iotlb->iova,
- iotlb->addr_mask + 1, vaddr,
- !(iotlb->perm & IOMMU_WO) || mr->readonly);
- if (ret) {
- error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", "
- "0x%"HWADDR_PRIx", %p) = %d (%m)",
- container, iotlb->iova,
- iotlb->addr_mask + 1, vaddr, ret);
- }
- } else {
- ret = vfio_dma_unmap(container, iotlb->iova, iotlb->addr_mask + 1);
- if (ret) {
- error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", "
- "0x%"HWADDR_PRIx") = %d (%m)",
- container, iotlb->iova,
- iotlb->addr_mask + 1, ret);
- }
- }
-}
-
-static void vfio_listener_region_add(MemoryListener *listener,
- MemoryRegionSection *section)
-{
- VFIOContainer *container = container_of(listener, VFIOContainer,
- iommu_data.type1.listener);
- hwaddr iova, end;
- Int128 llend;
- void *vaddr;
- int ret;
-
- if (vfio_listener_skipped_section(section)) {
- trace_vfio_listener_region_add_skip(
- section->offset_within_address_space,
- section->offset_within_address_space +
- int128_get64(int128_sub(section->size, int128_one())));
- return;
- }
-
- if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) !=
- (section->offset_within_region & ~TARGET_PAGE_MASK))) {
- error_report("%s received unaligned region", __func__);
- return;
- }
-
- iova = TARGET_PAGE_ALIGN(section->offset_within_address_space);
- llend = int128_make64(section->offset_within_address_space);
- llend = int128_add(llend, section->size);
- llend = int128_and(llend, int128_exts64(TARGET_PAGE_MASK));
-
- if (int128_ge(int128_make64(iova), llend)) {
- return;
- }
-
- memory_region_ref(section->mr);
-
- if (memory_region_is_iommu(section->mr)) {
- VFIOGuestIOMMU *giommu;
-
- trace_vfio_listener_region_add_iommu(iova,
- int128_get64(int128_sub(llend, int128_one())));
- /*
- * FIXME: We should do some checking to see if the
- * capabilities of the host VFIO IOMMU are adequate to model
- * the guest IOMMU
- *
- * FIXME: For VFIO iommu types which have KVM acceleration to
- * avoid bouncing all map/unmaps through qemu this way, this
- * would be the right place to wire that up (tell the KVM
- * device emulation the VFIO iommu handles to use).
- */
- /*
- * This assumes that the guest IOMMU is empty of
- * mappings at this point.
- *
- * One way of doing this is:
- * 1. Avoid sharing IOMMUs between emulated devices or different
- * IOMMU groups.
- * 2. Implement VFIO_IOMMU_ENABLE in the host kernel to fail if
- * there are some mappings in IOMMU.
- *
- * VFIO on SPAPR does that. Other IOMMU models may do that different,
- * they must make sure there are no existing mappings or
- * loop through existing mappings to map them into VFIO.
- */
- giommu = g_malloc0(sizeof(*giommu));
- giommu->iommu = section->mr;
- giommu->container = container;
- giommu->n.notify = vfio_iommu_map_notify;
- QLIST_INSERT_HEAD(&container->giommu_list, giommu, giommu_next);
- memory_region_register_iommu_notifier(giommu->iommu, &giommu->n);
-
- return;
- }
-
- /* Here we assume that memory_region_is_ram(section->mr)==true */
-
- end = int128_get64(llend);
- vaddr = memory_region_get_ram_ptr(section->mr) +
- section->offset_within_region +
- (iova - section->offset_within_address_space);
-
- trace_vfio_listener_region_add_ram(iova, end - 1, vaddr);
-
- ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly);
- if (ret) {
- error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", "
- "0x%"HWADDR_PRIx", %p) = %d (%m)",
- container, iova, end - iova, vaddr, ret);
-
- /*
- * On the initfn path, store the first error in the container so we
- * can gracefully fail. Runtime, there's not much we can do other
- * than throw a hardware error.
- */
- if (!container->iommu_data.type1.initialized) {
- if (!container->iommu_data.type1.error) {
- container->iommu_data.type1.error = ret;
- }
- } else {
- hw_error("vfio: DMA mapping failed, unable to continue");
- }
- }
-}
-
-static void vfio_listener_region_del(MemoryListener *listener,
- MemoryRegionSection *section)
-{
- VFIOContainer *container = container_of(listener, VFIOContainer,
- iommu_data.type1.listener);
- hwaddr iova, end;
- int ret;
-
- if (vfio_listener_skipped_section(section)) {
- trace_vfio_listener_region_del_skip(
- section->offset_within_address_space,
- section->offset_within_address_space +
- int128_get64(int128_sub(section->size, int128_one())));
- return;
- }
-
- if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) !=
- (section->offset_within_region & ~TARGET_PAGE_MASK))) {
- error_report("%s received unaligned region", __func__);
- return;
- }
-
- if (memory_region_is_iommu(section->mr)) {
- VFIOGuestIOMMU *giommu;
-
- QLIST_FOREACH(giommu, &container->giommu_list, giommu_next) {
- if (giommu->iommu == section->mr) {
- memory_region_unregister_iommu_notifier(&giommu->n);
- QLIST_REMOVE(giommu, giommu_next);
- g_free(giommu);
- break;
- }
- }
-
- /*
- * FIXME: We assume the one big unmap below is adequate to
- * remove any individual page mappings in the IOMMU which
- * might have been copied into VFIO. This works for a page table
- * based IOMMU where a big unmap flattens a large range of IO-PTEs.
- * That may not be true for all IOMMU types.
- */
- }
-
- iova = TARGET_PAGE_ALIGN(section->offset_within_address_space);
- end = (section->offset_within_address_space + int128_get64(section->size)) &
- TARGET_PAGE_MASK;
-
- if (iova >= end) {
- return;
- }
-
- trace_vfio_listener_region_del(iova, end - 1);
-
- ret = vfio_dma_unmap(container, iova, end - iova);
- memory_region_unref(section->mr);
- if (ret) {
- error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", "
- "0x%"HWADDR_PRIx") = %d (%m)",
- container, iova, end - iova, ret);
- }
-}
-
-static MemoryListener vfio_memory_listener = {
- .region_add = vfio_listener_region_add,
- .region_del = vfio_listener_region_del,
-};
-
-static void vfio_listener_release(VFIOContainer *container)
-{
- memory_listener_unregister(&container->iommu_data.type1.listener);
-}
-
-/*
* Interrupt setup
*/
static void vfio_disable_interrupts(VFIOPCIDevice *vdev)
@@ -2849,47 +2298,6 @@ static void vfio_unmap_bar(VFIOPCIDevice *vdev, int nr)
}
}
-static int vfio_mmap_region(Object *obj, VFIORegion *region,
- MemoryRegion *mem, MemoryRegion *submem,
- void **map, size_t size, off_t offset,
- const char *name)
-{
- int ret = 0;
- VFIODevice *vbasedev = region->vbasedev;
-
- if (VFIO_ALLOW_MMAP && size && region->flags &
- VFIO_REGION_INFO_FLAG_MMAP) {
- int prot = 0;
-
- if (region->flags & VFIO_REGION_INFO_FLAG_READ) {
- prot |= PROT_READ;
- }
-
- if (region->flags & VFIO_REGION_INFO_FLAG_WRITE) {
- prot |= PROT_WRITE;
- }
-
- *map = mmap(NULL, size, prot, MAP_SHARED,
- vbasedev->fd, region->fd_offset + offset);
- if (*map == MAP_FAILED) {
- *map = NULL;
- ret = -errno;
- goto empty_region;
- }
-
- memory_region_init_ram_ptr(submem, obj, name, size, *map);
- memory_region_set_skip_dump(submem);
- } else {
-empty_region:
- /* Create a zero sized sub-region to make cleanup easy. */
- memory_region_init(submem, obj, name, 0);
- }
-
- memory_region_add_subregion(mem, offset, submem);
-
- return ret;
-}
-
static void vfio_map_bar(VFIOPCIDevice *vdev, int nr)
{
VFIOBAR *bar = &vdev->bars[nr];
@@ -3529,345 +2937,6 @@ static VFIODeviceOps vfio_pci_ops = {
.vfio_populate_device = vfio_populate_device,
};
-static void vfio_reset_handler(void *opaque)
-{
- VFIOGroup *group;
- VFIODevice *vbasedev;
-
- QLIST_FOREACH(group, &vfio_group_list, next) {
- QLIST_FOREACH(vbasedev, &group->device_list, next) {
- vbasedev->ops->vfio_compute_needs_reset(vbasedev);
- }
- }
-
- QLIST_FOREACH(group, &vfio_group_list, next) {
- QLIST_FOREACH(vbasedev, &group->device_list, next) {
- if (vbasedev->needs_reset) {
- vbasedev->ops->vfio_hot_reset_multi(vbasedev);
- }
- }
- }
-}
-
-static void vfio_kvm_device_add_group(VFIOGroup *group)
-{
-#ifdef CONFIG_KVM
- struct kvm_device_attr attr = {
- .group = KVM_DEV_VFIO_GROUP,
- .attr = KVM_DEV_VFIO_GROUP_ADD,
- .addr = (uint64_t)(unsigned long)&group->fd,
- };
-
- if (!kvm_enabled()) {
- return;
- }
-
- if (vfio_kvm_device_fd < 0) {
- struct kvm_create_device cd = {
- .type = KVM_DEV_TYPE_VFIO,
- };
-
- if (kvm_vm_ioctl(kvm_state, KVM_CREATE_DEVICE, &cd)) {
- error_report("KVM_CREATE_DEVICE: %m\n");
- return;
- }
-
- vfio_kvm_device_fd = cd.fd;
- }
-
- if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) {
- error_report("Failed to add group %d to KVM VFIO device: %m",
- group->groupid);
- }
-#endif
-}
-
-static void vfio_kvm_device_del_group(VFIOGroup *group)
-{
-#ifdef CONFIG_KVM
- struct kvm_device_attr attr = {
- .group = KVM_DEV_VFIO_GROUP,
- .attr = KVM_DEV_VFIO_GROUP_DEL,
- .addr = (uint64_t)(unsigned long)&group->fd,
- };
-
- if (vfio_kvm_device_fd < 0) {
- return;
- }
-
- if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) {
- error_report("Failed to remove group %d from KVM VFIO device: %m",
- group->groupid);
- }
-#endif
-}
-
-static VFIOAddressSpace *vfio_get_address_space(AddressSpace *as)
-{
- VFIOAddressSpace *space;
-
- QLIST_FOREACH(space, &vfio_address_spaces, list) {
- if (space->as == as) {
- return space;
- }
- }
-
- /* No suitable VFIOAddressSpace, create a new one */
- space = g_malloc0(sizeof(*space));
- space->as = as;
- QLIST_INIT(&space->containers);
-
- QLIST_INSERT_HEAD(&vfio_address_spaces, space, list);
-
- return space;
-}
-
-static void vfio_put_address_space(VFIOAddressSpace *space)
-{
- if (QLIST_EMPTY(&space->containers)) {
- QLIST_REMOVE(space, list);
- g_free(space);
- }
-}
-
-static int vfio_connect_container(VFIOGroup *group, AddressSpace *as)
-{
- VFIOContainer *container;
- int ret, fd;
- VFIOAddressSpace *space;
-
- space = vfio_get_address_space(as);
-
- QLIST_FOREACH(container, &space->containers, next) {
- if (!ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &container->fd)) {
- group->container = container;
- QLIST_INSERT_HEAD(&container->group_list, group, container_next);
- return 0;
- }
- }
-
- fd = qemu_open("/dev/vfio/vfio", O_RDWR);
- if (fd < 0) {
- error_report("vfio: failed to open /dev/vfio/vfio: %m");
- ret = -errno;
- goto put_space_exit;
- }
-
- ret = ioctl(fd, VFIO_GET_API_VERSION);
- if (ret != VFIO_API_VERSION) {
- error_report("vfio: supported vfio version: %d, "
- "reported version: %d", VFIO_API_VERSION, ret);
- ret = -EINVAL;
- goto close_fd_exit;
- }
-
- container = g_malloc0(sizeof(*container));
- container->space = space;
- container->fd = fd;
-
- if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) {
- ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd);
- if (ret) {
- error_report("vfio: failed to set group container: %m");
- ret = -errno;
- goto free_container_exit;
- }
-
- ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU);
- if (ret) {
- error_report("vfio: failed to set iommu for container: %m");
- ret = -errno;
- goto free_container_exit;
- }
-
- container->iommu_data.type1.listener = vfio_memory_listener;
- container->iommu_data.release = vfio_listener_release;
-
- memory_listener_register(&container->iommu_data.type1.listener,
- &address_space_memory);
-
- if (container->iommu_data.type1.error) {
- ret = container->iommu_data.type1.error;
- error_report("vfio: memory listener initialization failed for container");
- goto listener_release_exit;
- }
-
- container->iommu_data.type1.initialized = true;
-
- } else if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_IOMMU)) {
- ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd);
- if (ret) {
- error_report("vfio: failed to set group container: %m");
- ret = -errno;
- goto free_container_exit;
- }
-
- ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_SPAPR_TCE_IOMMU);
- if (ret) {
- error_report("vfio: failed to set iommu for container: %m");
- ret = -errno;
- goto free_container_exit;
- }
-
- /*
- * The host kernel code implementing VFIO_IOMMU_DISABLE is called
- * when container fd is closed so we do not call it explicitly
- * in this file.
- */
- ret = ioctl(fd, VFIO_IOMMU_ENABLE);
- if (ret) {
- error_report("vfio: failed to enable container: %m");
- ret = -errno;
- goto free_container_exit;
- }
-
- container->iommu_data.type1.listener = vfio_memory_listener;
- container->iommu_data.release = vfio_listener_release;
-
- memory_listener_register(&container->iommu_data.type1.listener,
- container->space->as);
-
- } else {
- error_report("vfio: No available IOMMU models");
- ret = -EINVAL;
- goto free_container_exit;
- }
-
- QLIST_INIT(&container->group_list);
- QLIST_INSERT_HEAD(&space->containers, container, next);
-
- group->container = container;
- QLIST_INSERT_HEAD(&container->group_list, group, container_next);
-
- return 0;
-
-listener_release_exit:
- vfio_listener_release(container);
-
-free_container_exit:
- g_free(container);
-
-close_fd_exit:
- close(fd);
-
-put_space_exit:
- vfio_put_address_space(space);
-
- return ret;
-}
-
-static void vfio_disconnect_container(VFIOGroup *group)
-{
- VFIOContainer *container = group->container;
-
- if (ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER, &container->fd)) {
- error_report("vfio: error disconnecting group %d from container",
- group->groupid);
- }
-
- QLIST_REMOVE(group, container_next);
- group->container = NULL;
-
- if (QLIST_EMPTY(&container->group_list)) {
- VFIOAddressSpace *space = container->space;
-
- if (container->iommu_data.release) {
- container->iommu_data.release(container);
- }
- QLIST_REMOVE(container, next);
- trace_vfio_disconnect_container(container->fd);
- close(container->fd);
- g_free(container);
-
- vfio_put_address_space(space);
- }
-}
-
-static VFIOGroup *vfio_get_group(int groupid, AddressSpace *as)
-{
- VFIOGroup *group;
- char path[32];
- struct vfio_group_status status = { .argsz = sizeof(status) };
-
- QLIST_FOREACH(group, &vfio_group_list, next) {
- if (group->groupid == groupid) {
- /* Found it. Now is it already in the right context? */
- if (group->container->space->as == as) {
- return group;
- } else {
- error_report("vfio: group %d used in multiple address spaces",
- group->groupid);
- return NULL;
- }
- }
- }
-
- group = g_malloc0(sizeof(*group));
-
- snprintf(path, sizeof(path), "/dev/vfio/%d", groupid);
- group->fd = qemu_open(path, O_RDWR);
- if (group->fd < 0) {
- error_report("vfio: error opening %s: %m", path);
- goto free_group_exit;
- }
-
- if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &status)) {
- error_report("vfio: error getting group status: %m");
- goto close_fd_exit;
- }
-
- if (!(status.flags & VFIO_GROUP_FLAGS_VIABLE)) {
- error_report("vfio: error, group %d is not viable, please ensure "
- "all devices within the iommu_group are bound to their "
- "vfio bus driver.", groupid);
- goto close_fd_exit;
- }
-
- group->groupid = groupid;
- QLIST_INIT(&group->device_list);
-
- if (vfio_connect_container(group, as)) {
- error_report("vfio: failed to setup container for group %d", groupid);
- goto close_fd_exit;
- }
-
- if (QLIST_EMPTY(&vfio_group_list)) {
- qemu_register_reset(vfio_reset_handler, NULL);
- }
-
- QLIST_INSERT_HEAD(&vfio_group_list, group, next);
-
- vfio_kvm_device_add_group(group);
-
- return group;
-
-close_fd_exit:
- close(group->fd);
-
-free_group_exit:
- g_free(group);
-
- return NULL;
-}
-
-static void vfio_put_group(VFIOGroup *group)
-{
- if (!QLIST_EMPTY(&group->device_list)) {
- return;
- }
-
- vfio_kvm_device_del_group(group);
- vfio_disconnect_container(group);
- QLIST_REMOVE(group, next);
- trace_vfio_put_group(group->fd);
- close(group->fd);
- g_free(group);
-
- if (QLIST_EMPTY(&vfio_group_list)) {
- qemu_unregister_reset(vfio_reset_handler, NULL);
- }
-}
-
static int vfio_populate_device(VFIODevice *vbasedev)
{
VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
@@ -3992,57 +3061,6 @@ error:
return ret;
}
-static int vfio_get_device(VFIOGroup *group, const char *name,
- VFIODevice *vbasedev)
-{
- struct vfio_device_info dev_info = { .argsz = sizeof(dev_info) };
- int ret;
-
- ret = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, name);
- if (ret < 0) {
- error_report("vfio: error getting device %s from group %d: %m",
- name, group->groupid);
- error_printf("Verify all devices in group %d are bound to vfio-<bus> "
- "or pci-stub and not already in use\n", group->groupid);
- return ret;
- }
-
- vbasedev->fd = ret;
- vbasedev->group = group;
- QLIST_INSERT_HEAD(&group->device_list, vbasedev, next);
-
- ret = ioctl(vbasedev->fd, VFIO_DEVICE_GET_INFO, &dev_info);
- if (ret) {
- error_report("vfio: error getting device info: %m");
- goto error;
- }
-
- vbasedev->num_irqs = dev_info.num_irqs;
- vbasedev->num_regions = dev_info.num_regions;
- vbasedev->flags = dev_info.flags;
-
- trace_vfio_get_device(name, dev_info.flags,
- dev_info.num_regions, dev_info.num_irqs);
-
- vbasedev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET);
-
- ret = vbasedev->ops->vfio_populate_device(vbasedev);
-
-error:
- if (ret) {
- vfio_put_base_device(vbasedev);
- }
- return ret;
-}
-
-void vfio_put_base_device(VFIODevice *vbasedev)
-{
- QLIST_REMOVE(vbasedev, next);
- vbasedev->group = NULL;
- trace_vfio_put_base_device(vbasedev->fd);
- close(vbasedev->fd);
-}
-
static void vfio_put_device(VFIOPCIDevice *vdev)
{
g_free(vdev->vbasedev.name);
@@ -4426,47 +3444,3 @@ static void register_vfio_pci_dev_type(void)
}
type_init(register_vfio_pci_dev_type)
-
-static int vfio_container_do_ioctl(AddressSpace *as, int32_t groupid,
- int req, void *param)
-{
- VFIOGroup *group;
- VFIOContainer *container;
- int ret = -1;
-
- group = vfio_get_group(groupid, as);
- if (!group) {
- error_report("vfio: group %d not registered", groupid);
- return ret;
- }
-
- container = group->container;
- if (group->container) {
- ret = ioctl(container->fd, req, param);
- if (ret < 0) {
- error_report("vfio: failed to ioctl container: ret=%d, %s",
- ret, strerror(errno));
- }
- }
-
- vfio_put_group(group);
-
- return ret;
-}
-
-int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
- int req, void *param)
-{
- /* We allow only certain ioctls to the container */
- switch (req) {
- case VFIO_CHECK_EXTENSION:
- case VFIO_IOMMU_SPAPR_TCE_GET_INFO:
- break;
- default:
- /* Return an error on unknown requests */
- error_report("vfio: unsupported ioctl %X", req);
- return -1;
- }
-
- return vfio_container_do_ioctl(as, groupid, req, param);
-}
new file mode 100644
@@ -0,0 +1,151 @@
+/*
+ * common header for vfio based device assignment support
+ *
+ * Copyright Red Hat, Inc. 2012
+ *
+ * Authors:
+ * Alex Williamson <alex.williamson@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ * Based on qemu-kvm device-assignment:
+ * Adapted for KVM by Qumranet.
+ * Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com)
+ * Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com)
+ * Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com)
+ * Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com)
+ * Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com)
+ */
+#ifndef HW_VFIO_VFIO_COMMON_H
+#define HW_VFIO_VFIO_COMMON_H
+
+#include "qemu-common.h"
+#include "exec/address-spaces.h"
+#include "exec/memory.h"
+#include "qemu/queue.h"
+#include "qemu/notify.h"
+
+/*#define DEBUG_VFIO*/
+#ifdef DEBUG_VFIO
+#define DPRINTF(fmt, ...) \
+ do { fprintf(stderr, "vfio: " fmt, ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) \
+ do { } while (0)
+#endif
+
+/* Extra debugging, trap acceleration paths for more logging */
+#define VFIO_ALLOW_MMAP 1
+#define VFIO_ALLOW_KVM_INTX 1
+#define VFIO_ALLOW_KVM_MSI 1
+#define VFIO_ALLOW_KVM_MSIX 1
+
+enum {
+ VFIO_DEVICE_TYPE_PCI = 0,
+};
+
+typedef struct VFIORegion {
+ struct VFIODevice *vbasedev;
+ off_t fd_offset; /* offset of region within device fd */
+ MemoryRegion mem; /* slow, read/write access */
+ MemoryRegion mmap_mem; /* direct mapped access */
+ void *mmap;
+ size_t size;
+ uint32_t flags; /* VFIO region flags (rd/wr/mmap) */
+ uint8_t nr; /* cache the region number for debug */
+} VFIORegion;
+
+typedef struct VFIOAddressSpace {
+ AddressSpace *as;
+ QLIST_HEAD(, VFIOContainer) containers;
+ QLIST_ENTRY(VFIOAddressSpace) list;
+} VFIOAddressSpace;
+
+struct VFIOGroup;
+
+typedef struct VFIOType1 {
+ MemoryListener listener;
+ int error;
+ bool initialized;
+} VFIOType1;
+
+typedef struct VFIOContainer {
+ VFIOAddressSpace *space;
+ int fd; /* /dev/vfio/vfio, empowered by the attached groups */
+ struct {
+ /* enable abstraction to support various iommu backends */
+ union {
+ VFIOType1 type1;
+ };
+ void (*release)(struct VFIOContainer *);
+ } iommu_data;
+ QLIST_HEAD(, VFIOGuestIOMMU) giommu_list;
+ QLIST_HEAD(, VFIOGroup) group_list;
+ QLIST_ENTRY(VFIOContainer) next;
+} VFIOContainer;
+
+typedef struct VFIOGuestIOMMU {
+ VFIOContainer *container;
+ MemoryRegion *iommu;
+ Notifier n;
+ QLIST_ENTRY(VFIOGuestIOMMU) giommu_next;
+} VFIOGuestIOMMU;
+
+typedef struct VFIODeviceOps VFIODeviceOps;
+
+typedef struct VFIODevice {
+ QLIST_ENTRY(VFIODevice) next;
+ struct VFIOGroup *group;
+ char *name;
+ int fd;
+ int type;
+ bool reset_works;
+ bool needs_reset;
+ VFIODeviceOps *ops;
+ unsigned int num_irqs;
+ unsigned int num_regions;
+ unsigned int flags;
+} VFIODevice;
+
+struct VFIODeviceOps {
+ void (*vfio_compute_needs_reset)(VFIODevice *vdev);
+ int (*vfio_hot_reset_multi)(VFIODevice *vdev);
+ void (*vfio_eoi)(VFIODevice *vdev);
+ int (*vfio_populate_device)(VFIODevice *vdev);
+};
+
+typedef struct VFIOGroup {
+ int fd;
+ int groupid;
+ VFIOContainer *container;
+ QLIST_HEAD(, VFIODevice) device_list;
+ QLIST_ENTRY(VFIOGroup) next;
+ QLIST_ENTRY(VFIOGroup) container_next;
+} VFIOGroup;
+
+void vfio_put_base_device(VFIODevice *vbasedev);
+void vfio_disable_irqindex(VFIODevice *vbasedev, int index);
+void vfio_unmask_single_irqindex(VFIODevice *vbasedev, int index);
+void vfio_mask_single_irqindex(VFIODevice *vbasedev, int index);
+void vfio_region_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size);
+uint64_t vfio_region_read(void *opaque,
+ hwaddr addr, unsigned size);
+void vfio_listener_release(VFIOContainer *container);
+int vfio_mmap_region(Object *vdev, VFIORegion *region,
+ MemoryRegion *mem, MemoryRegion *submem,
+ void **map, size_t size, off_t offset,
+ const char *name);
+void vfio_reset_handler(void *opaque);
+VFIOGroup *vfio_get_group(int groupid, AddressSpace *as);
+void vfio_put_group(VFIOGroup *group);
+int vfio_get_device(VFIOGroup *group, const char *name,
+ VFIODevice *vbasedev);
+
+extern const MemoryRegionOps vfio_region_ops;
+extern const MemoryListener vfio_memory_listener;
+extern QLIST_HEAD(vfio_group_head, VFIOGroup) vfio_group_list;
+extern QLIST_HEAD(vfio_as_head, VFIOAddressSpace) vfio_address_spaces;
+
+#endif /* !HW_VFIO_VFIO_COMMON_H */
@@ -1416,6 +1416,7 @@ vfio_pci_reset(const char *name) " (%s)"
vfio_pci_reset_flr(const char *name) "%s FLR/VFIO_DEVICE_RESET"
vfio_pci_reset_pm(const char *name) "%s PCI PM Reset"
+# hw/vfio/vfio-common.c
vfio_region_write(const char *name, int index, uint64_t addr, uint64_t data, unsigned size) " (%s:region%d+0x%"PRIx64", 0x%"PRIx64 ", %d)"
vfio_region_read(char *name, int index, uint64_t addr, unsigned size, uint64_t data) " (%s:region%d+0x%"PRIx64", %d) = 0x%"PRIx64
vfio_iommu_map_notify(uint64_t iova_start, uint64_t iova_end) "iommu map @ %"PRIx64" - %"PRIx64