@@ -5,7 +5,7 @@ Required properties:
- compatible: must be "resistive-adc-touch"
The device must be connected to an ADC device that provides channels for
position measurement and optional pressure.
-Refer to ../iio/iio-bindings.txt for details
+Refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details
- iio-channels: must have at least two channels connected to an ADC device.
These should correspond to the channels exposed by the ADC device and should
have the right index as the ADC device registers them. These channels
@@ -16,14 +16,14 @@ Optional subnodes:
The sub-functions of CPCAP get their own node with their own compatible values,
which are described in the following files:
-- ../power/supply/cpcap-battery.txt
-- ../power/supply/cpcap-charger.txt
-- ../regulator/cpcap-regulator.txt
-- ../phy/phy-cpcap-usb.txt
-- ../input/cpcap-pwrbutton.txt
-- ../rtc/cpcap-rtc.txt
-- ../leds/leds-cpcap.txt
-- ../iio/adc/cpcap-adc.txt
+- Documentation/devicetree/bindings/power/supply/cpcap-battery.txt
+- Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
+- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
+- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
+- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
+- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
+- Documentation/devicetree/bindings/leds/leds-cpcap.txt
+- Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
The only exception is the audio codec. Instead of a compatible value its
node must be named "audio-codec".
As documents have been renamed and moved around, their references will break, but this will be unnoticed, as the script which checks for it won't handle "../" references. So, replace them by the full patch. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../input/touchscreen/resistive-adc-touch.txt | 2 +- .../devicetree/bindings/mfd/motorola-cpcap.txt | 16 ++++++++-------- 2 files changed, 9 insertions(+), 9 deletions(-)