@@ -65,8 +65,6 @@
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP 0x1
-#define ESDHC_TUNING_BLOCK_PATTERN_LEN 64
-
/* pinctrl state */
#define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz"
#define ESDHC_PINCTRL_STATE_200MHZ "state_200mhz"
@@ -692,8 +690,6 @@ static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
/* FIXME: delay a bit for card to be ready for next tuning due to errors */
mdelay(1);
- /* This is balanced by the runtime put in sdhci_tasklet_finish */
- pm_runtime_get_sync(host->mmc->parent);
reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
ESDHC_MIX_CTRL_FBCLK_SEL;
@@ -704,54 +700,6 @@ static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS));
}
-static void esdhc_request_done(struct mmc_request *mrq)
-{
- complete(&mrq->completion);
-}
-
-static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode,
- struct scatterlist *sg)
-{
- struct mmc_command cmd = {0};
- struct mmc_request mrq = {NULL};
- struct mmc_data data = {0};
-
- cmd.opcode = opcode;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- data.blksz = ESDHC_TUNING_BLOCK_PATTERN_LEN;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.sg = sg;
- data.sg_len = 1;
-
- mrq.cmd = &cmd;
- mrq.cmd->mrq = &mrq;
- mrq.data = &data;
- mrq.data->mrq = &mrq;
- mrq.cmd->data = mrq.data;
-
- mrq.done = esdhc_request_done;
- init_completion(&(mrq.completion));
-
- spin_lock_irq(&host->lock);
- host->mrq = &mrq;
-
- sdhci_send_command(host, mrq.cmd);
-
- spin_unlock_irq(&host->lock);
-
- wait_for_completion(&mrq.completion);
-
- if (cmd.error)
- return cmd.error;
- if (data.error)
- return data.error;
-
- return 0;
-}
-
static void esdhc_post_tuning(struct sdhci_host *host)
{
u32 reg;
@@ -763,21 +711,13 @@ static void esdhc_post_tuning(struct sdhci_host *host)
static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
{
- struct scatterlist sg;
- char *tuning_pattern;
int min, max, avg, ret;
- tuning_pattern = kmalloc(ESDHC_TUNING_BLOCK_PATTERN_LEN, GFP_KERNEL);
- if (!tuning_pattern)
- return -ENOMEM;
-
- sg_init_one(&sg, tuning_pattern, ESDHC_TUNING_BLOCK_PATTERN_LEN);
-
/* find the mininum delay first which can pass tuning */
min = ESDHC_TUNE_CTRL_MIN;
while (min < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, min);
- if (!esdhc_send_tuning_cmd(host, opcode, &sg))
+ if (!mmc_send_tuning(host->mmc))
break;
min += ESDHC_TUNE_CTRL_STEP;
}
@@ -786,7 +726,7 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
max = min + ESDHC_TUNE_CTRL_STEP;
while (max < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, max);
- if (esdhc_send_tuning_cmd(host, opcode, &sg)) {
+ if (mmc_send_tuning(host->mmc)) {
max -= ESDHC_TUNE_CTRL_STEP;
break;
}
@@ -796,11 +736,9 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
/* use average delay to get the best timing */
avg = (min + max) / 2;
esdhc_prepare_tuning(host, avg);
- ret = esdhc_send_tuning_cmd(host, opcode, &sg);
+ ret = mmc_send_tuning(host->mmc);
esdhc_post_tuning(host);
- kfree(tuning_pattern);
-
dev_dbg(mmc_dev(host->mmc), "tunning %s at 0x%x ret %d\n",
ret ? "failed" : "passed", avg, ret);
Instead of having a local function taking care of sending the tuning command, let's use the common mmc_send_tuning() API provided by the mmc core. In this way the request will be handled as any other request by sdhci core. As an effect of this change, the pm_runtime_get_sync() call at esdhc_prepare_tuning() isn't needed any more. This patch will also introduce another change in behavior, since before the response pattern to the tuning command wasn't verified by sdhci-esdhc-imx. The mmc_send_tuning() does that. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> --- Changes in v2: Rebased, to get latest version of the mmc_send_tuning() API. --- drivers/mmc/host/sdhci-esdhc-imx.c | 68 ++------------------------------------ 1 file changed, 3 insertions(+), 65 deletions(-)