diff mbox series

mtd: parsers: trx: parse "firmware" MTD partitions only

Message ID 20210413163700.12215-1-zajec5@gmail.com
State New
Headers show
Series mtd: parsers: trx: parse "firmware" MTD partitions only | expand

Commit Message

Rafał Miłecki April 13, 2021, 4:37 p.m. UTC
From: Rafał Miłecki <rafal@milecki.pl>

Parsing every partition with "compatible" set to "brcm,trx" results in
parsing both: firmware partition and failsafe partition on devices that
implement failsafe booting. This affects e.g. Linksys EA9500 which has:

partition@200000 {
	reg = <0x0200000 0x01d00000>;
	compatible = "linksys,ns-firmware", "brcm,trx";
};

partition@1f00000 {
	reg = <0x01f00000 0x01d00000>;
	compatible = "linksys,ns-firmware", "brcm,trx";
};

Check for MTD partition name "firmware" before parsing. Recently added
ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on
bootloader setup.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
Vivek has recently reported this problem to me and this is soltuion I
came up with.

One alternative I thought of could be marking "failsafe" MTD partition
node as disabled (using of_update_property() + "status" + "disabled") and
then using of_device_is_available() in the parser_trx.c.

Let me know if you prefer the other (or any other) solution over this
patch.
---
 drivers/mtd/parsers/parser_trx.c | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Miquel Raynal April 16, 2021, 3:03 p.m. UTC | #1
Hi Rafał,

Rafał Miłecki <zajec5@gmail.com> wrote on Tue, 13 Apr 2021 18:37:00
+0200:

> From: Rafał Miłecki <rafal@milecki.pl>

> 

> Parsing every partition with "compatible" set to "brcm,trx" results in

> parsing both: firmware partition and failsafe partition on devices that

> implement failsafe booting. This affects e.g. Linksys EA9500 which has:

> 

> partition@200000 {

> 	reg = <0x0200000 0x01d00000>;

> 	compatible = "linksys,ns-firmware", "brcm,trx";

> };

> 

> partition@1f00000 {

> 	reg = <0x01f00000 0x01d00000>;

> 	compatible = "linksys,ns-firmware", "brcm,trx";

> };

> 

> Check for MTD partition name "firmware" before parsing. Recently added

> ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on

> bootloader setup.


I don't like very much the matching against a partition name, this is
and should probably remain free text. Why not matching against the
entire linksys,ns-firmware compatible instead?

> 

> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

> ---

> Vivek has recently reported this problem to me and this is soltuion I

> came up with.

> 

> One alternative I thought of could be marking "failsafe" MTD partition

> node as disabled (using of_update_property() + "status" + "disabled") and

> then using of_device_is_available() in the parser_trx.c.

> 

> Let me know if you prefer the other (or any other) solution over this

> patch.

> ---

>  drivers/mtd/parsers/parser_trx.c | 4 ++++

>  1 file changed, 4 insertions(+)

> 

> diff --git a/drivers/mtd/parsers/parser_trx.c b/drivers/mtd/parsers/parser_trx.c

> index 8541182134d4..0063791e164d 100644

> --- a/drivers/mtd/parsers/parser_trx.c

> +++ b/drivers/mtd/parsers/parser_trx.c

> @@ -58,6 +58,10 @@ static int parser_trx_parse(struct mtd_info *mtd,

>  	uint8_t curr_part = 0, i = 0;

>  	int err;

>  

> +	/* Don't parse any failsafe / backup partitions */

> +	if (strcmp(mtd->name, "firmware"))

> +		return -EINVAL;

> +

>  	parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition),

>  			GFP_KERNEL);

>  	if (!parts)





Thanks,
Miquèl
diff mbox series

Patch

diff --git a/drivers/mtd/parsers/parser_trx.c b/drivers/mtd/parsers/parser_trx.c
index 8541182134d4..0063791e164d 100644
--- a/drivers/mtd/parsers/parser_trx.c
+++ b/drivers/mtd/parsers/parser_trx.c
@@ -58,6 +58,10 @@  static int parser_trx_parse(struct mtd_info *mtd,
 	uint8_t curr_part = 0, i = 0;
 	int err;
 
+	/* Don't parse any failsafe / backup partitions */
+	if (strcmp(mtd->name, "firmware"))
+		return -EINVAL;
+
 	parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition),
 			GFP_KERNEL);
 	if (!parts)