@@ -50,6 +50,35 @@
static const char dwc2_driver_name[] = "dwc2";
+static const struct dwc2_core_params params_hi6220 = {
+ .otg_cap = 2, /* No HNP/SRP capable */
+ .otg_ver = 0, /* 1.3 */
+ .dma_enable = 1,
+ .dma_desc_enable = 0,
+ .speed = 0, /* High Speed */
+ .enable_dynamic_fifo = 1,
+ .en_multiple_tx_fifo = 1,
+ .host_rx_fifo_size = 512,
+ .host_nperio_tx_fifo_size = 512,
+ .host_perio_tx_fifo_size = 512,
+ .max_transfer_size = 65535,
+ .max_packet_count = 511,
+ .host_channels = 16,
+ .phy_type = 1, /* UTMI */
+ .phy_utmi_width = 8,
+ .phy_ulpi_ddr = 0, /* Single */
+ .phy_ulpi_ext_vbus = 0,
+ .i2c_enable = 0,
+ .ulpi_fs_ls = 0,
+ .host_support_fs_ls_low_power = 0,
+ .host_ls_low_power_phy_clk = 0, /* 48 MHz */
+ .ts_dline = 0,
+ .reload_ctl = 0,
+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+ GAHBCFG_HBSTLEN_SHIFT,
+ .uframe_sched = 0,
+};
+
static const struct dwc2_core_params params_bcm2835 = {
.otg_cap = 0, /* HNP/SRP capable */
.otg_ver = 0, /* 1.3 */
@@ -129,6 +158,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
static const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 },
+ { .compatible = "hisilicon,hi6220-usb", .data = ¶ms_hi6220 },
{ .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 },
{ .compatible = "snps,dwc2", .data = NULL },
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> --- drivers/usb/dwc2/platform.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)