diff mbox series

[-next,2/2] ath10k: add missing error return code in ath10k_pci_probe()

Message ID 20210522105822.1091848-3-yangyingliang@huawei.com
State New
Headers show
Series fix missing error code on path err_unsupported | expand

Commit Message

Yang Yingliang May 22, 2021, 10:58 a.m. UTC
When chip_id is not supported, the resources will be freed
on path err_unsupported, these resources will also be freed
when calling ath10k_pci_remove(), it will cause double free,
so return -ENODEV when it doesn't support the device with wrong
chip_id.

Fixes: c0c378f9907c ("ath10k: remove target soc ps code")
Fixes: 7505f7c3ec1d ("ath10k: create a chip revision whitelist")
Fixes: f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 463cf3f8f8a5..71878ab35b93 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3685,8 +3685,10 @@  static int ath10k_pci_probe(struct pci_dev *pdev,
 			ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
 		if (bus_params.chip_id != 0xffffffff) {
 			if (!ath10k_pci_chip_is_supported(pdev->device,
-							  bus_params.chip_id))
+							  bus_params.chip_id)) {
+				ret = -ENODEV;
 				goto err_unsupported;
+			}
 		}
 	}
 
@@ -3697,11 +3699,15 @@  static int ath10k_pci_probe(struct pci_dev *pdev,
 	}
 
 	bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
-	if (bus_params.chip_id == 0xffffffff)
+	if (bus_params.chip_id == 0xffffffff) {
+		ret = -ENODEV;
 		goto err_unsupported;
+	}
 
-	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
+	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
+		ret = -ENODEV;
 		goto err_unsupported;
+	}
 
 	ret = ath10k_core_register(ar, &bus_params);
 	if (ret) {