diff mbox series

[v1,1/4] ASoC: dt-bindings: nxp,tfa989x: Add tfa9897 support

Message ID 20210528105101.508254-1-vincent.knecht@mailoo.org
State Accepted
Commit 513df99993857863e42bf3d7d65d87c191ce9493
Headers show
Series [v1,1/4] ASoC: dt-bindings: nxp,tfa989x: Add tfa9897 support | expand

Commit Message

Vincent Knecht May 28, 2021, 10:50 a.m. UTC
Document TFA9897 bindings.

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
 Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Stephan Gerhold May 28, 2021, 11:40 a.m. UTC | #1
On Fri, May 28, 2021 at 12:50:58PM +0200, Vincent Knecht wrote:
> Document TFA9897 bindings.
> 
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>

Thanks!
Stephan

> ---
>  Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
> index 45db5776550c..46ddc1f3fc0c 100644
> --- a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
> +++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
> @@ -13,6 +13,7 @@ properties:
>    compatible:
>      enum:
>        - nxp,tfa9895
> +      - nxp,tfa9897
>  
>    reg:
>      maxItems: 1
> -- 
> 2.31.1
> 
> 
>
Stephan Gerhold May 28, 2021, 11:53 a.m. UTC | #2
On Fri, May 28, 2021 at 12:50:59PM +0200, Vincent Knecht wrote:
> Add specific init function to poke needed registers & values for this IC
> 
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
> ---
>  sound/soc/codecs/tfa989x.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/sound/soc/codecs/tfa989x.c b/sound/soc/codecs/tfa989x.c
> index 408e26eee108..6d94865c534b 100644
> --- a/sound/soc/codecs/tfa989x.c
> +++ b/sound/soc/codecs/tfa989x.c
> @@ -44,6 +44,7 @@
>  #define TFA989X_CURRENTSENSE4		0x49
>  
>  #define TFA9895_REVISION		0x12
> +#define TFA9897_REVISION		0x97
>  
>  struct tfa989x_rev {
>  	unsigned int rev;
> @@ -175,6 +176,29 @@ static const struct tfa989x_rev tfa9895_rev = {
>  	.init	= tfa9895_init,
>  };
>  
> +static int tfa9897_init(struct regmap *regmap)
> +{
> +	int ret;
> +
> +	/* Reduce slewrate by clearing iddqtestbst to avoid booster damage */
> +	ret = regmap_write(regmap, TFA989X_CURRENTSENSE3, 0x0300);
> +	if (ret)
> +		return ret;
> +
> +	/* Enable clipping */
> +	ret = regmap_clear_bits(regmap, TFA989X_CURRENTSENSE4, 0x1);
> +	if (ret)
> +		return ret;
> +
> +	/* Set required TDM configuration */
> +	return regmap_write(regmap, 0x14, 0x0);

For reference:

Sadly we didn't manage to figure out what exactly this register does.
There are several TDM related registers but they are not really
documented. Devices usually have fixed register values specified in some
configuration file, but it's not clear how to set these in a generic way
(e.g. based on dai->set_tdm_slot(), dai->set_tdm_slot() etc).

On the device where we tested TFA9897 it's just used with standard I2S
so we didn't need any special TDM configuration(?). I suppose we can
leave this open for future improvements if someone needs something
different here.

So:
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>

Thanks!
Stephan

> +}
> +
> +static const struct tfa989x_rev tfa9897_rev = {
> +	.rev	= TFA9897_REVISION,
> +	.init	= tfa9897_init,
> +};
> +
>  /*
>   * Note: At the moment this driver bypasses the "CoolFlux DSP" built into the
>   * TFA989X amplifiers. Unfortunately, there seems to be absolutely
> @@ -280,6 +304,7 @@ static int tfa989x_i2c_probe(struct i2c_client *i2c)
>  
>  static const struct of_device_id tfa989x_of_match[] = {
>  	{ .compatible = "nxp,tfa9895", .data = &tfa9895_rev },
> +	{ .compatible = "nxp,tfa9897", .data = &tfa9897_rev },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, tfa989x_of_match);
> -- 
> 2.31.1
> 
> 
>
Mark Brown June 2, 2021, 4:16 p.m. UTC | #3
On Fri, 28 May 2021 12:50:58 +0200, Vincent Knecht wrote:
> Document TFA9897 bindings.


Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/4] ASoC: dt-bindings: nxp,tfa989x: Add tfa9897 support
      commit: 513df99993857863e42bf3d7d65d87c191ce9493
[2/4] ASoC: codecs: tfa989x: Add support for tfa9897
      commit: 1ba1d69d8aa938f64cb07604b320a5074c3bb107
[3/4] ASoC: dt-bindings: nxp, tfa989x: Add vddd-supply property
      commit: 9cf1a98e2b0171e2586a13197a9a1ad605336166
[4/4] ASoC: codecs: tfa989x: Add support for optional vddd-supply
      commit: 8e5607e9941ce915187785bd09805bf7df9f7349

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
index 45db5776550c..46ddc1f3fc0c 100644
--- a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
+++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
@@ -13,6 +13,7 @@  properties:
   compatible:
     enum:
       - nxp,tfa9895
+      - nxp,tfa9897
 
   reg:
     maxItems: 1